Location: Montville, NJ
Company: Marotta Controls
products and solutions that aim to improve clinical results and optimize workflows. Every day we collaborate to make a true difference for our customers - and to save more lives. Are you looking for an inspiring career? You just found it. Lead and coordinate efforts for engineering support to the manufacturing areas in equipment design, process improvements, cost improvements, process troubleshooting and compliance efforts.
The qualified applicants will be responsible for the following: Coordinate projects and lead junior engineers in the development, qualification, and implementation of new or modified products or processes. Prepares technical reports, analysis, recommendations and
presentations reflecting the status and results of projects in progress on a regular basis Draft protocols and manage all phases of equipment and process validations.
Lead efforts for re-design, repair or replacement of in-process production program equipment and tooling. Develop processes, methods, tooling and production controls for new equipment. Evaluates internal and external technologies to solve complex problems. Prepare capital appropriation requests providing required evaluation, analysis and supporting justification. May supervise other technicians and engineers. This is not an inclusive list of job responsibilities. The ideal candidate must have: This position requires
a Bachelor's degree (or equivalent) in Chemical, Mechanical, or Biomedical Engineering or other related technical degree.
A Master's degree in Engineering is preferred. A minimum of 5 years in manufacturing and/or process engineering required or Master's degree plus 3 years. Seven to ten years' experience in the medical device, medical, textile or other FDA regulated industry is ideal. Previous experience in the Class III implantable industry would be a definite plus. Required Knowledge, Skills and Abilities: Previous working knowledge in the following areas is required: design control, remediation, manufacturing process support, and process development.
Experience with design and process FMEAs is highly desirable. Working knowledge with continuous improvement processes, Kanban, equipment design, re-tooling, re-engineering and automation of production processes is a plus. Position requires a sound statistical background. Must have experience performing various types of statistical analysis and be able to demonstrate expertise and leadership in the use of statistical analysis techniques. Experience with DOEs is highly desirable. Ability to manage complex projects and multiple priorities is required. Must be able to drive results and work effectively in a team setting.
Previous supervisory experience is a plus. Must demonstrate effective verbal and written communication and the ability to make presentations to all levels of the organization. Must demonstrate sound judgment, be well organized, take initiative, and be flexible. Must demonstrate ability to work well under pressure, work effectively with both employees and management and be able to facilitate resolution of fairly complex issues. Proficiency with Microsoft Office, Solid Works, Mini Tab or equivalent software applications is preferred. Previous working knowledge of SAP or equivalent system is highly desirable.
Salary Range: $95k - $125K Remote Work: 1-2 days Benefits at Getinge: At Getinge, we offer a comprehensive benefits package, which includes: Health, Dental, and Vision insurance benefits 401k plan with company match Paid Time Off Wellness initiative & Health Assistance Resources Life Insurance Health and Dependent Care Flexible Spending Accounts Commuter Benefits Parental and Caregiver Leave Getinge is on an exciting transformation journey constantly looking for new ways to innovate together with our customers to meet the healthcare challenges of the future.
Our passionate people hold our brand promise 'Passion for Life' close to heart. Interested candidates please apply. Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, interaction, interactionual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law. We look forward to receiving your application. If you share our passion and believe that saving lives is the greatest job in the world, then we look forward to receiving your application.
We hope you will join us on our journey to become the world's most desired medtech company. INDLGPDN-9adbc-9798-a1e3cb921c55
The engineer shall work within a multi-disciplined organization and enlist the help of other disciplines when necessary, such as other engineers, manufacturing, purchasing, and quality assurance. Design Electromechanical Actuators from a blank sheet of paper to meet customer requirements.
Design of spur, bevel, worm, and planetary gears Design and analysis of kinematic mechanisms i. e. Slider Crank, Scotch Yoke, 4-Bar Sizing and selection of Ball Screws capable of meeting system performance requirements Sizing and selection of Bearings (Radial, Thrust, Angular contact) to meet loads and life necessary to meet system performance Familiar with Brushless DC motor design Create and modify
drawings with appropriate GD&T, documentation of change and efficacy. Verify Bill of Material. Ensure accuracy of drawings. Design cost effective easily manufacturable hardware taking into account: tolerance stack-ups ease of assembly meet customer installation requirements materials of construction methods of manufacture mechanical environment (Thermal and Vibe) and Application Loading preliminary analytical results (Hand calcs and FEA) mistake proofing Disposition non-conforming hardware and correct production/vendor issues.
Perform failure investigations of designs. Create/Review and Approve processes for assembly, test, and related activities to the development and qualification testing
of a design. Interface with internal and external customers to determine product changes needed for applications as a representative of the company.
Write technical documents for internal and external customers. Participate in design reviews (internal and external) Support new business pursuits that address program technical requirements and associated schedule and costs. Mentor and Guide Junior team members Position entails exposure to typical manufacturing (i. e. Machine Shop, Assembly, Testing, etc. ) environments inclusive of the appropriate eye, hearing and foot protection (as required). Business office environment requiring use of telephone and personal computer Work under pressure and overtime when required, in order to meet deadlines Qualifications/Knowledge/Skills Required: Bachelor's Degree in Mechanical Engineering 8+ years' experience and technical knowledge in mechanical engineering design of hardware preferably in aerospace or defense industry.
Experience designing and testing designs to Mil-Std-810 Environments or similar (Humidity, Salt Fog, Vibration and Shock etc. ) Excellent verbal and written communication skills. Experience solving technical problems using a methodical scientific approach. Experience in 3D modeling of mechanical components and assemblies preferably CREO Experience with Electromechanical Actuation Servo Systems Experience with Brushless DC motor design and or operation Experience with Finite Element Analysis for Structural, Thermal and Dynamic Analysis Possess organizational and task management skills to work concurrent issues in parallel.
Leadership skills to interface with various other teams and disciplines at the company. Knowledge of manufacturing processes such as additive manufacturing, casting, milling, turning, grinding, drilling, etc. Ability to obtain and maintain a security clearance.
Benefits: Health Insurance Sick Time 401k By clicking apply, you are opting in to receiving text/SMS communication with one of our recruiters. All qualified applicants will receive consideration for employment without regard to race, color, religion, interaction, interactionual orientation, gender identity, gender expression, marital status, national origin, age, veteran status, disability, or any other protected class. For more details: jobs-search. org/architecture-construction_wayne-c439518/principal-mechanical-engineer-wayne_i1971113665
The engineer shall work within a multi-disciplined organization and enlist the help of other disciplines when necessary, such as other engineers, manufacturing, purchasing, and quality assurance. Design Electromechanical Actuators from a blank sheet of paper to meet customer requirements.
Design of spur, bevel, worm, and planetary gears Design and analysis of kinematic mechanisms i. e. Slider Crank, Scotch Yoke, 4-Bar Sizing and selection of Ball Screws capable of meeting system performance requirements Sizing and selection of Bearings (Radial, Thrust, Angular contact) to meet loads and life necessary to meet system performance Familiar with Brushless DC motor design Create and modify
drawings with appropriate GD&T, documentation of change and efficacy. Verify Bill of Material. Ensure accuracy of drawings. Design cost effective easily manufacturable hardware taking into account: tolerance stack-ups ease of assembly meet customer installation requirements materials of construction methods of manufacture mechanical environment (Thermal and Vibe) and Application Loading preliminary analytical results (Hand calcs and FEA) mistake proofing Disposition non-conforming hardware and correct production/vendor issues.
Perform failure investigations of designs. Create/Review and Approve processes for assembly, test, and related activities to the development and qualification testing
of a design. Interface with internal and external customers to determine product changes needed for applications as a representative of the company.
Write technical documents for internal and external customers. Participate in design reviews (internal and external) Support new business pursuits that address program technical requirements and associated schedule and costs. Mentor and Guide Junior team members Position entails exposure to typical manufacturing (i. e. Machine Shop, Assembly, Testing, etc. ) environments inclusive of the appropriate eye, hearing and foot protection (as required). Business office environment requiring use of telephone and personal computer Work under pressure and overtime when required, in order to meet deadlines Qualifications/Knowledge/Skills Required: Bachelor's Degree in Mechanical Engineering 8+ years' experience and technical knowledge in mechanical engineering design of hardware preferably in aerospace or defense industry.
Experience designing and testing designs to Mil-Std-810 Environments or similar (Humidity, Salt Fog, Vibration and Shock etc. ) Excellent verbal and written communication skills. Experience solving technical problems using a methodical scientific approach. Experience in 3D modeling of mechanical components and assemblies preferably CREO Experience with Electromechanical Actuation Servo Systems Experience with Brushless DC motor design and or operation Experience with Finite Element Analysis for Structural, Thermal and Dynamic Analysis Possess organizational and task management skills to work concurrent issues in parallel.
Leadership skills to interface with various other teams and disciplines at the company. Knowledge of manufacturing processes such as additive manufacturing, casting, milling, turning, grinding, drilling, etc. Ability to obtain and maintain a security clearance.
Benefits: Health Insurance Sick Time 401k By clicking apply, you are opting in to receiving text/SMS communication with one of our recruiters. All qualified applicants will receive consideration for employment without regard to race, color, religion, interaction, interactionual orientation, gender identity, gender expression, marital status, national origin, age, veteran status, disability, or any other protected class. For more details: jobs-search. org/architecture-construction_wayne-c439518/lead-mechanical-design-engineer-wayne_i1971322752
from saving emissions in the City of Lights to powering the Mars Rover to protecting the F-35 fighter jet. At Electronic Systems, you’ll be among the brightest minds, working on the aerospace and defense industry’s most difficult problems. Drawing strength from our differences, we’re innovating for the future.
And you can, too. Our flexible work environment provides you a chance to change the world without giving up your personal life. We put our customers first – exemplified by our missions: “We Protect Those Who Protect Us” and “We Innovate For Those Who Move The World TM. ” Sound like a team you want to be a part of? An exciting future at BAE Systems awaits and it starts with Year
One— a unique experience to jumpstart your engineering career. We are looking for entry level candidates to join our ES Defense Hardware Engineering Team here at BAE Systems, Inc.
BAE Systems is seeking entry level electrical engineers to fill a variety of electrical engineering positions based on your background, skill set and interest level. Beyond exciting work, each college hire in engineering will be part of our Year One program. In this exciting role, you will enjoy opportunities to take on diverse and challenging work assignments, flexible scheduling with every other Friday off, an inviting and supportive culture, competitive compensation, and an excellent benefits package that
includes tuition reimbursement for advanced degrees. For those candidates in their first year after graduation, BAE’s Year One experience provides recent college graduates with a unique opportunities to jumpstart your engineering career.
As part of the program, you explore different projects and technologies by participating in rotations. You also develop skills by receiving immediate mentorship from experienced managers and engineers, and participate in classes and workshops to expand your knowledge of yourself, technology and our company. Finally, you network and collaborate to make lasting connections with peers, co-workers and leadership. The Role: In this role, you will have opportunities to work and grow in all aspects of FPGA Design or Verification.
• Be mentored by FPGA Subject Matter Experts • FPGA Design Engineers focus on creating VHDL code for FPGA devices then Implement and Synthesize the Design using FPGA tools (e. g. Xilinx Vivado, Intel Quartus, Lattice Diamond) • FPGA Verification Engineers focus on creating System Verilog/UVM code to build a logic simulation test environment. Then using simulation tools (e. g Siemens Questa Modelsim) to evaluate test cases and waveforms. • Bring up the FPGA hardware in the lab using test equipment (oscilloscopes, logic analyzers) and debug tools (e.
g ILA, JTAG) • Use a variety of scripting languages, software languages, MATLAB, timing analysis, to support designs. • Collaborate with Systems and Software Engineers supporting Integration testing of the FPGA as part of a product. Who You Are: • You explored digital design and FPGAs either in coursework, projects, or work experience and are enthusiastic to start your career focusing in that area. • You constantly ask questions and love learning. • You love working together with a team The position requires a U. S. person with the ability to obtain a minimum of a Secret Security Clearance.
Please note: Candidates for these positions will be considered for positions across the greater Nashua, NH area and various engineering hiring teams. Because this role involves a combination of collaborative/in-person and independent work, it will take the form of a hybrid work format , with time split between working onsite and remotely. Required Education, Experience, & Skills Bachelor's or Master’s Degree in Electrical Engineering, Computer Engineering or Computer Science • Eligible to obtain a security clearance • Coursework, projects, or internship focusing on Digital Design, Programming Languages Preferred Education, Experience, & Skills VHDL, Verilog, or System Verilog Programing languages • FPGA Simulation Tools • FPGA Synthesis tools • Object Orient Languages • Hardware testing/Lab experience Pay Information Full-Time Salary Range: $65400 - $111240 Please note: This range is based on our market pay structures.
However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience.
Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave.
Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. About BAE Systems Electronic Systems BAE Systems, Inc. is the U. S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services.
Improving the future and protecting lives is an ambitious mission, but it’s what we do at BAE Systems. Working here means using your passion and ingenuity where it counts – defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team—making a big impact on a global scale. At BAE Systems, you’ll find a rewarding career that truly makes a difference. Electronic Systems (ES) is the global innovator behind BAE Systems’ game-changing defense and commercial electronics.
Exploiting every electron, we push the limits of what is possible, giving our customers the edge and our employees opportunities to change the world. Our products and capabilities can be found everywhere – from the depths of the ocean to the far reaches of space. At our core are more than 14,000 highly talented Electronic Systems employees with the brightest minds in the industry, we make an impact – for our customers and the communities we serve. Our Commitment to Diversity, Equity, and Inclusion: At BAE Systems, we work hard every day to nurture an inclusive culture where employees are valued and feel like they belong.
We are conscious of the need for all employees to see themselves reflected at every level of the company and know that in order to unlock the full potential of our workforce, everyone must feel confident being their best, most sincere self and be equipped to thrive. We provide impactful professional development experiences to our employees and invest in social impact partnerships to uplift communities and drive purposeful change. Here you will find significant opportunities to do meaningful work in an environment intentionally designed to be one where you will learn, grow and belong.
For more details: jobs-search. org/finance_wayne-c439518/job_i1971325276
FAA V&V and T&E. The candidate may lead review and oversight efforts or act on behalf of FAA T&E Stakeholder or Test Standards Board. The position will involve working across all task areas in the ANG-E5A Work Order but will primarily work under Performance Work Statement (PWS) Tasks 6 (T&E Standard Support) & Task 7 (V&V Practices and Conduct Support).
Performs formal system testing activities for a particular project or subset of a larger project under supervision of more experienced personnel. Performs analysis of documented user requirements and directs or assists in the design of test plans in support of user requirements. Participates in all phases of risk management backssment
and system development. Responsible for ensuring that the test design and documentation support all applicable clients, agency or industry standards, timelines and budgets.
Responsible for ensuring test conclusions and recommendations are fully supported by test results. Required skills: Minimum of 10-15 years of relative experience FAA Test and Evaluation experience with a minimum of 2-3 major FAA programs. Current knowledge of FAA Testing Standards Current experience working on test programs at the WJHTC. Good communication skills Good writing skills - will require review and comments of current FAA testing documents against FAA policy. Preferred Experience FAA testing, Federal NOTAM
system Jira for tracking, Selenium (automation) Agile (Standard waterfall is also acceptable) Education Bachelor's Degree in engineering, Business, Finance, Administration, or discipline 5 years of relevant experience may be substituted for the Bachelor's Degree.
Master's Degree or MBA in related field may be substituted for Bachelor's degree and 3 years experience. Ph D in related field may be substituted for Bachelor's degree and 7 years experience LS Technologies, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, interaction, national origin, disability status, genetics, protected veteran status, interactionual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Job Posted by Applicant Pro
hybrid roles that are a blend of onsite and remote work, remote local roles that are primarily home-based but require some level of purpose-driven in-person interaction and living within a commutable distance, and remote non-local roles that can be effectively performed remotely with the ability to work in approved states.
PSEG offers a unique experience to our more than 12,000 employees – we provide the resources and opportunities for career development that come with being a Fortune 500 company, as well as the attention, camaraderie and care for one another you might typically associate with a small business. Our focus on combatting climate change through clean energy technology, our
new net zero climate vision for 2030 and enhanced commitment to diversity, equity and inclusion; and supporting the communities we serve make this a particularly exciting time to join PSEG.
Job Summary The Engineering Services (ES) Engineer (Turbine Engineer) reports to the Turbine Engineering Services Manager to provide technical support for the Power Uprate Project for Salem Units 1 and 2 to achieve project scope, schedule, budget and safety goals consistent with Nuclear and Station goals and regulatory requirements. Job Responsibilities Turbine Engineer will perform the following responsibilities in support of the project portfolio: Provide vendor oversight for all aspects of main
steam turbine upgrades from project initiation to installation backss the required scope of work and exploring various alternative solutions.
Review procurement specifications, modification packages, and factory and field testing for quality. Provide field support during modifications walkdowns, installation and testing. Interface with the project stakeholders including Project Management, Operations, Work Management, Maintenance, Design / Plant Engineering, and Licensing. Interface with system engineers to ensure adequate systems integration including preventive maintenance and surveillance program requirements. Support Operations and Maintenance technical procedural changes Job Specific Qualifications REQUIRED : BS Degree in Mechanical, Civil or Chemical Engineering or related technical degree with 7 years performing related Engineering work in a nuclear or related industry (including experience in specific discipline) Experience in turbine operation and design with a power plant or vendor.
Work effectively with a team to achieve team goals. Support or manage large-scale plant modifications. Independently multi-task and resolve conflicting priorities. Demonstrated Communication and presentation skills. Demonstrated project management skills including Microsoft product usage (Excel, Word, Power Point).
Must meet and maintain Nuclear's requirements for unescorted site access DESIRED : Project Management experience and/or certification Prior power uprate experience System engineering/test engineer experience and/or qualification PWR SRO license or Certification PE License Disclaimer Certain positions at the Company may require you to have access to Part 810-Controlled Information. Under the law, the Company is limited in who it can share this information with and in certain circumstances it is necessary to obtain specific authorization before the Company can share this information.
Accordingly, if the position does require access to this information, you must complete a 10 CFR Part 810 Export Control Compliance Nationality Request Form, a copy of which will be provided to you by Talent Acquisition if an offer is made. If there is a need for specific authorization, due to the time it takes to obtain authorization from the government, we will likely not be able to further proceed with an offer. PSEG is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic.
Legally protected characteristics include race, color, religion, national origin, interaction, age, marital status, interactionual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals. As an employee of PSEG you should be aware that during storm restoration efforts, you may be required to perform functions outside of your routine duties and on a schedule that may be different from normal operations. PSEG’s drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing.
For employees in federally regulated roles (including positions covered by USDOT, PHMSA, or NRC regulations), this also includes random testing. All drug and alcohol testing for federally regulated roles is inclusive of marijuana. Employees who transfer into a federally regulated role are subject to drug and alcohol testing, inclusive of marijuana. PSEG employees must apply for jobs internally through em Power which can be accessed through sharepoint. by clicking on the em Power icon, then selecting careers. This site ( jobs.
/ ) is strictly for candidates who are not currently PSEG employees, with the exception of PSEG employees who do not have company email addresses. PSEG is committed to providing reasonable accommodations to individuals with disabilities. If you have a disability and need assistance applying for a position, please call 973-430-xyz X or email xyz X@. If you need to request a reasonable accommodation to perform the essential functions of the job, email xyz X@. Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision.
ADDITIONAL EEO/AA INFORMATION (Click link below) Know your Rights: Workplace Discrimination is Illegal Pay Transparency Nondiscrimination Provision
hybrid roles that are a blend of onsite and remote work, remote local roles that are primarily home-based but require some level of purpose-driven in-person interaction and living within a commutable distance, and remote non-local roles that can be effectively performed remotely with the ability to work in approved states.
PSEG offers a unique experience to our more than 12,000 employees – we provide the resources and opportunities for career development that come with being a Fortune 500 company, as well as the attention, camaraderie and care for one another you might typically associate with a small business. Our focus on combatting climate change through clean energy technology, our
new net zero climate vision for 2030 and enhanced commitment to diversity, equity and inclusion; and supporting the communities we serve make this a particularly exciting time to join PSEG.
Job Summary The Engineering Services (ES) Engineer (Turbine Engineer) reports to the Turbine Engineering Services Manager to provide technical support for the Power Uprate Project for Salem Units 1 and 2 to achieve project scope, schedule, budget and safety goals consistent with Nuclear and Station goals and regulatory requirements. Job Responsibilities Turbine Engineer will perform the following responsibilities in support of the project portfolio: Provide vendor oversight for all aspects of main
steam turbine upgrades from project initiation to installation backss the required scope of work and exploring various alternative solutions.
Review procurement specifications, modification packages, and factory and field testing for quality. Provide field support during modifications walkdowns, installation and testing. Interface with the project stakeholders including Project Management, Operations, Work Management, Maintenance, Design / Plant Engineering, and Licensing. Interface with system engineers to ensure adequate systems integration including preventive maintenance and surveillance program requirements. Support Operations and Maintenance technical procedural changes.
Job Specific Qualifications REQUIRED : BS Degree in Mechanical, Civil or Chemical Engineering or related technical degree with 10 years performing related Engineering work in a nuclear or related industry (including experience in specific discipline) Experience in turbine operation and design with a power plant or vendor. Work effectively with a team to achieve team goals. Support or manage large-scale plant modifications. Independently multi-task and resolve conflicting priorities. Demonstrated Communication and presentation skills. Demonstrated project management skills including Microsoft product usage (Excel, Word, Power Point).
Must meet and maintain Nuclear's requirements for unescorted site access. DESIRED : Project Management experience and/or certification Prior power uprate experience System engineering/test engineer experience and/or qualification PWR SRO license or Certification PE license Disclaimer Certain positions at the Company may require you to have access to Part 810-Controlled Information. Under the law, the Company is limited in who it can share this information with and in certain circumstances it is necessary to obtain specific authorization before the Company can share this information.
Accordingly, if the position does require access to this information, you must complete a 10 CFR Part 810 Export Control Compliance Nationality Request Form, a copy of which will be provided to you by Talent Acquisition if an offer is made. If there is a need for specific authorization, due to the time it takes to obtain authorization from the government, we will likely not be able to further proceed with an offer. PSEG is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic.
Legally protected characteristics include race, color, religion, national origin, interaction, age, marital status, interactionual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals. As an employee of PSEG you should be aware that during storm restoration efforts, you may be required to perform functions outside of your routine duties and on a schedule that may be different from normal operations. PSEG’s drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing.
For employees in federally regulated roles (including positions covered by USDOT, PHMSA, or NRC regulations), this also includes random testing. All drug and alcohol testing for federally regulated roles is inclusive of marijuana. Employees who transfer into a federally regulated role are subject to drug and alcohol testing, inclusive of marijuana. PSEG employees must apply for jobs internally through em Power which can be accessed through sharepoint. by clicking on the em Power icon, then selecting careers. This site ( jobs.
/ ) is strictly for candidates who are not currently PSEG employees, with the exception of PSEG employees who do not have company email addresses. PSEG is committed to providing reasonable accommodations to individuals with disabilities. If you have a disability and need assistance applying for a position, please call 973-430-xyz X or email xyz X@. If you need to request a reasonable accommodation to perform the essential functions of the job, email xyz X@. Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision.
ADDITIONAL EEO/AA INFORMATION (Click link below) Know your Rights: Workplace Discrimination is Illegal Pay Transparency Nondiscrimination Provision
hybrid roles that are a blend of onsite and remote work, remote local roles that are primarily home-based but require some level of purpose-driven in-person interaction and living within a commutable distance, and remote non-local roles that can be effectively performed remotely with the ability to work in approved states.
PSEG offers a unique experience to our more than 12,000 employees – we provide the resources and opportunities for career development that come with being a Fortune 500 company, as well as the attention, camaraderie and care for one another you might typically associate with a small business. Our focus on combatting climate change through clean energy technology, our
new net zero climate vision for 2030 and enhanced commitment to diversity, equity and inclusion; and supporting the communities we serve make this a particularly exciting time to join PSEG.
Job Summary The Engineering Services (ES) Engineer (Turbine Engineer) reports to the Turbine Engineering Services Manager to provide technical support for the Power Uprate Project for Salem Units 1 and 2 to achieve project scope, schedule, budget and safety goals consistent with Nuclear and Station goals and regulatory requirements. Job Responsibilities Turbine Engineer will perform the following responsibilities in support of the project portfolio: Provide vendor oversight for all aspects of main
steam turbine upgrades from project initiation to installation backss the required scope of work and exploring various alternative solutions.
Review procurement specifications, modification packages, and factory and field testing for quality. Provide field support during modifications walkdowns, installation and testing. Interface with the project stakeholders including Project Management, Operations, Work Management, Maintenance, Design / Plant Engineering, and Licensing. Interface with system engineers to ensure adequate systems integration including preventive maintenance and surveillance program requirements. Support Operations and Maintenance technical procedural changes.
Job Specific Qualifications REQUIRED : BS Degree in Mechanical, Civil or Chemical Engineering or related technical degree with 13 years performing related Engineering work in a nuclear or related industry (including experience in specific discipline) Experience in turbine operation and design with a power plant or vendor. Work effectively with a team to achieve team goals. Support or manage large-scale plant modifications. Independently multi-task and resolve conflicting priorities. Demonstrated Communication and presentation skills. Demonstrated project management skills including Microsoft product usage (Excel, Word, Power Point).
Must meet and maintain Nuclear's requirements for unescorted site access. DESIRED : Project Management experience and/or certification Prior power uprate experience System engineering/test engineer experience and/or qualification PWR SRO license or Certification PE license Disclaimer Certain positions at the Company may require you to have access to Part 810-Controlled Information. Under the law, the Company is limited in who it can share this information with and in certain circumstances it is necessary to obtain specific authorization before the Company can share this information.
Accordingly, if the position does require access to this information, you must complete a 10 CFR Part 810 Export Control Compliance Nationality Request Form, a copy of which will be provided to you by Talent Acquisition if an offer is made. If there is a need for specific authorization, due to the time it takes to obtain authorization from the government, we will likely not be able to further proceed with an offer. PSEG is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic.
Legally protected characteristics include race, color, religion, national origin, interaction, age, marital status, interactionual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals. As an employee of PSEG you should be aware that during storm restoration efforts, you may be required to perform functions outside of your routine duties and on a schedule that may be different from normal operations. PSEG’s drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing.
For employees in federally regulated roles (including positions covered by USDOT, PHMSA, or NRC regulations), this also includes random testing. All drug and alcohol testing for federally regulated roles is inclusive of marijuana. Employees who transfer into a federally regulated role are subject to drug and alcohol testing, inclusive of marijuana. PSEG employees must apply for jobs internally through em Power which can be accessed through sharepoint. by clicking on the em Power icon, then selecting careers. This site ( PSEG Careers and Job Openings ) is strictly for candidates who are not currently PSEG employees, with the exception of PSEG employees who do not have company email addresses.
PSEG is committed to providing reasonable accommodations to individuals with disabilities. If you have a disability and need assistance applying for a position, please call 973-430-xyz X or email xyz X@. If you need to request a reasonable accommodation to perform the essential functions of the job, email xyz X@. Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision.
ADDITIONAL EEO/AA INFORMATION (Click link below) Know your Rights: Workplace Discrimination is Illegal Pay Transparency Nondiscrimination Provision
hybrid roles that are a blend of onsite and remote work, remote local roles that are primarily home-based but require some level of purpose-driven in-person interaction and living within a commutable distance, and remote non-local roles that can be effectively performed remotely with the ability to work in approved states.
PSEG offers a unique experience to our more than 12,000 employees – we provide the resources and opportunities for career development that come with being a Fortune 500 company, as well as the attention, camaraderie and care for one another you might typically associate with a small business. Our focus on combatting climate change through clean energy technology, our
new net zero climate vision for 2030 and enhanced commitment to diversity, equity and inclusion; and supporting the communities we serve make this a particularly exciting time to join PSEG.
Job Summary The Operations Liaison reports to the Engineering Services (ES) Manager to provide operations support for the Power Uprate Project for Salem Units 1 and 2 to achieve project scope, schedule, budget and safety goals consistent with Nuclear and Station goals and regulatory requirements. Job Responsibilities Evaluate proposed plant operational changes and advise on operational risk for proposed project scope. Develop and revise operational procedures. Oversee modification testing development
and implementation. Interface with vendors, Licensing and NRC regarding operational issues, findings, open items and requests.
Interface with Operations Department subject matter experts and stakeholders to identify and resolve potential operational risk to support safe, efficient, cost effective operation of the Salem Units. Review design and proposed license changes for compliance with Technical Specifications and procedure impact. Perform 10CFR50.59 applicability reviews and Station Qualified Reviewer (SQR) reviews. Support implementation outages. Job Specific Qualifications Required: Bachelor's Degree in Engineering, Technical area or equivalent education/experience 13 years of experience.
Prior or current SRO license at Westinghouse PWR technology, preferably at Salem Station. 5 years prior PWR experience Must meet the Nuclear Business Unit requirements for unescorted site access. Qualified (or capable of becoming qualified) as a SQR Reviewer and a 10CFR50.59 Evaluation preparer/reviewer. Preferred: Prior experiences in large plant projects and/or Power Uprates. Disclaimer Certain positions at the Company may require you to have access to Part 810-Controlled Information. Under the law, the Company is limited in who it can share this information with and in certain circumstances it is necessary to obtain specific authorization before the Company can share this information.
Accordingly, if the position does require access to this information, you must complete a 10 CFR Part 810 Export Control Compliance Nationality Request Form, a copy of which will be provided to you by Talent Acquisition if an offer is made. If there is a need for specific authorization, due to the time it takes to obtain authorization from the government, we will likely not be able to further proceed with an offer. PSEG is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic.
Legally protected characteristics include race, color, religion, national origin, interaction, age, marital status, interactionual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals. As an employee of PSEG you should be aware that during storm restoration efforts, you may be required to perform functions outside of your routine duties and on a schedule that may be different from normal operations.
PSEG’s drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing. For employees in federally regulated roles (including positions covered by USDOT, PHMSA, or NRC regulations), this also includes random testing. All drug and alcohol testing for federally regulated roles is inclusive of marijuana. Employees who transfer into a federally regulated role are subject to drug and alcohol testing, inclusive of marijuana. PSEG employees must apply for jobs internally through em Power which can be accessed through sharepoint.
by clicking on the em Power icon, then selecting careers. This site ( PSEG Careers and Job Openings ) is strictly for candidates who are not currently PSEG employees, with the exception of PSEG employees who do not have company email addresses. PSEG is committed to providing reasonable accommodations to individuals with disabilities. If you have a disability and need assistance applying for a position, please call 973-430-xyz X or email xyz X@. If you need to request a reasonable accommodation to perform the essential functions of the job, email xyz X@. Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision.
ADDITIONAL EEO/AA INFORMATION (Click link below) Know your Rights: Workplace Discrimination is Illegal Pay Transparency Nondiscrimination Provision
hybrid roles that are a blend of onsite and remote work, remote local roles that are primarily home-based but require some level of purpose-driven in-person interaction and living within a commutable distance, and remote non-local roles that can be effectively performed remotely with the ability to work in approved states.
PSEG offers a unique experience to our more than 12,000 employees – we provide the resources and opportunities for career development that come with being a Fortune 500 company, as well as the attention, camaraderie and care for one another you might typically associate with a small business. Our focus on combatting climate change through clean energy technology, our
new net zero climate vision for 2030 and enhanced commitment to diversity, equity and inclusion; and supporting the communities we serve make this a particularly exciting time to join PSEG.
Job Summary The Engineering Services (ES) Manager Plant/Design is responsible to the Engineering Services Director for providing supervisory oversight on the governance and oversight of design and plant engineering functions establishing and reinforcing standards and expectations for the safe, reliable, and efficient implementation of the plant design basis and equipment reliability consistent with Nuclear and Station goals. Engineering Manager core responsibilities for the Power Uprate Project : Ensure
qualified engineers are assigned to the project and maintain high quality technical human performance Monitor budget and schedule, approval of requisitions and milestone payments to suppliers Interface with the plant leadership peers to ensure continuous engagement by the plant stakeholders Provide oversight for various vendors and equipment OEMs.
Ensure compliance with regulatory requirements for 50.59, License Amendment Request preparation and any required supporting analysis. Provide oversight and approval for procurement specifications, design analyses, design basis calculations, system modifications, commissioning, closeout activates Job Responsibilities Balance Of Plant (BOP) Manager : Thermal performance of the secondary side of the plant, challenges with increase FW flow Feedwater heaters modification/replacements Booster pump and hotwell pump capacity Setpoint changes review related to transient conditions (runback, load reduction, loss of heater drain pumps) Condenser dump capacity review, TGV DP, MSSVs, FW pumps upgrade Feed Reg Valves backssment, modifications or replacement for increase Cv and/or for the exiting vibration issues Higher turbine exhaust flow and impact on Condenser Condensers Replace FW crossflow with DVR Job Specific Qualifications Bachelor's degree in engineering or Physics Must have 10-15 years of engineering experience within a Commercial or Nuclear Power Plant industry Work effectively with a team to achieve team goals Support or manage large scale plant modifications Independently multi-task and resolve conflicting priorities Demonstrated Communication and presentation skills Demonstrated project management skills including Microsoft product usage (Excel, Word, Power Point).
Must meet and maintain Nuclear's requirements for unescorted site access DESIRED: Project Management experience and/or certification Design Engineering - configuration control qualification System engineering/test engineer experience and/or qualification Experience in PWR NSSS design and operational safety analysis and limitations Disclaimer Certain positions at the Company may require you to have access to Part 810-Controlled Information.
Under the law, the Company is limited in who it can share this information with and in certain circumstances it is necessary to obtain specific authorization before the Company can share this information. Accordingly, if the position does require access to this information, you must complete a 10 CFR Part 810 Export Control Compliance Nationality Request Form, a copy of which will be provided to you by Talent Acquisition if an offer is made.
If there is a need for specific authorization, due to the time it takes to obtain authorization from the government, we will likely not be able to further proceed with an offer. PSEG is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic. Legally protected characteristics include race, color, religion, national origin, interaction, age, marital status, interactionual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals.
As an employee of PSEG you should be aware that during storm restoration efforts, you may be required to perform functions outside of your routine duties and on a schedule that may be different from normal operations. PSEG’s drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing. For employees in federally regulated roles (including positions covered by USDOT, PHMSA, or NRC regulations), this also includes random testing.
All drug and alcohol testing for federally regulated roles is inclusive of marijuana. Employees who transfer into a federally regulated role are subject to drug and alcohol testing, inclusive of marijuana. PSEG employees must apply for jobs internally through em Power which can be accessed through sharepoint. by clicking on the em Power icon, then selecting careers. This site ( jobs. / ) is strictly for candidates who are not currently PSEG employees, with the exception of PSEG employees who do not have company email addresses.
PSEG is committed to providing reasonable accommodations to individuals with disabilities. If you have a disability and need assistance applying for a position, please call 973-430-xyz X or email xyz X@. If you need to request a reasonable accommodation to perform the essential functions of the job, email xyz X@. Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision. ADDITIONAL EEO/AA INFORMATION (Click link below) Know your Rights: Workplace Discrimination is Illegal Pay Transparency Nondiscrimination Provision