Location: Apollo Beach, FL
Company: New Mexico Gas
on various capital projects and to the plant technical staff at Tampa Electric’s Generation and Energy Delivery facilities. Must demonstrate technical proficiency in broad program areas or one of specific importance, understanding scientific developments affecting the organization.
Emphasis for this position is on a comprehensive level of electrical engineering with equipment and processes commonly utilized in power plants, such as, but not limited to generators, transformers, protection systems, NERC regulatory requirements, inverters, renewable energy plants, AC/DC motors, electrical safety systems, excitation systems, control systems, emergency power systems, precipitators, energy
storage systems, and low/medium/high voltage switchgear. In a Leadership Capacity: Must be able to direct others; may have full responsibility for supervision, training, orientation, or the assignment of work to other employees; may have broad authority and responsibility for planning, developing and coordinating large segments of projects, programs or activities of major scope and significance to the Company In a Research or Consultant Capacity : Conceive, plan and conduct research in problem areas of considerable scope and complexity or serve as the technical specialist for the Company in the development and/or application of advanced theories and processes for an assigned area.
This
employee must be recognized as a company-wide expert in their respective field of study PRIMARY DUTIES AND RESPONSIBILITIES Work with station engineers to identify and solve complex O&M problems and technical issues.
Lead equipment life backssments, develop best practices and participate in and/or lead Root Cause Analysis investigations. Provide technical leadership and guidance on NERC regulatory standards. This will include coordinating efforts with various Tampa Electric departments namely Systems Planning, System Security, Regulatory and Renewables. Lead asset management teams on developing maintenance strategies. This will include implementing pilot programs, making improvements to existing systems and processes, and working with stakeholders on evaluating efficacy of such initiatives.
Monitor work activities of contractors assigned to him/her, and coordinate work with Asset Management, Project Management, Construction, plant outage coordinators, station planners and on-site and off-site contractors. Lead the development of scope of work, project schedules, and cost estimates for various projects. This will also include reviewing technical drawings and data for various projects. Develop and support discipline specific technical and regulatory training for Asset Management, Project Management, Energy Supply, and Delivery team members.
Supervision of Engineers, Co-ops, Maintenance Specialists and/or other resources. SUPERVISION Direct Supervision: Required: None, but wil ave full responsibility to supervise other employees, including engineers, technical staff, and Coops. Indirect Supervision: Education Required: Minimum of Bachelor of Science in Electrical Engineering from an ABET accredited four-year college. Licenses/Certifications Required: Registration as a Licensed Professional Engineer in the State of Florida for Principal Engineer Experience Required: Experience consists of work in heavy industry or utility business with a focus on Project Engineering or Plant Maintenance (Per policy 2.13) Required: Preferred: 12 years heavy industrial/power plant engineering/maintenance experience/project management.
Experience consists of work in heavy industry or utility business with a focus on Project Engineering or Plant Maintenance WORKING CONDITIONS This position requires working in an industrial environment (including heights and confined space) Working some overtime (weekends and holidays) Some travel locally, nationally and limited internationally.
This will include frequent travel to various Tampa Electric facilities. This position will require 100% onsite presence at a facility or plant. PHYSICAL DEMANDS/ REQUIREMENTS This position requires climbing stairs and scaffolding, utilizing safety harnesses, ability to stand and walk for extended periods, working in noise, working at solar sites, dust, heat, and high humidity areas while utilizing personnel protection equipment. Flexibility to crawl in and out of tight confined areas.
As an Amazonian you will work in some of the most sophisticated, safe, and secure data centers in the world. Our Chief Engineers help keep them that way by working with the brightest minds from around the globe to help test and implement the newest technology and work practices to meet the demands of a changing market.
We have a passion for learning and evolving, it’s how we have helped define ourselves as leaders in the industry. This position requires you to be an energetic self-starter who will be provided an overall direction the facility needs to be heading. It is expected that, with that provided direction, you are able to ensure all work is scheduled and performed to help meet
our goals. This job also requires a strong mechanical and electrical background and the ability to create strong working relationships with internal and external groups.
Each day you will look at the schedule of current and upcoming work, check on the progress of the maintenance work orders being ready to work, assign tasks to the EOTs, ensure PMs are being performed and completed in the tracking tool, and escalate any issues to the Facility Manager. It is expected that you are the owner of the work going on in your building and work with the FM to ensure our success. Act as an escalation point for all facilities-related issues. - Oversee operation and management of routine and emergency
services on a variety of critical systems such as: switchgear, generators, UPS systems, power distribution equipment, chillers, cooling towers, computer room air handlers, building monitoring systems, etc.
- Drive projects with moderate complexity. - Perform root cause analysis of equipment failures. - Provide training and guidance to Engineering Operations Technicians and responsible for working with Facility Manager (FM) to set team culture. - Responsible for drills that are building specific and identifying team/individual areas for improvement. Also responsible for working with FM to help improve on the identified weakness. - Create and deploy ensure compliance for new standard practices for Engineering Operations Technicians, and vendor support teams.
- Establish building performance benchmarks, conduct analyses, and prepare reports on all aspects of the critical facility operations and maintenance. - May assist in the design and build out of new facilities. - Work with IT managers and other business leaders to coordinate projects, manage capacity, and optimize plant safety, performance, reliability and efficiency. - Respond to out of hours emergency calls – second level escalation point for Data Center facilities related issues / failures.
- Some travel may be required. - Walk job sites in uneven terrain. Technical (Military/Trade School) training or degree in a relevant field (for example: electrical, mechanical). - 5+ years of electrical or mechanical experience. - 4+ years of data center or mission critical facilities (example: hospital, military facility, public safety facility, etc. ) 5+ years of experience MS Office Suite experience. 4+ years of Data Center Engineering Experience. - Associates or Bachelor’s Degree. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, interactionual orientation, protected veteran status, disability, age, or other legally protected status.
For individuals with disabilities who would like to request an accommodation, please visit For more details: jobs-search. org/manufacturing_umatilla-c427448/data-center-chief-engineer-night-shift-umatilla_i1956623357
architecture design, logic design, and system simulation. Assignments include the analysis of all aspects from high-level design to synthesis, place and route, and timing and power utilization. Typically uses specialized equipment to establish operation data, conduct experimental tests, and evaluate results.
Support Circuit card designer with trade studies. Develop and release design requirement specifications for product. Support of production environment in debugging and troubleshooting FPGA related issues in a production environment will be a critical component of this particular role. Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler
America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce.
We recognize that we thrive on diversity and inclusion for the benefit of our employees, our customers, and the communities where we are located. Employment decisions are made without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, interactionual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.?
maintains equipment, components, devices, or systems. Works from engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
Education and Experience: HS diploma + 3-5 years related experience or Vocation training okay. Benefits provided: 401K Medical, dental, and vision Sick time as applicable to state law Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we
are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity and inclusion for the benefit of our employees, our customers, and the communities where we are located.
Employment decisions are made without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, interactionual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
with signal integrity/power integrity of a design and can ensure a proper layout. The design engineer is responsible for device evaluation and characterization, test box design, prototype construction and checkout, and determination of wafer fabrication processes.
Prepares test methods and specifications; analyzes equipment to establish operating data and conducts experimental tests; provides finished device approval; and prepares customer application information. The engineer should be capable of designing major components, or major portions of a functional system, or technically advanced prototype, promotional or specific products. Develop or improve products and facilitate manufacturing
operations. Develops basic data and notes necessary to present design proposal. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost.
Coordinates with other organizations affected by design development. Makes layouts of assemblies and details parts of devices, mechanisms, structures, and products. Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning. Identifies design errors, omissions, and other deficiencies,
and recommends revisions and/or improvements in design layout to responsible engineers or designers.
Expected to have the capability to lead a small team of other design engineers and communicate effectively with the customers. Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity and inclusion for the benefit of our employees, our customers, and the communities where we are located.
Employment decisions are made without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, interactionual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
