Location: Punta Gorda, FL
Company: Penske
at Charlotte Correctional Institution in the Maintenance Unit.
This is not a classroom position. SALARY: $44,786.82 - annually SALARY WILL BE DETERMINED IN ACCORDANCE WITH CURRENT PAY POLICY. EMPLOYEES ARE NORMALLY HIRED AT THE APPOINTMENT RATE.
Under the direction of Secretary, Ricky Dixon, the Florida Department of Corrections (FDC) is the 3rd largest state prison system in the country with a budget of 2.4 billion, approximately 97,000 inmates incarcerated and another 167,000 offenders on active community supervision. The DC has 151 facilities and more than 24,000 staff members statewide, making it the State’s largest agency. SPECIFIC DUTIES AND RESPONSIBILITIES: This working
position is responsible for the Waste/Wastewater Treatment Plant at a Correctional Institution both in operations and maintenance. This position also instructs inmates in the special skills necessary to operate a Water and Wastewater Treatment Plant through an apprentice on-the-job training program designed to develop experience and skills necessary to assume and fulfill the position of Operator of a water or sewer utility.
Operates and maintains Water Treatment Plant and Wastewater Treatment Plant in compliance with the DEP permit and DEP rules and regulations. Carries out the preventive maintenance program for both plants. Orders and stocks all chemicals used in the operation process.
Repairs all breakdowns which can be done at the operator level and troubleshoots other specialized equipment for the utility operation such as compressors, pumps, air blowers, chlorinators, etc.
Cleans bar screens, grit chamber, settling, and sludge beds as necessary. Collects samples and performs tests including, but not limited to dissolved oxygen, total solids, suspended solids, settle able solids, biological oxygen demands, and acid or alkaline tests. Prepares reports as required on plant operations from the results of daily tests. Maintains and operates logs and related records. Prepares progress and performance reports for assigned inmates for use by the inmate’s classifications team in measuring and determining the rehabilitative progress of the assigned inmate consistent with motivation needs and the development of a positive approach to rehabilitation efforts.
Maintains custody and control of inmates assigned under the supervision of the position in accordance with accountability requirements for inmates outlined in operational procedures. Participates in required departmental staff training to enhance background and ability. Performs other related duties as required. Essential/Entry Level KSA’s: Ability to communicate technical information effectively.
Ability to perform technical engineering tasks. Ability to interpret engineering data. Ability to read blueprints and schematic drawings. Ability to establish and maintain a working relationship with others. Ability to work in a training capacity with people in individual and group settings. Ability to collect, record, and evaluate data relating to the training of individuals. Ability to prepare and maintain records and other instruction materials. Ability to work independently. Ability to speak clearly and correctly to individuals and groups. Ability to plan, organize, and coordinate work assignments.
Ability to communicate effectively. Required Qualifications: A high school diploma or equivalent At least three (3) years of experience in the Wastewater/Water Treatment Plant field A Class C Water and Wastewater Treatment Plant Operator License A Valid Class E Driver’s License NOTE: Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. If you are interested in this position and meet the above indicated qualification and have the desired education, knowledge and experience, please submit a State of Florida Application and resume through the People First system.
If you experience problems applying on-line, please call the People First Service Center at -xyz X. Applications will be accepted until 11:59 PM on the closing date. Successful applicant must pass a background screening and fingerprinting. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center -xyz X).
Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F. S. Drug-Free Workplace Act. VETERANS’ PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans’ Preference will receive preference in employment for Career Service vacancies and are encouraged to apply.
Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans’ Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans’ Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement.
As an Amazonian you will work in some of the most sophisticated, safe, and secure data centers in the world. Our Chief Engineers help keep them that way by working with the brightest minds from around the globe to help test and implement the newest technology and work practices to meet the demands of a changing market.
We have a passion for learning and evolving, it’s how we have helped define ourselves as leaders in the industry. This position requires you to be an energetic self-starter who will be provided an overall direction the facility needs to be heading. It is expected that, with that provided direction, you are able to ensure all work is scheduled and performed to help meet
our goals. This job also requires a strong mechanical and electrical background and the ability to create strong working relationships with internal and external groups.
Each day you will look at the schedule of current and upcoming work, check on the progress of the maintenance work orders being ready to work, assign tasks to the EOTs, ensure PMs are being performed and completed in the tracking tool, and escalate any issues to the Facility Manager. It is expected that you are the owner of the work going on in your building and work with the FM to ensure our success. Act as an escalation point for all facilities-related issues. - Oversee operation and management of routine and emergency
services on a variety of critical systems such as: switchgear, generators, UPS systems, power distribution equipment, chillers, cooling towers, computer room air handlers, building monitoring systems, etc.
- Drive projects with moderate complexity. - Perform root cause analysis of equipment failures. - Provide training and guidance to Engineering Operations Technicians and responsible for working with Facility Manager (FM) to set team culture. - Responsible for drills that are building specific and identifying team/individual areas for improvement. Also responsible for working with FM to help improve on the identified weakness. - Create and deploy ensure compliance for new standard practices for Engineering Operations Technicians, and vendor support teams.
- Establish building performance benchmarks, conduct analyses, and prepare reports on all aspects of the critical facility operations and maintenance. - May assist in the design and build out of new facilities. - Work with IT managers and other business leaders to coordinate projects, manage capacity, and optimize plant safety, performance, reliability and efficiency. - Respond to out of hours emergency calls – second level escalation point for Data Center facilities related issues / failures.
- Some travel may be required. - Walk job sites in uneven terrain. Technical (Military/Trade School) training or degree in a relevant field (for example: electrical, mechanical). - 5+ years of electrical or mechanical experience. - 4+ years of data center or mission critical facilities (example: hospital, military facility, public safety facility, etc. ) 5+ years of experience MS Office Suite experience. 4+ years of Data Center Engineering Experience. - Associates or Bachelor’s Degree. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, interactionual orientation, protected veteran status, disability, age, or other legally protected status.
For individuals with disabilities who would like to request an accommodation, please visit For more details: jobs-search. org/manufacturing_umatilla-c427448/data-center-chief-engineer-night-shift-umatilla_i1956623357
architecture design, logic design, and system simulation. Assignments include the analysis of all aspects from high-level design to synthesis, place and route, and timing and power utilization. Typically uses specialized equipment to establish operation data, conduct experimental tests, and evaluate results.
Support Circuit card designer with trade studies. Develop and release design requirement specifications for product. Support of production environment in debugging and troubleshooting FPGA related issues in a production environment will be a critical component of this particular role. Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler
America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce.
We recognize that we thrive on diversity and inclusion for the benefit of our employees, our customers, and the communities where we are located. Employment decisions are made without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, interactionual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.?
maintains equipment, components, devices, or systems. Works from engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
Education and Experience: HS diploma + 3-5 years related experience or Vocation training okay. Benefits provided: 401K Medical, dental, and vision Sick time as applicable to state law Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we
are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity and inclusion for the benefit of our employees, our customers, and the communities where we are located.
Employment decisions are made without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, interactionual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
with signal integrity/power integrity of a design and can ensure a proper layout. The design engineer is responsible for device evaluation and characterization, test box design, prototype construction and checkout, and determination of wafer fabrication processes.
Prepares test methods and specifications; analyzes equipment to establish operating data and conducts experimental tests; provides finished device approval; and prepares customer application information. The engineer should be capable of designing major components, or major portions of a functional system, or technically advanced prototype, promotional or specific products. Develop or improve products and facilitate manufacturing
operations. Develops basic data and notes necessary to present design proposal. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost.
Coordinates with other organizations affected by design development. Makes layouts of assemblies and details parts of devices, mechanisms, structures, and products. Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning. Identifies design errors, omissions, and other deficiencies,
and recommends revisions and/or improvements in design layout to responsible engineers or designers.
Expected to have the capability to lead a small team of other design engineers and communicate effectively with the customers. Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity and inclusion for the benefit of our employees, our customers, and the communities where we are located.
Employment decisions are made without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, interactionual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
