Location: Lincoln City, OR
Company: Pacificorp
typically assigned to the Utility Specialist are Collections/Connects/Disconnects/Removal; Replacement or exchange of single-phase self-contained meters; locates; pole test and treat; Joint Use Coordination; Equipment Operation and others as agreed to by the Company and Union.
The Utility Specialist may be required to hold a Commercial Driving license as dictated by the assigned duties and pass minimum qualification requirements as mutually agreed to by the Company and the Union. The Utility Specialist with proper training may be assigned to drive or operate equipment, as follows: Pick-up, 6-person capacit Trucks, one and one-half (1 ½) Line Trucks (Boom Trucks) Trucks hauling poles,
material or towing a trailer (except hot line tool trailer) Trucks with hydraulic/electric personnel lift equipment Hole Digger Backhoe Track-type vehicles (snow-cats) Truck or trailer mounted wire pullers Jackhammer.
Responsibilities The Utility Specialist/Pre-Apprentice Lineman will perform physical labor necessary to assist with the installing, maintaining, repairing and/or operating Company equipment and facilities. Performance of duties may include: meter reading, collections, meter replacement/removal/exchange, pole test and treat, joint use coordination, equipment operation, clean-up work, debris removal, loading and unloading materials, storage of items, digging, grounds maintenance,
fueling vehicles, cleaning and painting equipment and performing work using various hand-held tools.
You may be required to drive a Company vehicle to transport personnel and equipment to and from work sites and run errands as assigned. Curriculum may include classroom work, on-the-job training, and completion of a skills check-off list to be jointly completed by a qualified employee and the Utility Specialist/Pre-Apprentice Lineman. Pacifi Corp and IBEW Local 659 will administer the apprenticeship program. Requirements Must be at least 18 years of age. Must have a high school diploma, GED, or proof of equivalent. Possess a current Driver's License with the ability to obtain a Class " A" Commercial Driver's License within six months of initial employment.
Prior to the first day performing work as an Utility Specialist/Pre-Apprentice Lineman, a CDL learners permit is required for the state the position is in. This can be obtained following a job offer during the pre-employment process. Must have received a passing score of 5 or higher on the NJATC examination. Must perform a mechanical skills evaluation (MSE). This evaluation is a variety of trade oriented tasks the applicant will be expected to perform routinely on the job. Individuals, who pass the aptitude test and MSE, must also successfully pass the interview and rating phase.
An interview panel will meet with each qualifying applicant and at the completion of the interview, determine a numerically rated score. Once selected for the Utility Specialist/Pre-Apprentice Lineman candidate list, applicants must pass a company-paid physical, drug screen and background check, which is processed after a job offer is extended and accepted. This position requires a post-offer, pre-placement physical capacity screening, conducted by a licensed physical therapist, to assure the candidate meets the physical demands of the job.
The screening will backss only the identified physical demands of the job being applied for. Physical Demands The job duties of Lineman require lifting in excess of 75 lbs from floor to waist and waist to overhead, carrying in excess of 75 lbs with both hands, and pushing and pulling in excess of 100 lbs of exertional force. Job duties of the Lineman require sustained, awkward positions/postures including bending and twisting at the waist and neck; reaching forward, to the side, across the body and overhead. Additional requirements of the Lineman position include forceful grip and pinch; manipulation of small objects; balancing on one or both legs during dynamic activities; manipulation of large objects during activities requiring balance and sustained awkward postures.
Additional Information Req Id: 110342 Company Code: Pacifi Corp Primary Location: Lincoln City, Oregon Department: Rocky Mountain Power Schedule: Full-Time Personnel Subarea: IBEW Local 659 Hiring Range: $33.85 per hour Benefits: Health care, retirement, paid time off, tuition assistance, paid short-term and long-term disability, paid bereavement leave. For more information, please visit: careers.
/content/New-Benefits-Page/? locale=en_US Employees must be able to perform the essential functions of the position with or without an accommodation. At Pacifi Corp, we celebrate diversity, equity and inclusion. Pacifi Corp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), interaction (including pregnancy), interactionual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.
S. federal law. All offers of employment are contingent upon the successful completion of a background check and drug screening.
for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Primary Purpose: A CMM Operator will inspect machined and un-machined castings, wax patterns, and fixtures using manual CMM and Automated CMM devices.
Essential Duties and Responsibilities: Inspect machined and un-machined castings, wax patterns and fixtures using Manual CMM and Automated CMM. Use of hand-held MTE will also be required (calipers, micrometers, bore gages, etc. ). Complete detailed inspection reports, as well as review/interrogate the dimensional data generated by the
CMM inspection. Communicate closely with engineering. Minimum Qualifications and Experience: Self-motivated individual with good math skills. Able to perform inspections on raw and machined castings, fixtures and first articles.
Ability to read blueprints and interpret customer specifications. Able to use Microsoft programs, i. e. Excel, Word, Outlook, Visio, etc. CAD experience helpful. Able to read and follow both verbal and written instructions, as well as excellent communication skills both written and oral. Capable of performing precise setups on machine. Possess a positive attitude and attention to detail. Able to push/pull/lift up to 50 lbs with or without reasonable accommodations.
Must be at least 18 years of age. HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered.
Solid job history including more than 1 year at previous or recent employer. Must be willing to undergo a pre-employment background check. Must be willing to participate in pre-employment and periodic drug screening. U. S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U. S. persons are U. S. citizens, legal permanent residents as defined by 8 U. S. C. 1101(a)(20) or protected individuals as defined by 8 U.
S. C. 1324b(a)(3). Preferred: 2 recent year of dimensional experience working on aerospace castings as well as on-the-job experience as a layout inspector, including ability to use inspection equipment including calipers, micrometers, bore gauges and height gages. Experience operating manual CMM, automated CMM or CNC machining center. Experience with Open Dmis and Calypso. CMM and CNC programming. CAD experience. Working Conditions: Frequently working near moving mechanical parts. Exposure to dust dirt fumes, noise and chemicals. The work is typically performed under reasonably good working conditions; while exposure to any or all of the mentioned elements may occur, such exposure is generally not present to the extent of being disagreeable.
Schedule: Weekend Day Shift (Friday-Sunday 5:00am-5:30pm) - $1.25/hr. Shift Differential Relocation assistance may be available to qualified candidates. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large " function critical" products. CPP provides its customers with a " total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry.
More information about our company can be found at: http: /// U. S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U. S. persons are U. S. citizens, legal permanent residents as defined by 8 U. S. C. 1101(a)(20) or protected individuals as defined by 8 U. S. C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, interaction, interactionual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status.
This is a non-management position This is a full time position
and are a world class supplier of titanium castings and components for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits!
Chemical milling is used in the aerospace industry to remove shallow layers of material from large aircraft components and extruded parts for aerospace parts and other components. Primary Purpose: Chem Mill Operators will be responsible for moving titanium castings by means of a large hand cart throughout the manufacturing area, performing sandblasting, and processing castings through a chemical milling process to specific
dimensions. Duties and Responsibilities: Move titanium castings by means of a large hand cart throughout the manufacturing area. Deliver castings to various departments.
Process castings through a chemical milling process to specific dimensions. Operate a wheelabrator. Operate a part dryer. Minimum Qualifications and Experience: Prior industry experience preferred. Able to understand, comprehend, and follow all verbal and written instructions. Compliance with general company attendance standard is required. Must be able to withstand long periods of standing and walking. HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience
will be considered. Must be at least 18 years of age. Solid job history including more than 1 year at previous or recent employer.
Must be able to lift up to 50 lbs with or without reasonable accommodations. Must be willing to undergo a pre-employment background check. Must be willing to participate in pre-employment and periodic drug screening. Working Conditions: Frequently works near moving mechanical parts. Exposure to dust. Noise level is within OSHA regulations. Air quality is below OR-OSHA limits. Schedule: Swing Shift (Monday-Thursday) - $1.00/hr. shift differential Weekend Day Shift (Friday-Sunday) - $1.25/hr. shift differential Weekend Graveyard Shift (Friday-Sunday) - $2.50/hour shift premium Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large " function critical" products.
CPP provides its customers with a " total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http: /// U. S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act.
U. S. persons are U. S. citizens, legal permanent residents as defined by 8 U. S. C. 1101(a)(20) or protected individuals as defined by 8 U. S. C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, interaction, interactionual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management position This is a full time position
We have multiple facilities in Albany, OR and are a world class supplier of titanium castings and components for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits!
Titanium investment casting is a manufacturing process that uses titanium, making an exact replica shape of an item. Melted titanium is poured into a wax pattern mold. Special ceramic material is then coated in the wax pattern mold and left to dry and harden. The mold is heated to let the wax melt and come out. The ceramic shell becomes an investment mold. Liquefied titanium is added
into the mold and cooled. The mold is then knocked off to reveal the replica. Primary Purpose: This operator runs and maintains the titanium casting furnace to produce castings or ingots.
Duties and Responsibilities: Operates and maintains titanium casting furnace. MIG weld electrodes to be used for the casting process. Complete all tracking and documentation as required. Adhere to all department and company procedures and policies. Load molds in burnout ovens. Train casting helpers. Maintain a clean, safe working environment. Participate in safety improvement through observations and teamwork improvement events. Be accountable for working safely by following all safety rules
and safe work practices. Meets established production rates consistent with quality expectations.
Assists with general departmental clean-up which may include sweeping and shoveling of debris. Other duties as assigned. Minimum Qualifications and Experience: Able to perform basic arithmetic. Mechanically inclined. Demonstrated ability to work in a team environment. Production operation experience preferred. MIG Welding experience helpful. Must be able to use and understand basic computer functions. HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered. Must be at least 18 years of age.
Must be able to lift up to 50 lbs with or without reasonable accommodations. Must be willing to undergo a pre-employment background check. Must be willing to participate in pre-employment and periodic drug screening. Must take a base line hearing test prior to starting. Working Conditions: The job is performed under reasonably good working conditions with some exposure to, noise, temperature, and machinery. Schedule: Weekend Day Shift - Friday-Sunday ($1.25/hr. shift differential) Weekend Graveyard Shift - Friday-Sunday ($2.50/hr. shift differential) Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large " function critical" products.
CPP provides its customers with a " total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http: /// U. S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act.
U. S. persons are U. S. citizens, legal permanent residents as defined by 8 U. S. C. 1101(a)(20) or protected individuals as defined by 8 U. S. C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, interaction, interactionual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management position This is a full time position
supplier of titanium castings for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Primary Purpose: Works in the Dimensional Inspection department to assemble castings on various tooling platforms.
Duties and Responsibilities: Install various hardware on machined aerospace products; rivets, nutplates, spring clamps, bushings, studs, threaded inserts, and adhering seals. Use tools such as: drill press, calipers, dyers, honing machine, pneumatic rivet squeezers. Operate sandblast equipment to sandblast machined parts. Other duties as assigned.
Minimum Qualifications, Abilities and Experience: Must be able to read and obtain a basic knowledge and understanding of blueprint specifications with on the job training.
Must have basic high-school level math skills including addition, subtraction, multiplication, and division. Able to use small, fine tools. Good attendance record required. Requires continuous mental and/or visual attention to detail. Able to understand measurements; read and use measurement tools correctly. Able to work as a team player and be self-motivated. Able to read, understand, and follow written and verbal instructions. HS diploma or equivalent GED required, but candidates not meeting this requirement
who possesses relevant experience will be considered. Must be at least 18 years of age.
Solid job history including more than 1 year at previous or recent employer. Must be able to lift up to 50 lbs with or without reasonable accommodations. Must be willing to undergo a pre-employment background check. Must be willing to participate in pre-employment and periodic drug screening. Working Conditions: Work is performed in a manufacturing environment Schedule: Swing Shift - Monday-Thursday ($1.00/hr. shift differential) Weekend Day Shift - Friday-Sunday ($1.25/hr. shift differential) Relocation assistance may be available to qualified candidates.
Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large " function critical" products. CPP provides its customers with a " total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http: /// U. S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act.
U. S. persons are U. S. citizens, legal permanent residents as defined by 8 U. S. C. 1101(a)(20) or protected individuals as defined by 8 U. S. C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, interaction, interactionual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management position This is a full time position
for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Primary Purpose: Chem Mill will be responsible for moving titanium castings by means of a large hand cart throughout the manufacturing area, performing sandblasting, and processing castings through a chemical milling process to specific dimensions.
Duties and Responsibilities: Move titanium castings by means of a large hand cart throughout the manufacturing area. Deliver castings to various departments. Process castings through a chemical milling process to specific dimensions. Operate
a wheelabrator. Operate a part dryer. May cross train to perform sandblasting; lift castings in and out of sandblast tanks. Minimum Qualifications and Experience: Prior industry experience preferred.
Able to understand, comprehend, and follow all verbal and written instructions. Compliance with general company attendance standard is required. Must be able to withstand long periods of standing and walking. HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered. Must be at least 18 years of age. Solid job history including more than 1 year at previous or recent employer. Must be able to lift up to
50 lbs with or without reasonable accommodations. Must be willing to undergo a pre-employment background check.
Must be willing to participate in pre-employment and periodic drug screening. Working Conditions: Frequently works near moving mechanical parts. Exposure to dust. Exposure to the following chemicals: Nitric Acid, H. F. acid, Caustic Soda, Palladium and Dura-Clean 283. Noise level is within OSHA regulations. Air quality is below OR-OSHA limits. Schedule: Swing Shift (Monday-Thursday 4:00pm-2:30am) - $1.00/hr. shift differential Relocation assistance may be available to qualified candidates. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large " function critical" products.
CPP provides its customers with a " total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http: /// U. S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U. S. persons are U.
S. citizens, legal permanent residents as defined by 8 U. S. C. 1101(a)(20) or protected individuals as defined by 8 U. S. C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, interaction, interactionual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management position This is a full time position
in Albany, OR and are a world class supplier of titanium castings and components for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits!
Titanium investment casting is a manufacturing process that uses titanium, making an exact replica shape of an item. Melted titanium is poured into a wax pattern mold. Special ceramic material is then coated in the wax pattern mold and left to dry and harden. The mold is heated to let the wax melt and come out. The ceramic shell becomes an investment mold. Liquefied titanium is added into the mold and cooled.
The mold is then knocked off to reveal the replica. Primary Purpose: This operator runs and maintains the titanium casting furnace to produce castings or ingots.
Duties and Responsibilities: Operates and maintains titanium casting furnace. MIG weld electrodes to be used for the casting process. Complete all tracking and documentation as required. Adhere to all department and company procedures and policies. Load molds in burnout ovens. Train casting helpers. Maintain a clean, safe working environment. Participate in safety improvement through observations and teamwork improvement events. Be accountable for working safely by following all safety rules and safe work practices.
Meets established production rates consistent with quality expectations.
Assists with general departmental clean-up which may include sweeping and shoveling of debris. Other duties as assigned. Minimum Qualifications and Experience: Able to perform basic arithmetic. Mechanically inclined. Demonstrated ability to work in a team environment. Production operation experience preferred. MIG Welding experience helpful. Must be able to use and understand basic computer functions. HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered. Must be at least 18 years of age. Must be able to lift up to 50 lbs with or without reasonable accommodations.
Must be willing to undergo a pre-employment background check. Must be willing to participate in pre-employment and periodic drug screening. Must take a base line hearing test prior to starting. Working Conditions: The job is performed under reasonably good working conditions with some exposure to, noise, temperature, and machinery. Schedule: Friday-Sunday 5:00am-5:30pm $1.25/shift differential Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large " function critical" products.
CPP provides its customers with a " total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http: /// U. S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U. S. persons are U. S. citizens, legal permanent residents as defined by 8 U. S. C. 1101(a)(20) or protected individuals as defined by 8 U.
S. C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, interaction, interactionual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management position This is a full time position
