Location: Eastlake, OH
Company: Firstenergy Group
combustion turbines, fuel ceils, generators, and their auxiliary and associated equipment. Under general directive supervision, once qualified, performs the duties listed: Assists employees of same or higher classification in performing operational functions.
Carries out instructions of the Plant Supervisor or Synchronous Condenser Specialist (SCS). Performs work or assists SCS(s) to assure efficient, dependable operating conditions of synchronous condensers, combustion turbines, fuel cells, generators, and their auxiliary and associated equipment. Operates and maintains Plant Equipment Associated with the operation of the facility. National Pollution Discharge Elimination Systems (NPDES)
Equipment. Checks with other SCSB(s) and SCS(s) being relieved, for special orders and operating conditions; performs an initial check of operations and conditions of equipment when commencing duties.
Records meter and instrument indications; logs all equipment trouble, and equipment operating problems and records times for starting and stopping various equipment, etc. as well as reports any and all abnormalities to Plant Supervisor and I or SCS. Maintains water and air discharges within regulatory compliance. Participates in removing and tagging of equipment from service for inspection and maintenance work; removes tags from equipment and clears upon completion of work; ensures that
equipment and operating conditions are returned to normal.
In accordance with the switching authority's orders or established procedures and Company practices, performs various switching operations, which are necessary to complete assigned construction and / or maintenance activities, reports to switching authority any unusual or abnormal conditions. Performs sampling, testing, analyzing and adding proper treatment to NPDES and plant discharge water using prescribed operating procedures and practices to maintain regulatory compliance. Performs duties such as operating primary electrical switchgear, switch houses, transmission yards and recording routine and special readings.
Inspects or checks all circuit loads, and voltages, counter readings, equipment temperatures and ground detectors and using portable instruments such as meggers, digital multimeters, voltmeters, var meters, watt meters, and tong testers when required. Maintains correct voltages on batteries, takes and records temperature and gravity reading and maintains battery cells when necessary. Performs minor mechanical and electrical repair and preventative work on plant equipment such as: synchronous condensers, combustion turbines, fuel cells, generators, and their auxiliary and associated equipment, non-code welding, sheet metal work, and pipe fitting Performs maintenance and repair of plant equipment such as: replacing worn brushes on rotating equipment, blowing out switchboards and other electrical equipment, cleaning switchboards, meters, potheads, and other electrical equipment.
Assists SCS's in inspecting, repairing and overhauling electrical equipment. Performs, directs, or assists in the performance of any task assigned for continuity or restoration of service in an emergency. Makes repairs or assists in the installation of lighting circuits, busses, plant wiring including auxiliary supply; the installation, repair and / or replacing of instrument control and signal wiring Sets up and removes rigging, tackle, blocking, shoring and scaffolds and operates overhead and mobile cranes in non-critical lifts.
Operates and maintains basic and electrical hand tools and extension cords. Follows orders, procedures, and practices; safe-guards employees and others at work; inspects, maintains, and operates company fire-fighting apparatus; administers first aid; maintains a high standard of housekeeping Participates in incipient fire fighting. Cleans and paints equipment and structures.
Performs other work, as assigned. Qualifications and Requirements Must possess a two-year technical or applied science degree, applicable to the work, from an accredited college or university In lieu of the degree, three years related experience in a power producing utility or other process-related industry, including, but not limited to: paper mill industry, airline industry, chemical and petro-chemical industries, equivalent military experience, applicable to the work discipline, from any branch of the United States Armed Services Must be able to pass the Edison Electric Institute POSS/MASS test Ability to pass respirator fit test Must possess and maintain valid driver's license(s) required to do work.
Must be able to work in high places and in restricted or confined spaces Must be able to perform a variety of operations and have an understanding of operational problems. Must have the ability to receive and pass on orders and instructions, to those employees assisting in such a manner as to maintain harmony safety and cooperation. Ability and willingness to work shifts and overtime. Must be able to acquire basic knowledge of the mechanical, electrical and operational systems for the plant.
Must have a working knowledge of applied electricity covering AC/DC circuits. Must have a working knowledge of common safety practices and rules, regulations and procedures, and demonstrated proficiency of the same. Must be willing to receive instructions, communicate effectively, and cooperate with fellow employees at all times in the performance of work. Must be willing to acquire additional knowledge and skills required for performance of the duties of this position through attendance at specialized training classes and other means.
Must be able to train and direct others and receive and issue orders in a manner that will maintain harmony and safety. Must be able to satisfactorily complete training courses as required by career path requirements and complete all TPE's required for SCS B. Must possess effective oral and written communication skills to organize and present ideas, reports, and analyses accurately and effectively Benefits, Compensation & Workforce Diversity At First Energy, employees are key to our success. We depend on their talents to meet the challenges of our changing business environment. We are committed to rewarding individual and team efforts through our total rewards philosophy which includes competitive pay plus incentive compensation, a company-sponsored pension plan, 401(k) savings plan with matching employer contribution, a choice of medical, prescription drug, dental, vision, and life insurance programs, as well as skills development training with tuition reimbursement.
Please visit our website at to learn more about all of our employee rewards programs. First Energy proudly supports workforce diversity. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, interaction, interactionual orientation, gender identity, age, status as a protected veteran, or status as a qualified individual with a disability.
No recruiters or agencies without a previously signed contract. Unable to sponsor or transfer H-1B visas at this time. Safety Safety is a core value for First Energy and is essential to all of our business activities. We ensure employees have the tools, information, and processes to perform their duties in a manner that assures safety for themselves, their co-workers, our customers and the public.
Our goals are to provide a safe work environment, to maintain an accident-free, injury-free workplace, and to promote and maintain public safety. To meet these goals, we dedicate ourselves to achieving world-class safety standards. First Energy Human Resources Team
is an investment casting foundry that specializes in complex aerospace & gas turbine components. With a stable business model and competitive compensation & benefits, CPP is a great option to consider as you look to make your next career move. For more information, please visit / WHAT WE OFFER Weekly Pay for Hourly Employees Comprehensive Benefit Plans Quarterly Bonus Opportunity 401k with Company Match Emphasis on Employee Engagement Paid Holidays and Vacation Time Tuition Reimbursement Opportunities for Advancement JOB SUMMARY Work cooperatively in a team environment to develop and enhance robust manufacturing processes and tooling to support the company's growth in the aerospace and
industrial investment casting markets.
Develop the overall metallurgical DS/SX casting process from gate design to establishing shelling parameters. Develop, maintain, and teach " best practice" investment casting procedures and practices to ensure CPP business objectives are satisfied.
Identify problems, generate alternatives, and implement solutions to problems that affect yield, rework and overall quality of the product using a standardized approach. Take a leadership role occasionally in resolving cross-functional problems. PRIMARY RESPONSIBILITIES Support the construction of dies (shrink factor analysis), gages and support tooling needed to produce and inspect
ceramic cores, wax patterns, and castings. Identify and improve process yields using various data analysis techniques (statistical, mathematical, DOE, 6 Sigma, etc.
) to uncover variables in the process. Interface with tooling vendors and CPP Purchasing to produce a quality tool/die at a competitive price. Control the dimensional quality of castings to meet or exceed customer expectations. Develop internal job instructions. Identify, evaluate, and implement new process technologies that will improve manufacturing and product capabilities. Document work procedures and processes. Work closely with other departments to ensure organizational objectives are met.
Publish reports on research and completed tests using data-based decisions. Routinely audit production lots for adherence to established techniques and to ensure the repeatability of the results. Work closely with other departments to ensure organization objectives are achieved. Maintain a positive work atmosphere by behaving and communicating in a professional manner. Improve labor utilization and reduce cost. Communicate with tooling suppliers, core suppliers, and customers to meet product needs. QUALIFICATIONS Education : BS in Engineering or related technical field Experience : 5-7 years' experience in mechanical or product engineering in the investment casting industry.
Increasing levels of responsibility. Certifications/Licenses : None Other Required Knowledge, Skills & Abilities : Knowledge of DS/SX (Directionally Solidified / Single Crystal) casting process, shell parameters and dimensional impact. Knowledge of statistics. Knowledge of Six Sigma and Lean Manufacturing principles. Strong working knowledge of GD&T. Ability to interpret customer specifications relative to establishing internal written NDT specifications. Excellent analytical skills. Excellent communication skills.
Strong PC skills. Strong program management skills. CAD Skills. Excellent organizational, interpersonal and documentation skills. Ability to interpret customer drawings and models. Good written communication skills. Professionalism. Innovative thinking. Team orientation. Assertive. Energetic. Self-starter. Risk taker. Sense of urgency. WORK ENVIRONMENT Office Environment. Occasional work required on weekends. Physical Demands : Sitting/Standing for extended periods of time, able to lift up to 20lbs, extended periods of time using a computer screen. Required PPE : Check for required PPE in areas you may be working.
Safety Glasses: Needed in all areas of the plant. Steel Toed Shoes : Needed in all areas of the plant. NOTE: Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, interaction, interactionual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law. It is the policy of the company to comply with all aspects of the Americans with Disabilities Act.
Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U. S. persons (U. S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status prior to employment. Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen. This is a non-management position This is a full time position
to produce quality quartz products in a safe and cost-effective environment. Tasks and responsibilities of the position: Provide leadership, engineering expertise, and excellence to the Operations and Maintenance teams in support of Safety, Quality, Productivity and Product Delivery.
Lead identification, mitigation, and elimination of safety exposures. Ensure EHS compliance and improvement. Establish, update, and maintain production procedures, maintenance procedures, process/product control, and test data. Assist in the development of new products and processes. Drive continuous improvement in areas of safety, product quality, product delivery, and product cost through the analysis of
plant data and collaboration with Operations and Maintenance personnel and collaboration with internal and external resources. Reduce product lead time via the implementation of Lean Manufacturing concepts on the production line.
Audit plant activities to ensure compliance while maintaining appropriate documentation. Interact with vendors for project implementation and proposals. Lead and assist in the development and sustainability of 5S. Facilitate problem solving (root cause analysis) with corrective action through collaboration with Operations, Maintenance, and other support organizations. Collect and analyze process and production data to identify trends and ensure process stability.
Ensure quality through analysis of incoming raw materials, process reliability, in-process testing, and final product certification.
Partner with the organization to drive business success through process and equipment reliability and teamwork. Drive variable cost productivity through process improvements Development of trial plans and monitoring/execution of trial steps Key Metrics Role is Accountable For: Material and conversion variance OEE% Cost analysis VCP (Variable Cost and Productivity) or Lean savings Key Relationships: Plant Leadership Team and Shop Floor Employees Site EH&S Leader Functional Leaders including Quality, Technology, Continuous Improvement and Commercial Organization Travel Requirements Up to 10% Basic Qualifications: Bachelor’s degree in Mechanical, Chemical, Industrial or Electrical Engineering Minimum of 3 years of experience in Process Engineering in a manufacturing environment Demonstrated Capital Project Management Skills including engagement and management of internal and external resources Excellent written and oral communication skills Demonstrated team contribution and leadership skills A track record of leading Continuous Improvement efforts with demonstrated sustained outcomes.
Strong analytical expertise coupled with excellent verbal, written, and presentation skills to all levels.
Preferred Qualifications: Prior experience in a Process Engineering role Demonstrated mechanical engineering aptitude Prior experience mentoring and coaching others with demonstrated change management skills Exhibits desire and courage to learn new skills and assume broader roles in the organization Energetic self-starter with strong leadership skills Exhibits a sense of urgency which translates to the floor Deliver on commitments: proven track record of sustainable performance Proficient in SAP and/or equivalent ERP Preferred Green Belt Level or Lean/Six Sigma skills Proficient in: Project Management and Leadership Root Cause Analysis Statistical Analysis and Interpretation Designed Experiments a plus We are an Equal Opportunity Employer We treat all our associates and candidates as equals.
We require all associates and managers to do so too and comply with employment laws and regulations. All personnel actions are conducted in the spirit of equal employment. We are committed to recruit, train, promote and retain associates without regard to race, color, religion, gender, gender identification and expression, national origin, marital status, age, disability, genetic information, military status, interactionual orientation or any other characteristic protected by applicable local, state or federal laws.
PI1f9a9282c7b For more details: jobs-search. org/process-engineer_willoughby-c443377/process-engineer-willoughby_i1970373755
Text us at (440) 571-xyz X. Stop into 7959 Reynolds Road M-F between 9 AM and 3:30 PM. Download the Express Jobs app from Google Play or the Apple Store Position Overview: The Cutting Tool Design Engineer designs the best cutting tools per customer''s requirements, as well as manufacturability.
You will be using Solid Edge to make models and drawings for production. Duties & Responsibilities: Design and create 3D models and 2D drawings of cutting tools Update and maintain drawings, files, and records Determine raw materials specifications for manufacturing Wrk with Sales team to troubleshoot issues, and offer solutions to the customer Work with Production team to make design adjustments
to prevent rejects during manufacturing Basic Qualifications: Proficiency in Solid Edge CAD software Understanding of machining operations Understanding of cutting tool design Preferred Qualifications: Understanding of cutting tool manufacturing Understanding of jigs and fixtures design Experience in operating CNC machines Proficiency in Solid Works or similar Proficiency in Auto CAD or similar Qualities: Preference for simplicity and efficiency Likes to get things done ASAP Welcomes change, Adaptable Works well under pressure Hands on Team Player Respectful Company Benefits: Medical, Dental, Vision 401k PTO Training provided to the right type of candidate One interview will connect you to over
200 companies in the Lake County area when you work with Express.
Our exclusive matching system helps you get the shift, location, and position you are most qualified for at the pay y Pando Logic. Keywords: Tooling Engineer, Location: Perry, OH - 44081 , PL: 587478899For more details: jobs-search. org/manufacturing_perry-c442991/job_i1970455447
includes one of the nation's largest investor-owned electric systems, more than 24,000 miles of transmission lines that connect the Midwest and Mid-Atlantic regions, and a regulated generating fleet with a total capacity of more than 3,500 megawatts. About the Opportunity This is an open position with First Energy Service Co.
a subsidiary of First Energy Corp. [FEU]The Supervisor, Transmission Engineering Design is responsible for supervising a team of engineers, designers, and drafters. This position requires an understanding of projects relating to the design, construction and maintenance of transmission facilities. The ideal candidate will possess working knowledge of PLS-CADD as well
as an understanding of transmission design and analyses, wire sag and clearance calculations, NESC and OSHA clearance requirements, development of design packages, creation of bills-of-material for transmission line projects, and creation of standards.
Additional experience with the Power Line Systems design suite and foundation design is a plus. Responsibilities include: Developing and maintaining a safe environment for the transmission line network to ensure the safety of FE employees, contractors, and the public. Reviewing engineering designs and standards. Supporting work crews during construction including office work and field visits. Must be able to coordinate designs across
First Energy (Operating Companies, Siting and Permitting, Project Development, Project Management, Maintenance, Forestry, Real Estate, Environmental, Substations and Construction).
Working with various industry and regulatory groups as required to learn and advocate industry best practices (e. g. EPRI, EEI, NATF, etc. ). Appearing on behalf of First Energy at local public zoning hearings and planning committee meetings, and state utility commission hearings as a subject matter expert. Providing engineering support and mentorship to employees to assist in their learning. Managing transmission line encroachments to ensure NESC clearance requirements are met.
Coordinating encroachment responses with Right-of-Way Services and Transmission Line Maintenance personnel and ensure that public safety is protected. Providing assistance during emergencies and storm related activities. Preparing and/or reviewing engineering design calculations, reports, specifications and construction documents, and other technical documents as needed, in coordination with staff and project team members. Researching and exploring new technologies to enhance processes, increasing efficiencies, while decreasing the risk of human error. Manage project workload and Issue for Construction due dates.
Qualifications include: A Bachelor of Science degree in Civil, Electrical, or Mechanical Engineering (BSCE, BSEE, BSME) from an ABET accredited institution is required. Acceptable alternatives are: (1) a Professional Engineer's (PE) License (2) a Bachelor's degree in Electrical, Civil or Mechanical Engineering or technical field of study (non-ABET) plus an advanced degree in Electrical, Civil or Mechanical Engineering from a university with an ABET accredited Bachelor's program is required. Minimum of 8 years of engineering experience is required. A Professional Engineering (PE) Certificate is preferred.
Capable of communicating, motivating, and driving positive change and improvement. Must demonstrate effective analytical and reasoning capabilities and writing skills, including ability to effectively structure and confidently present information to peers, industry work groups, regulatory bodies, and leadership of First Energy. Must be able to handle a variety of complex issues and assignments. Must adhere to First Energy's Code of Conduct and industry compliance obligations. Must demonstrate a questioning attitude to continue to learn, produce results, and strengthen existing relationships.
Related experience includes engineering, engineering standards, budget practices, field practices, equipment specifications, and maintenance practices. Must possess strong organizational, computer, planning, budgeting, and problem-solving skills. Must be self-directed and independent. Must embrace a safety culture and maintain a safe work environment for co-workers and the public. Must be able to manage many projects simultaneously and be able to work effectively under the pressure of deadlines, unexpected developments, changes in project scope, budget constraints, unforeseen field questions, and demands on time for work assignments outside of the normal duties.
Must have strong interpersonal skills as well as the ability to develop and maintain relationships across FE and with outside firms. Ability to coach and develop employees. Benefits, Compensation & Workforce Diversity At First Energy, employees are key to our success. We depend on their talents to meet the challenges of our changing business environment. We are committed to rewarding individual and team efforts through our total rewards philosophy which includes competitive pay plus incentive compensation, a company-sponsored pension plan, 401(k) savings plan with matching employer contribution, a choice of medical, prescription drug, dental, vision, and life insurance programs, as well as skills development training with tuition reimbursement.
Please visit our website at to learn more about all of our employee rewards programs. First Energy proudly supports workforce diversity. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, interaction, interactionual orientation, gender identity, age, status as a protected veteran, or status as a qualified individual with a disability.
No recruiters or agencies without a previously signed contract. Unable to sponsor or transfer H-1B visas at this time. Safety Safety is a core value for First Energy and is essential to all of our business activities. We ensure employees have the tools, information, and processes to perform their duties in a manner that assures safety for themselves, their co-workers, our customers and the public. Our goals are to provide a safe work environment, to maintain an accident-free, injury-free workplace, and to promote and maintain public safety.
To meet these goals, we dedicate ourselves to achieving world-class safety standards.
includes one of the nation's largest investor-owned electric systems, more than 24,000 miles of transmission lines that connect the Midwest and Mid-Atlantic regions, and a regulated generating fleet with a total capacity of more than 3,500 megawatts. About the Opportunity This is an open position with Ohio Edison Co.
a subsidiary of First Energy Corp. [FEU]Location: Springfield, OHResponsibilities Under general directive supervision, performs duties in connection with the location and isolation of faults and the restoration and maintenance of service on transmission and distribution lines; carries through assignments, at times with the assistance of other employees; performs duties such
as: Locating and repairing faults on lines and equipment; Performing various operations such as paralleling circuits to restore service, isolating underground cables, switching transmission and distribution circuits; Reporting at fires or scenes of accidents involving the Company; clearing wires; cutting off electric services when necessary; isolating sections of line; cooperating with public authorities in applying resuscitation and in other emergencies; Making emergency repairs or determining the extent of necessary repairs; requesting the services of a line crew for major repairs; Perform rubber gloving work on equipment up to 23,000 volts with one additional qualified person.
Performing switching and tagging operations in unattended substations, as directed; Replacing customer's fuses; Receiving customer telephone calls, as required; handling appropriate trouble calls and referring others to the proper employee; Handling meter turn-ons and turn-offs, connecting, disconnecting, installing and removing services; collecting money, as required; Patrolling lines; checking voltages; handling voltage complaints; Performing, when assigned, street light patrolling duties such as: patrolling street lights as assigned; replacing burned out bulbs and glassware; locating and repairing faults on street lighting circuits, which may be energized; locating and repairing faults on distribution lines which are the cause of trouble on street lighting circuits; and assisting other line serviceman in their duties Making trouble and interruption reports or reports of service calls, as required; preparing the necessary clerical work; Maintaining truck stock at prescribed levels; Directing and training employees assigned to the work; Performing the duties of Lineman-A; and Performing other work, as assigned.
Qualifications Must meet the Company's requirements as to General Qualifications; must have all the qualifications of Lineman-A and, in addition: Must have at least one year's experience as Lineman-A, or the equivalent; Must have demonstrated aptitude for and ability in the performance of the duties of Lineman-A; Must have a thorough practical knowledge of the principles and operation of the Company's electric distribution, street lighting and transmission systems in the area to which assigned, including protective devices and rubber gloving practices.
Must be thoroughly familiar with the location of roads, line circuits, substations and large power customers in the area to which assigned; Must be thoroughly familiar with the procedures and rules for ordering out and tagging of circuits and the Company's identification system for circuits; Must be able to diagnose trouble and solve the problem encountered; Must be able to make clear, concise, and accurate reports and properly receive and quickly and correctly interpret orders; Must have the necessary tact, judgment, pleasant manner and neat appearance for handling calls on customers' property; Must know the principles of operation and the proper application of fire fighting equipment installed on the properties or equipment to which assigned, and the first aid, safety and resuscitation practices prescribed by the Company; and Must pass motor vehicle operator tests prescribed by the Company must possess a valid State of Ohio, Bureau of Motor Vehicles Operator's Commercial Driver's License and a valid medical certificate.
Benefits, Compensation & Workforce Diversity At First Energy, employees are key to our success. We depend on their talents to meet the challenges of our changing business environment. We are committed to rewarding individual and team efforts through our total rewards philosophy which includes competitive pay plus incentive compensation, a company-sponsored pension plan, 401(k) savings plan with matching employer contribution, a choice of medical, prescription drug, dental, vision, and life insurance programs, as well as skills development training with tuition reimbursement.
Please visit our website at to learn more about all of our employee rewards programs. First Energy proudly supports workforce diversity. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, interaction, interactionual orientation, gender identity, age, status as a protected veteran, or status as a qualified individual with a disability.
No recruiters or agencies without a previously signed contract. Unable to sponsor or transfer H-1B visas at this time. Safety Safety is a core value for First Energy and is essential to all of our business activities. We ensure employees have the tools, information, and processes to perform their duties in a manner that assures safety for themselves, their co-workers, our customers and the public. Our goals are to provide a safe work environment, to maintain an accident-free, injury-free workplace, and to promote and maintain public safety.
To meet these goals, we dedicate ourselves to achieving world-class safety standards. Position Classification Non Bargaining/Physical First Energy Human Resources Team
recent, within last 3 years, relevant experience applying and developing nonlinear FEA methods for product performance investigations Experience using commercial FEA software codes; Abaqus required; experience with Nastran also preferred Proficiency with the following applications preferred: Nonlinear viscoelastic materials - characterization and application Solid and cord mechanics Contact and friction mechanics structural dynamics: rotating dynamics, eigenvalues, forced responses, and signal analysis concepts Computer coding skills using general purpose software; Python proficiency mandatory, Matlab, etc.
Candidates are required to pass a Criminal Background Check and a 10 Panel Drug
Screen. Only U. S. Citizens or persons with a Green Card work permit may apply. Due to the large amount of resumes we expect to receive only the most qualified candidates will be contacted.
We will retain all other resumes for any future job considerations. Email your resume to: Attention: JOB Please reference: " FEA Engineer - JOB " when applying for this position.
includes one of the nation's largest investor-owned electric systems, more than 24,000 miles of transmission lines that connect the Midwest and Mid-Atlantic regions, and a regulated generating fleet with a total capacity of more than 3,500 megawatts. About the Opportunity This is an open position with the First Energy Service Company, a subsidiary of First Energy Corp.
[SC00]As part of a newly created center of excellence team in the Supply Chain organization, this position will have responsibility to develop and lead projects delivering predominantly new vendor software to the First Energy Supply Chain organization and in some cases, to all of First Energy. Responsibilities include:
Coordinate activities of the Supply Chain subject matter experts and internal and external stakeholders including operating company representatives, consultants, and IT employees Implement new software tools in the e Procurement, risk, market intelligence, and warehouse management areas Complete projects on-scope, on-schedule, and on-budget Qualifications include: Bachelor or Associates Degree in Information Technology, Information Systems, Computer Science, Engineering, Project Management or related field, or related work experience Strong project management education, skills and background Experience coordinating project activities with consultants and subject matter experts in IT and
non-IT organizations 10+ years of experience managing complex, technical software implementations Subject matter expertise in software change control processes and movement of software changes through test and production environments Subject matter expertise in application development methodology including defining a project, requirements analysis, design, construct, test, implementation, and post implementation activities Able to provide advice and guidance to leadership on areas that will significantly impact operations and goals Excellent skills in Microsoft Office Excel, Power Point, Outlook and Word Detail-oriented, motivated, focused, and hard-working Superior written and verbal communication skills including the ability to present to executives within or outside the department Ability to lead and coach individuals without a direct reporting relationship Preferred Qualifications include: Experience developing detailed schedules for a portfolio of projects with various individual milestones Experience running projects to implement enterprise-wide software applications Ability to learn new concepts in information technology, learn the characteristics of new systems and update skills to adapt to changing technology Project management certification a plus but not required Familiarity with Supply Chain processes is preferred Experience with the Coupa application a plus but not required Benefits, Compensation & Workforce Diversity At First Energy, employees are key to our success.
We depend on their talents to meet the challenges of our changing business environment. We are committed to rewarding individual and team efforts through our total rewards philosophy which includes competitive pay plus incentive compensation, a company-sponsored pension plan, 401(k) savings plan with matching employer contribution, a choice of medical, prescription drug, dental, vision, and life insurance programs, as well as skills development training with tuition reimbursement.
Please visit our website at to learn more about all of our employee rewards programs. First Energy proudly supports workforce diversity. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, interaction, interactionual orientation, gender identity, age, status as a protected veteran, or status as a qualified individual with a disability. No recruiters or agencies without a previously signed contract.
Unable to sponsor or transfer H-1B visas at this time. Safety Safety is a core value for First Energy and is essential to all of our business activities. We ensure employees have the tools, information, and processes to perform their duties in a manner that assures safety for themselves, their co-workers, our customers and the public. Our goals are to provide a safe work environment, to maintain an accident-free, injury-free workplace, and to promote and maintain public safety. To meet these goals, we dedicate ourselves to achieving world-class safety standards. Position Classification Exempt First Energy Human Resources Team
includes one of the nation's largest investor-owned electric systems, more than 24,000 miles of transmission lines that connect the Midwest and Mid-Atlantic regions, and a regulated generating fleet with a total capacity of more than 3,500 megawatts. About the Opportunity This is an open position with First Energy Service Co.
a subsidiary of First Energy Corp. [FEU]This is the mid-level Project Development position located in the Portfolio Management team. While thisposition has the same overall responsibilities as all levels for managing, monitoring and controlling projectsto ensure that they safely achieve the project deliverables within the approved scope, cost and schedule. At this
level the employee is expected to manage any project in the portfolio with guidance as needed from the Supervisor. Projects assigned will progress in complexity and variety to facilitate acquiring a breadth of knowledge and experience to become a subject matter expert and progress to next level.
The Portfolio Project Development role is tailored to lead the project during the project development phase. This phase occurs during the initial stages of engineering. The goal of the position is to refine projects to eliminate unknowns/risks by developing detailed scope, estimates, schedules, and execution plans while interacting with multiple internal/external teams. Thedetailed scopes, estimates,
schedules, and execution plans that are developed during the projectdevelopment phase will be assembled and transitioned to the project management organization forexecution of the project.
Responsibilities include: Providing a technical review of the project solution. Leading the refinement of project scope documents. Coordination of multiple internal/external support teams to ensure project assumptions are vetted and resolved. Hosting site walk downs and multiple project execution discussions. Determine and resolve anyproject constructability concerns. Reviewing project documents for clarity and completeness -- examples include scope documents, project plans, contracts, equipment and construction bid packages, requisitions, Bills of Material or Material Requests for Issue, Task Authorizations, and Engineering Work Requests.
Reviewing project and contract budgets for adequacy and completeness. Ensure budget revisions aremade and documented when required. Ensuring change management protocols are followed to maintain complete documentation of changes in scope, schedule and cost. Providing project status reports including recurring, standard and ad hoc reports that address thestatus of scope, budget and schedule for the assigned projects.
Also develop reports that identify risks with a mitigation strategy. Obtaining concurrence (or buy-in) from affected departments to support the proposed schedule andresource requirements. Supporting the development of detailed project estimates including contingency. Developing, with input of project team, the strategic and tactical execution plan for the project. Coordinating outage availability with operations and submit outage requests per PJM/Internaltimelines. Coordinating the equipment purchase/delivery plans to ensure efficient project execution. Forecasting contractor/internal resource levels needed to support execution.
Ensuring adequacy of Project Team membership and participation. Responsible for overseeing theactivities of consultants and assigned contractors. Communicating project goals, priorities and decisions to the Region/Corporate Leadership Team. Developing detailed project forecasts and ensure project challenge meetings, peer reviews andassessments are performed. Working with Project Controls to develop and update the project schedule. Identifying and notify the Project Team of additional resources or requirements necessary to meet the project scope or schedule Developing and maintaining project status documents for handoff to project managementorganization.
Developing and communicating lessons learned by leading a project review process. Supporting the Rate Development Process for formula recovery locations. Coordinating with Portfolio Management Team to develop the multiyear portfolio. Qualifications include: Bachelor of Science degree in Business, Engineering, Finance, Construction Management or related field is required. Minimum of 3 years' related experience required. In lieu of degree, consideration will be given to applicants having 7 years related experience or 5 years transmission experience.
Related experience includes project organization, engineering, finance, construction, project management, planning or project controls. Strong project management skills are required with a demonstrated ability to develop, manage andcontrol multiple tasks. Experience with project management tools such as Primavera, MS Project, etc. with related Scheduling/Resource Planning expertise is preferred. Excellent interpersonal skills, strong written and verbal communication skills and strong analyticalability are required.
Successful candidate must be a team player and possess a willingness to work in a teamenvironment. Benefits, Compensation & Workforce Diversity At First Energy, employees are key to our success. We depend on their talents to meet the challenges of our changing business environment. We are committed to rewarding individual and team efforts through our total rewards philosophy which includes competitive pay plus incentive compensation, a company-sponsored pension plan, 401(k) savings plan with matching employer contribution, a choice of medical, prescription drug, dental, vision, and life insurance programs, as well as skills development training with tuition reimbursement.
Please visit our website at to learn more about all of our employee rewards programs. First Energy proudly supports workforce diversity. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, interaction, interactionual orientation, gender identity, age, status as a protected veteran, or status as a qualified individual with a disability. No recruiters or agencies without a previously signed contract. Unable to sponsor or transfer H-1B visas at this time.
Safety Safety is a core value for First Energy and is essential to all of our business activities. We ensure employees have the tools, information, and processes to perform their duties in a manner that assures safety for themselves, their co-workers, our customers and the public. Our goals are to provide a safe work environment, to maintain an accident-free, injury-free workplace, and to promote and maintain public safety. To meet these goals, we dedicate ourselves to achieving world-class safety standards.
the primary point of contact for internal and external stakeholders on all matters pertaining to the president. This dynamic position requires the ability to anticipate needs, think critically, and offer solutions to problems with a high level of professionalism and confidentiality.
This role requires the ability to work independently on tasks and projects and thrive in a multi-faceted and fast paced environment. Duties Include: Demonstrating a solid commitment to all aspects of safety including maintaining a safe workplace for coworkers Providing sophisticated calendar and travel management. Prioritizing inquiries and requests, while troubleshooting conflicts; making judgments and
recommendations to ensure effective day to day scheduling Completing a broad variety of administrative tasks that facilitate the president's ability to effectively lead the organization, including collecting and preparing information for meetings, composing and preparing correspondence, designing and producing complex documents, reports, and presentations, managing contact lists, making travel arrangements, completing expense and mileage reports, and completing special projects as assigned Serving as the primary point of contact with other First Energy executives, for internal and external stakeholders, and for external visitors, including matters of a highly confidential or critical nature.
Researching and prioritizing before determining the appropriate course of action, referral, or response.
Exercising judgment to reflect the president's style and organization policy. Communicating directly, on behalf of the president, and responding to emails, texts, phone calls outside of normal business hours, as needed Keeping the president well informed of upcoming commitments and responsibilities, following up appropriately Effectively managing the president's time by reading, researching, collecting and analyzing information as needed, in advance Maintaining discretion and confidentiality. Managing information and materials of a sensitive or confidential nature Maintaining a well-organized filing system for key material sand reports (electronic and hard copy) Using excellent communication skills with good judgment Anticipating needs and delivering results consistently Displaying excellent teamwork while working with other assistants and employees Supporting other executives from time to time Assisting with other duties and responsibilities as assigned Summary of Qualifications Include: High school diploma or GED required Minimum 10 years comparable work experience required, including experience providing support to C-level executive Must pass company Support and Administrative Selection System (SASS) test Expert proficiency with Microsoft Office and Outlook Email and Calendaring; ability to design and edit graphic presentations and materials Excellent verbal and written communication and time management skills; proven ability to meet deadlines.
Make appropriate, informed decisions regarding priorities and available time Exceptional organizational skills and impeccable attention to detail Must demonstrate a commitment to performance excellence Ability to maintain a high level of integrity and discretion in handling confidential information Demonstrate a questioning attitude to continue to learn, produce results, and strengthen existing relationships Model active learning through continuing to develop breadth of knowledge, skills, and perspective Must demonstrate business acumen - have the ability to decipher priorities and make sound judgment calls High degree of professionalism and confidence in dealing with diverse groups of people, including Board members, senior executives, staff, employees, community leaders, customers and other external parties Demonstrate a team oriented and collaborative approach to work Ability to think creatively and with a sense of urgency to situations and events that require quick response or turnaround Ability to function well in a high-paced environment and switch gears at a moment's notice Must have the ability to deliver quality, accurate work within established deadlines Excellent interpersonal skills and the ability to build relationships with stakeholders, including all levels of employees, customers and external partners Exceptional teamwork skills Strong verbal and written communication skills Ability to independently prioritize workloads, meet deadlines and work in pressure situations Ability to work in a fast-paced environment, yet maintain a continued focus on the details required to perform the essential functions of the job Strong organizational skills that reflect ability to perform and prioritize multiple tasks seamlessly with excellent attention to detail Proven ability to handle a high degree of confidential information with discretion, be adaptable to various competing demands, and demonstrate the highest level of customer/client service and response Excellent customer service skills Ability to effectively build relationships and maintain positive interactions with all levels of employees Ability to work independently on special assignments as directed by management Ability to make recommendations for process improvements, as necessary Benefits, Compensation & Workforce Diversity At First Energy, employees are key to our success.
We depend on their talents to meet the challenges of our changing business environment. We are committed to rewarding individual and team efforts through our total rewards philosophy which includes competitive pay plus incentive compensation, a company-sponsored pension plan, 401(k) savings plan with matching employer contribution, a choice of medical, prescription drug, dental, vision, and life insurance programs, as well as skills development training with tuition reimbursement.
Please visit our website at to learn more about all of our employee rewards programs. First Energy proudly supports workforce diversity. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, interaction, interactionual orientation, gender identity, age, status as a protected veteran, or status as a qualified individual with a disability.
No recruiters or agencies without a previously signed contract. Unable to sponsor or transfer H-1B visas at this time. Safety Safety is a core value for First Energy and is essential to all of our business activities. We ensure employees have the tools, information, and processes to perform their duties in a manner that assures safety for themselves, their co-workers, our customers and the public. Our goals are to provide a safe work environment, to maintain an accident-free, injury-free workplace, and to promote and maintain public safety. To meet these goals, we dedicate ourselves to achieving world-class safety standards. First Energy Human Resources Team
