Location: Elwood, IL
Company: Stepan Company
of efficiency and effectiveness tools, the ability to perform problem analysis at both a strategic and functional level, and experience managing cross-functional teams and projects. • Identify, develop, and execute improvement projects in the areas of plant productivity, product quality, EHS performance, reliability, and profitability (Cost-Out) aligned with the site priorities and Optimization Engineering Team’s portfolio.
• Lead cross-function teams focused on process improvement and optimization and manage the development of short-term/long-term initiatives, schedule, budget, and implementation. • Develop Engineering Requests for Cap Ex implementation of aligned improvement projects
including process design input, justification, and implementation. • Participate in the capital project design and review process on key projects with a focus on maximizing process capability, product quality and process uptime.
• Identify projects to improve process performance and equipment reliability by identifying and correcting root cause of chronic problems and special causes. • Support and promote CI initiatives throughout the site including implementation of a Management Operating System (MOS) and Production Loss Accounting System (PLAS) process and provide coaching and facilitation to area leaders and employees to ensure adoption. • Collect and analyze KPI, process, and quality
data to drive project selection, optimization, and implementation.
• Support strategic quality initiatives through analysis of production practices and monitoring of quality process and standards compliance within the production environment. • Work cross-functionally with Accounting, Finance, and others to ensure alignment on project value benefits. Validate project analysis and Cost-Out results calculations are accurate and deliver stated benefits. • Participate and maintain compliance related activities including internal and external audits for applicable standards and certifications such as ISO 9001:2015, EFf CI, FSSC 22000, Kosher, Halal, RSPO, ISCC+ and others.
Qualifications • Minimum of 5 years of experience is required. • Have working knowledge of lab practices, manufacturing practices, continuous improvement, and process optimization. • Experience managing projects and cross-functional teams within chemical and/or manufacturing environments. • Experience with Kaizen, RCFA, SPC, VSM, LPA, DMAIC, 5 Why, FMEA preferred. Education • Bachelor’s Degree in Chemical Engineering or Engineering is required. #LI-KB1 #LI-ONSITE Stepan Company does not accept or retain unsolicited resumes or phone calls and/or respond to them or to any third party representing job seekers.
Established in 1932, Stepan Company is a major manufacturer of basic and intermediate chemicals including surfactants, polymers, as well as specialty ingredients that go into consumer, household, and institutional products such as laundry detergents, shampoos, and surface cleaners. Stepan Company currently has 22 global manufacturing locations and over 2,500 employees. We have a strong record of growth. Our growth allows us to provide meaningful career opportunities and stability to our team members. We have big goals at Stepan and know every team member will be crucial to achieving our objectives.
Regardless of function, we are looking for team members who bring with them a growth mindset, an entrepreneurial spirit, and the ability to thrive in an evolving environment. We celebrate diversity at Stepan and are committed to creating a diverse, inclusive environment. We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, interaction, gender, gender identity or expression, interactionual orientation, national origin, genetic information, disability, age, veteran status, or any other status protected by applicable law.
direct impact on the organization and gain hands-on, real world work experience alongside our experienced engineers and operators in a chemical manufacturing plant. Key Responsibilities Support 6 Sigma and Kaizen projects for continuous improvement Support the Sulfonation operating area with unplanned downtime improvement efforts Support development and implementation of additional checklists and work instructions for production areas Support training development and management of change Collaborate with cross functional team Actively participate and contribute to safety programs Assist operations and maintenance with troubleshooting, root cause analysis, and problem solving Participate in process
safety management activities and reviews Qualifications Broad technical knowledge in general engineering principles Ability to organize, prioritize, and work independently Excellent teamwork and communication skills, both verbal and written Demonstrated problem solving skills and attention to detail Education Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future.
Candidates who must have equivalent credits towards a sophomore or junior grade level. Candidates must be enrolled at an accredited college or university, pursuing BS in Chemical Engineering or Mechanical Engineering Summer term candidates
must be available to work full-time for a minimum of 3 months (June – August).
Stepan does not offer housing or housing stipends for this Co-Op program. Candidates must have their own means of transportation. #LI-NK1 #LI-Onsite #LI-Intern Established in 1932, Stepan Company is a major manufacturer of basic and intermediate chemicals including surfactants, polymers, as well as specialty ingredients that go into consumer, household, and institutional products such as laundry detergents, shampoos, and surface cleaners. Stepan Company currently has 22 global manufacturing locations and over 2,500 employees. We have a strong record of growth. Our growth allows us to provide meaningful career opportunities and stability to our team members.
We have big goals at Stepan and know every team member will be crucial to achieving our objectives. Regardless of function, we are looking for team members who bring with them a growth mindset, an entrepreneurial spirit, and the ability to thrive in an evolving environment. We celebrate diversity at Stepan and are committed to creating a diverse, inclusive environment. We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, interaction, gender, gender identity or expression, interactionual orientation, national origin, genetic information, disability, age, veteran status, or any other status protected by applicable law.
has a key role within the organization that will manage production support engineering for a range of product groups. The successful candidate will have visibility across many functional groups (engineering, operations, maintenance, etc. ) and will continuously drive to optimize efficiency, reliability, safety, environmental, and cost.
Job Responsibilities Support all Environmental, Health, and Safety programs, policies, and regulations. Manages production support engineering for a group of products after transfer from design to production. Interfaces with design, process, R&D, reliability, and quality teams to solve production problems. Sustains products with cost reductions and yield
improvements. Performs various aspects of process engineering work, heat transfer, equipment performance calculations. Monitor daily operations, production rates and product quality.
Continuously make key decisions to improve process efficiencies both in regard to quality and productivity. In collaboration with process control develop process control strategy, maintain control system code, and ensure that historical performance data is maintained. Assist operations in technical training to develop operations team on technical aspects of process and equipment. Network with other engineers externally to the plant and leverage share plant improvement learnings. Analyze data to identify root
causes of defects and implement appropriate countermeasures. This list is not all-inclusive and may include other duties as assigned and necessary for the operation and management of the shift and overall plant.
Qualifications Bachelor’s degree in engineering from an accredited university. Minimum of 3 years’ experience in a chemical production environment with demonstrated ability to apply problem solving skills to lead improvement efforts. Desired Characteristics Strong interpersonal skills with the ability to empower and lead non-exempt work teams. Demonstrated knowledge and commitment to Process Safety Management and ISO 9000/QS 9001 quality systems.
Six Sigma or LEAN Manufacturing experience Ability to make data driven decisions and utilize Six Sigma and Lean tools. Knowledge of safety agency regulations Strong background in the interpretation of engineering drawings / specifications and manufacturing processes. Strong organizational skills with a high attention to detail. Ability to manage multiple assignments. Knowledge of ISO / quality procedures Strong analytical and problem-solving skills. Strong oral and written communication skills. Strong interpersonal and leadership skills. Six Sigma training or equivalent Quality certification.
technology. Primary Responsibilities Modify, maintain, repair electronics equipment and systems to ensure proper functioning. Set up and operate specialized and standard test equipment to diagnose, test and analyze the performance of electronic components or systems.
Design, program, test, and resolve faults for PLC-related architecture for automated material handling applications. Replace defective components or parts, using hand tools and precision instruments. Work with onsite teams to identify and resolve equipment issues. Travel extensively in support of onsite teams. Knowledge, Skills and Abilities Basic knowledge of industrial automation Complex problem solving and deductive reasoning
Knowledge of PLC programming (Siemens knowledge is a plus) Understanding of electrical motors, servo motors, and VFD/Servo drives Basic knowledge of AC and DC control systems Ability to read and understand electrical schematics, wiring diagrams and drawings (experience with Auto CAD is a plus) Experience in troubleshooting electrical control systems Interact with customers in a professional manner Work effectively in a team and individual setting Comfortable working at heights Associate degree in Electrical Engineering, Electronics, Industrial Maintenance, Mechatronics, or closely related field Previous electrical experience Familiarity with PLC programming, especially in industrial applications, is a plus Availability to travel frequently to various locations in the U.
S. Canada, and Europe (approximately 70% or more) Job Posted by Applicant Pro
portfolio now spans power management, connected sensors, optical transceivers, antenna tuning and RF frontends. These intelligent and efficient semiconductors enable advanced modules for smartphones, base stations, personal computers, electric vehicles, data centers, Io T devices and healthcare.
From headquarters in San Diego and offices around the world, p Semi’s team explores new ways to make electronics for the connected world smaller, thinner, faster and better. Job Duties: Design validation, characterization and product development of RF ICs in p Semi’s Ultra CMOS technology for mobile wireless RF front end semiconductor products for cellular handsets and commercial/industrial applications.
Product lines include high performance RF switches, PA controllers (PAC’s), power amplifiers, low noise amplifiers, digital tunable capacitors and IC filters.
Work on RF and analog measurements combined with disciplined project planning to ensure only the highest quality products are released. Support other essential disciplines including marketing and applications, project management, design, production, and test engineering. Work very closely with the design team to understand the part operation and device. Position requires 10% domestic travel. Company will pay all travel expenses. Required education : Master of Science or equivalent in Electrical Engineering Additional minimum requirements
: academic coursework, internship, or work experience to include at least one academic semester, or 6 months of experience in the following: S-Parameters, impedance matching, standard microwave CAD tools (ADS, HFSS); Two port matching, noise figure (NF), non- linear analysis; Smith chart and matching, linearity (P1d B, IIP3); Matlab.
40 hours/ week. Job site: Arlington Heights, Cook County IL. Salary $110000 - $120000/ year. EOE p Semi Corporation supports a diverse workforce and is committed to a policy of equal employment opportunity for applicants and employees. p Semi does not discriminate on the basis of age, race, color, religion (including religious dress and grooming practices), interaction/gender (including pregnancy, childbirth, or related medical conditions or breastfeeding), gender identity, gender expression, genetic information, national origin (including language use restrictions and possession of a driver’s license issued under Vehicle Code section 12801.9), ancestry, physical or mental disability, legally-protected medical condition, military or veteran status (including “protected veterans” under applicable affirmative action laws), marital status, interactionual orientation, or any other basis protected by local, state or federal laws applicable to the Company.
p Semi also prohibits discrimination based on the perception that an employee or applicant has any of those characteristics, or is associated with a person who has or is perceived as having any of those characteristics. Note: The Peregrine Semiconductor name, Peregrine Semiconductor logo and Ultra CMOS are registered trademarks and the p Semi name, p Semi logo, Ha RP and Du NE are trademarks of p Semi Corporation in the U. S. and other countries. All other trademarks are the property of their respective companies. p Semi products are protected under one or more of the following U. S. Patents: http: //patents.
