Location: Troy, OH
strong background of practicing in the weld engineering of turn-key manufacturing systems that were built to support various production requirements for a wide variety of industries including Automotive and Appliance. Practical knowledge of the manufacturing disciplines used within a job shop environment to build automated systems is required.
Role qualifications: Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. Position responsibilities: Work with Department Managers on a regular basis to identify areas of improvement that will attain higher levels of customer satisfaction. Review designs and make recommendations
for material selection and joint geometry based on design objectives, such as strength, weight, heat resistance, electrical conductivity, and materials. Analyze data and Validate weld quality as part of system requirements.
(Cut and Etch, Pull Tests, etc. ) Assist in selection of welding equipment and sizing lasers for various laser welding applications as well as developing of welding parameters and settings for each. (Autogenous, Hybrid, Laser Hot Wire, Laser Cold Wire, Laser Brazing, Laser Metal Deposition, etc. ) Assist in selection of welding equipment for Spot Welding, Drawn Arc Welding, Projection Welding, etc. as well as developing of welding parameters and settings for each.
Assist in selection of welding equipment for various MIG/MAG welding as well as developing of welding parameters and settings for each.
Assist in Friction Stir welding design and setting up of parameters. Assist in certification of welders. Analyze welds for conformance to spec’s for military and similar contracts. Assist in selection of Laser equipment for other various Laser processes as well as development of parameters. (Cutting, Marking, Ablation, etc. ) Program Robotic Systems. Provide training to others on proper welding settings and techniques. Provide feedback regarding system design to optimize welds. (Torch Angles, access, etc. ) Develop solutions and determine proper weld sequence for cycle time and part dimensional.
Monitor material performance and evaluate material deterioration. Audit and evaluate fabrication vendors for adherence to standards. Conduct feasibility projects and develop system prospects based on results. Stay abreast of current technologies. Other roles and responsibilities as determined by Management Assist in certification of welders. Travel up to 25% of the time to support our projects, training and other requirements. Essential skills and experience: Bachelor’s Degree or equivalent demonstrated experience in Weld Engineering, Metallurgy and/or other principle degree.
2 to 5 years’ experience in manufacturing and/or design of industrial automated equipment. Some robotic experience preferred. Educational, training, and experience requirements may be modified at the Management Team’s discretion. Complete PC capabilities, using MS office programs and others as required, and ability to develop computer programs or spreadsheets for specific analyses. Previous work with welding equipment and materials such as ferrous and non-ferrous alloys. Prefer Certified Weld Inspector or familiarity with AWS code. Nonessential skills and experience: Computer proficiency, including spreadsheet, and word processing.
FMEA, Equipment Capability, Safety (OSHA, RIA, ANSI Stds. ) Reporting to this position: none Environmental, Health & Safety (EH&S) Understand the Company’s EHS Policy and how it relates to this job. Be aware of OSHA & EPA laws and regulations as well as the Company’s Plant Rules and Regulations that pertain to this job. Work in a safe and environmentally friendly manner and observe all company EHS procedures. Know that the company EHS procedures are located on the ISO drive. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures.
Attend required EHS training Physical demands and work environment: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; talk and hear.
Be able to climb ladders; lift hand tools approx. 1-15 lbs. in weight to complete machine assembly, parts up to 50 lbs. Repetition with activity. Work environment: The noise level in the work environment is usually moderate to high. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, interaction, protected veteran status or disability. Lincoln Electric is a $3.2B publicly traded company (NASDAQ) with over 11,000 employees around the world.
With operations in over 56 manufacturing locations in 19 countries, we are well positioned to continue this partnership and poised to grow with our customers. As a part of that continuing legacy, you will contribute to a new generation of innovation and experience the pride that comes with being part of the solution to the world’s challenges. It is a great time to be part of the welding industry! Lincoln Electric does not accept unsolicited resumes from third-party recruiters. Resumes submitted to any employee(s) of Lincoln Electric without a signed vendor agreement, by the Manager of Recruiting & Training, will become property of Lincoln Electric.
Verbal or written commitments from any other member of Lincoln Electric will not be considered binding terms. Lincoln Electric will not pay a fee to any third-party recruiter that has not coordinated their recruiting activity through the Recruiting Department. Employment Status: Salary Full-Time EOE, including disability/veterans www. jobs.
ways to beautify and bond, and do it all with not only confidence but determination. Position Summary Edgewell is seeking to hire a Manufacturing Engineer at our manufacturing facility located in Sidney, Ohio. In this position, you will m anage and coordinate the implementation of batching and converting process improvements.
This results in daily operation efficiency improvements within the plant environment. The Manufacturing Engineer provides technical knowledge in the trouble shooting of operational problems within the facility. Work with the operational team to improve plant-manufacturing efficiencies and provide support in continuous improvement process of finished goods produced
within the business. Provide support for smooth and timely introductions of new and modified packages. Essential Functions The essential accountability of this position is to design and execute projects in support of business needs and objectives.
Provide daily technical support to operations staff in the trouble shooting of equipment and processes in an FDA regulated environment. Develops, evaluates, and improves manufacturing methods. Analyzes and plans work force utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency. Estimates production times, staffing requirements, and related costs to provide information for management
decisions. Resolves deviation reports concerning product or material with plant personnel including maintenance personnel to direct equipment adjustments.
Distributes product/part drawings to appropriate plant personnel. Manage the delivery process of equipment modifications within the manufacturing environment. Work with project team to investigate and implement equipment and process changes to expand and develop the business. Initiate and implement improvements to current equipment to increase efficiencies and optimize manufacturing costs. Provide technical assistance to plant maintenance in the modification of plant equipment. Maintain current knowledge of Lean Manufacturing methodologies, prepare capital request, cost justifications to support recommendations.
Prioritize and implement schedules for assigned projects using appropriate planning methods and facilitate project implementation. Serve a facilitator coach for teams during Kaizen events and follow up to assist supervisors to sustain work improvement. Prepare final equipment specification package and equipment shakedown, qualification and verification test procedures for new and modified packaging equipment. Create Capital Asset Request (CAR) for the purchase of new equipment and facility improvements.
The CAR process includes calculating the cost of new equipment and justifying the purchase by calculating savings and efficiency in a formal written document. Implement cost benefits through equipment improvements resulting in more efficient packaging operation. Active participation in competitive product and value analysis programs to suggest and follow through on new opportunities. Work across departmental lines to establish and develop equipment suppliers, which will continually contribute new and improved packaging converting ideas. Ensures that new and existing equipment is compliant with all applicable government regulations (e.
g. DOT, EPA, FDA, OSHA, etc. ) Lead the development of packaging process improvements, which improve plant efficiencies. Actively participate in plant cost savings, safety and quality activities. Maintain current technical knowledge in the engineering field. Project Management Skills. Provide Accounting with NPD support. Travel to support suppliers as required. Perform other similar duties as assigned. Required Skills and Experience Bachelor's degree in Manufacturing / Industrial Engineering or related field from a four-year college or university required.
Prefer knowledge of Lean Manufacturing methodologies and a proven track record with application. Minimum of 2 years manufacturing experience, preferably in a high speed, c GMP environment. Other Required Knowledge, Skills & Abilities: Prior experience with major equipment relocations including start up, de-bug and validation execution. Good communications skills – must be able to develop specifications, proposals, RFP’s and presentations and communicate effectively within the organization, both laterally and vertically. Working knowledge of “Auto CAD” or equivalent CAD system, MS Project, and MS Office.
Results oriented, hands-on individual, with the ability to lead sub-groups, task forces or teams to effectively solve machinery problems ranging from simple (slight modification/addition of single component) to complex (total re-design) on high-speed, high-volume machinery. Ability to analyze, design, plan and manage equipment installations. Preferred Skills Inquisitive personality and willingness to work outside of their comfort zone Proven ability to manage a project from start to finish Experience with Root Cause Analysis techniques and Problem-Solving techniques Lean Manufacturing/ Six Sigma background Working Relationships Reports to Plant Manager Key relationships internally will include: 1.
Manufacturing and Quality Assurance. 2. Product Development and Innovation Teams. 3. Program Management, Tech Transfer 4. Professional and technical staff in the Department Work Environment Some travel may be required. Work on night shifts and weekends may be required to support business needs. Exposure to health risks or conditions that may require the use of Personal Protective Equipment. The salary range for this position is $68,000 - $102,000. Actual base salary offered to a candidate may vary based upon factors including, but not limited to, relevant experience, time in role, base salary of internal peers, prior performance, business sector, and geographic location.
In addition to base salary, the competitive compensation package may include, depending on the role, participation in an incentive program linked to performance. #LI-DR1 Edgewell is an equal opportunity employer. We do all we can to create a collaborative and diverse global team, where good ideas can thrive, and our colleagues can learn and lead. We prohibit discrimination based on age, color, disability, marital or parental status, national origin, race, religion, interaction, interactionual orientation, gender identity, veteran status or any legally protected status in accordance with applicable federal, state and local laws.
We listen deeply and speak directly to create an environment that’s open to difference. We aim to bring joy to not only the products we create and the people we serve, but our colleagues across the globe too.
Responsibilities The Process Technician is a key member of the Manufacturing Engineering Team that supports products and processes within the Plant. Participate in Engineering design reviews for new and existing products. Work with Engineering to define work methods and work sequences in the development of new products and processes.
Support daily shop floor operations, troubleshoot, and resolve production and quality issues, and implement process improvements. Perform analysis, data collection, and document operator standard work. Analyze, recommend, and implement layout and process flow improvements. Develop workstation and line layouts, balancing of work content, determination of labor
requirements, material handling and storage solutions, process documentation, and operator training as needed. Qualifications Two-year Technical Degree in a related field is preferred.
Must be mechanically inclined and have good computer skills, including experience with Excel and Mechanical Drawing Software. Must have a basic understanding of electrical troubleshooting using a digital multimeter. Good communication, problem solving, and interpersonal skills required. Additional Information Work Schedule: Monday through Thursday 3:00pm - 1:10am (4-10 schedule) Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position
for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire.
No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EO/AA Employer Minorities/Females/Protected Veterans/Disabled
Responsibilities The Process Technician is a key member of the Manufacturing Engineering Team that supports products and processes within the Plant. Participate in Engineering design reviews for new and existing products. Work with Engineering to define work methods and work sequences in the development of new products and processes.
Support daily shop floor operations, troubleshoot, and resolve production and quality issues, and implement process improvements. Perform analysis, data collection, and document operator standard work. Analyze, recommend, and implement layout and process flow improvements. Develop workstation and line layouts, balancing of work content, determination of labor
requirements, material handling and storage solutions, process documentation, and operator training as needed. Qualifications Two-year Technical Degree in a related field is preferred.
Must be mechanically inclined and have good computer skills, including experience with Excel and Mechanical Drawing Software. Must have a basic understanding of electrical troubleshooting using a digital multimeter. Good communication, problem solving, and interpersonal skills required. Additional Information Work Schedule: Monday through Thursday (4-10 schedule), Tuesday through Friday (4-10 schedule), or Monday through Friday (5-8 schedule) Work Authorization: Crown will only employ those who are legally
authorized to work in the United States. This is not a position for which sponsorship will be provided.
Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EO/AA Employer Minorities/Females/Protected Veterans/Disabled
includes one of the nation's largest investor-owned electric systems, more than 24,000 miles of transmission lines that connect the Midwest and Mid-Atlantic regions, and a regulated generating fleet with a total capacity of more than 3,500 megawatts. About the Opportunity This is an open position with First Energy Service Co.
a subsidiary of First Energy Corp. [FEU]The Supervisor, Transmission Engineering Design is responsible for supervising a team of engineers, designers, and drafters. This position requires an understanding of projects relating to the design, construction and maintenance of transmission facilities. The ideal candidate will possess working knowledge of PLS-CADD as well
as an understanding of transmission design and analyses, wire sag and clearance calculations, NESC and OSHA clearance requirements, development of design packages, creation of bills-of-material for transmission line projects, and creation of standards.
Additional experience with the Power Line Systems design suite and foundation design is a plus. Responsibilities include: Developing and maintaining a safe environment for the transmission line network to ensure the safety of FE employees, contractors, and the public. Reviewing engineering designs and standards. Supporting work crews during construction including office work and field visits. Must be able to coordinate designs across
First Energy (Operating Companies, Siting and Permitting, Project Development, Project Management, Maintenance, Forestry, Real Estate, Environmental, Substations and Construction).
Working with various industry and regulatory groups as required to learn and advocate industry best practices (e. g. EPRI, EEI, NATF, etc. ). Appearing on behalf of First Energy at local public zoning hearings and planning committee meetings, and state utility commission hearings as a subject matter expert. Providing engineering support and mentorship to employees to assist in their learning. Managing transmission line encroachments to ensure NESC clearance requirements are met.
Coordinating encroachment responses with Right-of-Way Services and Transmission Line Maintenance personnel and ensure that public safety is protected. Providing assistance during emergencies and storm related activities. Preparing and/or reviewing engineering design calculations, reports, specifications and construction documents, and other technical documents as needed, in coordination with staff and project team members. Researching and exploring new technologies to enhance processes, increasing efficiencies, while decreasing the risk of human error. Manage project workload and Issue for Construction due dates.
Qualifications include: A Bachelor of Science degree in Civil, Electrical, or Mechanical Engineering (BSCE, BSEE, BSME) from an ABET accredited institution is required. Acceptable alternatives are: (1) a Professional Engineer's (PE) License (2) a Bachelor's degree in Electrical, Civil or Mechanical Engineering or technical field of study (non-ABET) plus an advanced degree in Electrical, Civil or Mechanical Engineering from a university with an ABET accredited Bachelor's program is required. Minimum of 8 years of engineering experience is required. A Professional Engineering (PE) Certificate is preferred.
Capable of communicating, motivating, and driving positive change and improvement. Must demonstrate effective analytical and reasoning capabilities and writing skills, including ability to effectively structure and confidently present information to peers, industry work groups, regulatory bodies, and leadership of First Energy. Must be able to handle a variety of complex issues and assignments. Must adhere to First Energy's Code of Conduct and industry compliance obligations. Must demonstrate a questioning attitude to continue to learn, produce results, and strengthen existing relationships.
Related experience includes engineering, engineering standards, budget practices, field practices, equipment specifications, and maintenance practices. Must possess strong organizational, computer, planning, budgeting, and problem-solving skills. Must be self-directed and independent. Must embrace a safety culture and maintain a safe work environment for co-workers and the public. Must be able to manage many projects simultaneously and be able to work effectively under the pressure of deadlines, unexpected developments, changes in project scope, budget constraints, unforeseen field questions, and demands on time for work assignments outside of the normal duties.
Must have strong interpersonal skills as well as the ability to develop and maintain relationships across FE and with outside firms. Ability to coach and develop employees. Benefits, Compensation & Workforce Diversity At First Energy, employees are key to our success. We depend on their talents to meet the challenges of our changing business environment. We are committed to rewarding individual and team efforts through our total rewards philosophy which includes competitive pay plus incentive compensation, a company-sponsored pension plan, 401(k) savings plan with matching employer contribution, a choice of medical, prescription drug, dental, vision, and life insurance programs, as well as skills development training with tuition reimbursement.
Please visit our website at to learn more about all of our employee rewards programs. First Energy proudly supports workforce diversity. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, interaction, interactionual orientation, gender identity, age, status as a protected veteran, or status as a qualified individual with a disability.
No recruiters or agencies without a previously signed contract. Unable to sponsor or transfer H-1B visas at this time. Safety Safety is a core value for First Energy and is essential to all of our business activities. We ensure employees have the tools, information, and processes to perform their duties in a manner that assures safety for themselves, their co-workers, our customers and the public. Our goals are to provide a safe work environment, to maintain an accident-free, injury-free workplace, and to promote and maintain public safety.
To meet these goals, we dedicate ourselves to achieving world-class safety standards.
includes one of the nation's largest investor-owned electric systems, more than 24,000 miles of transmission lines that connect the Midwest and Mid-Atlantic regions, and a regulated generating fleet with a total capacity of more than 3,500 megawatts. About the Opportunity This is an open position with Ohio Edison Co.
a subsidiary of First Energy Corp. [FEU]Location: Springfield, OHResponsibilities Under general directive supervision, performs duties in connection with the location and isolation of faults and the restoration and maintenance of service on transmission and distribution lines; carries through assignments, at times with the assistance of other employees; performs duties such
as: Locating and repairing faults on lines and equipment; Performing various operations such as paralleling circuits to restore service, isolating underground cables, switching transmission and distribution circuits; Reporting at fires or scenes of accidents involving the Company; clearing wires; cutting off electric services when necessary; isolating sections of line; cooperating with public authorities in applying resuscitation and in other emergencies; Making emergency repairs or determining the extent of necessary repairs; requesting the services of a line crew for major repairs; Perform rubber gloving work on equipment up to 23,000 volts with one additional qualified person.
Performing switching and tagging operations in unattended substations, as directed; Replacing customer's fuses; Receiving customer telephone calls, as required; handling appropriate trouble calls and referring others to the proper employee; Handling meter turn-ons and turn-offs, connecting, disconnecting, installing and removing services; collecting money, as required; Patrolling lines; checking voltages; handling voltage complaints; Performing, when assigned, street light patrolling duties such as: patrolling street lights as assigned; replacing burned out bulbs and glassware; locating and repairing faults on street lighting circuits, which may be energized; locating and repairing faults on distribution lines which are the cause of trouble on street lighting circuits; and assisting other line serviceman in their duties Making trouble and interruption reports or reports of service calls, as required; preparing the necessary clerical work; Maintaining truck stock at prescribed levels; Directing and training employees assigned to the work; Performing the duties of Lineman-A; and Performing other work, as assigned.
Qualifications Must meet the Company's requirements as to General Qualifications; must have all the qualifications of Lineman-A and, in addition: Must have at least one year's experience as Lineman-A, or the equivalent; Must have demonstrated aptitude for and ability in the performance of the duties of Lineman-A; Must have a thorough practical knowledge of the principles and operation of the Company's electric distribution, street lighting and transmission systems in the area to which assigned, including protective devices and rubber gloving practices.
Must be thoroughly familiar with the location of roads, line circuits, substations and large power customers in the area to which assigned; Must be thoroughly familiar with the procedures and rules for ordering out and tagging of circuits and the Company's identification system for circuits; Must be able to diagnose trouble and solve the problem encountered; Must be able to make clear, concise, and accurate reports and properly receive and quickly and correctly interpret orders; Must have the necessary tact, judgment, pleasant manner and neat appearance for handling calls on customers' property; Must know the principles of operation and the proper application of fire fighting equipment installed on the properties or equipment to which assigned, and the first aid, safety and resuscitation practices prescribed by the Company; and Must pass motor vehicle operator tests prescribed by the Company must possess a valid State of Ohio, Bureau of Motor Vehicles Operator's Commercial Driver's License and a valid medical certificate.
Benefits, Compensation & Workforce Diversity At First Energy, employees are key to our success. We depend on their talents to meet the challenges of our changing business environment. We are committed to rewarding individual and team efforts through our total rewards philosophy which includes competitive pay plus incentive compensation, a company-sponsored pension plan, 401(k) savings plan with matching employer contribution, a choice of medical, prescription drug, dental, vision, and life insurance programs, as well as skills development training with tuition reimbursement.
Please visit our website at to learn more about all of our employee rewards programs. First Energy proudly supports workforce diversity. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, interaction, interactionual orientation, gender identity, age, status as a protected veteran, or status as a qualified individual with a disability.
No recruiters or agencies without a previously signed contract. Unable to sponsor or transfer H-1B visas at this time. Safety Safety is a core value for First Energy and is essential to all of our business activities. We ensure employees have the tools, information, and processes to perform their duties in a manner that assures safety for themselves, their co-workers, our customers and the public. Our goals are to provide a safe work environment, to maintain an accident-free, injury-free workplace, and to promote and maintain public safety.
To meet these goals, we dedicate ourselves to achieving world-class safety standards. Position Classification Non Bargaining/Physical First Energy Human Resources Team
recent, within last 3 years, relevant experience applying and developing nonlinear FEA methods for product performance investigations Experience using commercial FEA software codes; Abaqus required; experience with Nastran also preferred Proficiency with the following applications preferred: Nonlinear viscoelastic materials - characterization and application Solid and cord mechanics Contact and friction mechanics structural dynamics: rotating dynamics, eigenvalues, forced responses, and signal analysis concepts Computer coding skills using general purpose software; Python proficiency mandatory, Matlab, etc.
Candidates are required to pass a Criminal Background Check and a 10 Panel Drug
Screen. Only U. S. Citizens or persons with a Green Card work permit may apply. Due to the large amount of resumes we expect to receive only the most qualified candidates will be contacted.
We will retain all other resumes for any future job considerations. Email your resume to: Attention: JOB Please reference: " FEA Engineer - JOB " when applying for this position.
includes one of the nation's largest investor-owned electric systems, more than 24,000 miles of transmission lines that connect the Midwest and Mid-Atlantic regions, and a regulated generating fleet with a total capacity of more than 3,500 megawatts. About the Opportunity This is an open position with the First Energy Service Company, a subsidiary of First Energy Corp.
[SC00]As part of a newly created center of excellence team in the Supply Chain organization, this position will have responsibility to develop and lead projects delivering predominantly new vendor software to the First Energy Supply Chain organization and in some cases, to all of First Energy. Responsibilities include:
Coordinate activities of the Supply Chain subject matter experts and internal and external stakeholders including operating company representatives, consultants, and IT employees Implement new software tools in the e Procurement, risk, market intelligence, and warehouse management areas Complete projects on-scope, on-schedule, and on-budget Qualifications include: Bachelor or Associates Degree in Information Technology, Information Systems, Computer Science, Engineering, Project Management or related field, or related work experience Strong project management education, skills and background Experience coordinating project activities with consultants and subject matter experts in IT and
non-IT organizations 10+ years of experience managing complex, technical software implementations Subject matter expertise in software change control processes and movement of software changes through test and production environments Subject matter expertise in application development methodology including defining a project, requirements analysis, design, construct, test, implementation, and post implementation activities Able to provide advice and guidance to leadership on areas that will significantly impact operations and goals Excellent skills in Microsoft Office Excel, Power Point, Outlook and Word Detail-oriented, motivated, focused, and hard-working Superior written and verbal communication skills including the ability to present to executives within or outside the department Ability to lead and coach individuals without a direct reporting relationship Preferred Qualifications include: Experience developing detailed schedules for a portfolio of projects with various individual milestones Experience running projects to implement enterprise-wide software applications Ability to learn new concepts in information technology, learn the characteristics of new systems and update skills to adapt to changing technology Project management certification a plus but not required Familiarity with Supply Chain processes is preferred Experience with the Coupa application a plus but not required Benefits, Compensation & Workforce Diversity At First Energy, employees are key to our success.
We depend on their talents to meet the challenges of our changing business environment. We are committed to rewarding individual and team efforts through our total rewards philosophy which includes competitive pay plus incentive compensation, a company-sponsored pension plan, 401(k) savings plan with matching employer contribution, a choice of medical, prescription drug, dental, vision, and life insurance programs, as well as skills development training with tuition reimbursement.
Please visit our website at to learn more about all of our employee rewards programs. First Energy proudly supports workforce diversity. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, interaction, interactionual orientation, gender identity, age, status as a protected veteran, or status as a qualified individual with a disability. No recruiters or agencies without a previously signed contract.
Unable to sponsor or transfer H-1B visas at this time. Safety Safety is a core value for First Energy and is essential to all of our business activities. We ensure employees have the tools, information, and processes to perform their duties in a manner that assures safety for themselves, their co-workers, our customers and the public. Our goals are to provide a safe work environment, to maintain an accident-free, injury-free workplace, and to promote and maintain public safety. To meet these goals, we dedicate ourselves to achieving world-class safety standards. Position Classification Exempt First Energy Human Resources Team
includes one of the nation's largest investor-owned electric systems, more than 24,000 miles of transmission lines that connect the Midwest and Mid-Atlantic regions, and a regulated generating fleet with a total capacity of more than 3,500 megawatts. About the Opportunity This is an open position with First Energy Service Co.
a subsidiary of First Energy Corp. [FEU]This is the mid-level Project Development position located in the Portfolio Management team. While thisposition has the same overall responsibilities as all levels for managing, monitoring and controlling projectsto ensure that they safely achieve the project deliverables within the approved scope, cost and schedule. At this
level the employee is expected to manage any project in the portfolio with guidance as needed from the Supervisor. Projects assigned will progress in complexity and variety to facilitate acquiring a breadth of knowledge and experience to become a subject matter expert and progress to next level.
The Portfolio Project Development role is tailored to lead the project during the project development phase. This phase occurs during the initial stages of engineering. The goal of the position is to refine projects to eliminate unknowns/risks by developing detailed scope, estimates, schedules, and execution plans while interacting with multiple internal/external teams. Thedetailed scopes, estimates,
schedules, and execution plans that are developed during the projectdevelopment phase will be assembled and transitioned to the project management organization forexecution of the project.
Responsibilities include: Providing a technical review of the project solution. Leading the refinement of project scope documents. Coordination of multiple internal/external support teams to ensure project assumptions are vetted and resolved. Hosting site walk downs and multiple project execution discussions. Determine and resolve anyproject constructability concerns. Reviewing project documents for clarity and completeness -- examples include scope documents, project plans, contracts, equipment and construction bid packages, requisitions, Bills of Material or Material Requests for Issue, Task Authorizations, and Engineering Work Requests.
Reviewing project and contract budgets for adequacy and completeness. Ensure budget revisions aremade and documented when required. Ensuring change management protocols are followed to maintain complete documentation of changes in scope, schedule and cost. Providing project status reports including recurring, standard and ad hoc reports that address thestatus of scope, budget and schedule for the assigned projects.
Also develop reports that identify risks with a mitigation strategy. Obtaining concurrence (or buy-in) from affected departments to support the proposed schedule andresource requirements. Supporting the development of detailed project estimates including contingency. Developing, with input of project team, the strategic and tactical execution plan for the project. Coordinating outage availability with operations and submit outage requests per PJM/Internaltimelines. Coordinating the equipment purchase/delivery plans to ensure efficient project execution. Forecasting contractor/internal resource levels needed to support execution.
Ensuring adequacy of Project Team membership and participation. Responsible for overseeing theactivities of consultants and assigned contractors. Communicating project goals, priorities and decisions to the Region/Corporate Leadership Team. Developing detailed project forecasts and ensure project challenge meetings, peer reviews andassessments are performed. Working with Project Controls to develop and update the project schedule. Identifying and notify the Project Team of additional resources or requirements necessary to meet the project scope or schedule Developing and maintaining project status documents for handoff to project managementorganization.
Developing and communicating lessons learned by leading a project review process. Supporting the Rate Development Process for formula recovery locations. Coordinating with Portfolio Management Team to develop the multiyear portfolio. Qualifications include: Bachelor of Science degree in Business, Engineering, Finance, Construction Management or related field is required. Minimum of 3 years' related experience required. In lieu of degree, consideration will be given to applicants having 7 years related experience or 5 years transmission experience.
Related experience includes project organization, engineering, finance, construction, project management, planning or project controls. Strong project management skills are required with a demonstrated ability to develop, manage andcontrol multiple tasks. Experience with project management tools such as Primavera, MS Project, etc. with related Scheduling/Resource Planning expertise is preferred. Excellent interpersonal skills, strong written and verbal communication skills and strong analyticalability are required.
Successful candidate must be a team player and possess a willingness to work in a teamenvironment. Benefits, Compensation & Workforce Diversity At First Energy, employees are key to our success. We depend on their talents to meet the challenges of our changing business environment. We are committed to rewarding individual and team efforts through our total rewards philosophy which includes competitive pay plus incentive compensation, a company-sponsored pension plan, 401(k) savings plan with matching employer contribution, a choice of medical, prescription drug, dental, vision, and life insurance programs, as well as skills development training with tuition reimbursement.
Please visit our website at to learn more about all of our employee rewards programs. First Energy proudly supports workforce diversity. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, interaction, interactionual orientation, gender identity, age, status as a protected veteran, or status as a qualified individual with a disability. No recruiters or agencies without a previously signed contract. Unable to sponsor or transfer H-1B visas at this time.
Safety Safety is a core value for First Energy and is essential to all of our business activities. We ensure employees have the tools, information, and processes to perform their duties in a manner that assures safety for themselves, their co-workers, our customers and the public. Our goals are to provide a safe work environment, to maintain an accident-free, injury-free workplace, and to promote and maintain public safety. To meet these goals, we dedicate ourselves to achieving world-class safety standards.
the primary point of contact for internal and external stakeholders on all matters pertaining to the president. This dynamic position requires the ability to anticipate needs, think critically, and offer solutions to problems with a high level of professionalism and confidentiality.
This role requires the ability to work independently on tasks and projects and thrive in a multi-faceted and fast paced environment. Duties Include: Demonstrating a solid commitment to all aspects of safety including maintaining a safe workplace for coworkers Providing sophisticated calendar and travel management. Prioritizing inquiries and requests, while troubleshooting conflicts; making judgments and
recommendations to ensure effective day to day scheduling Completing a broad variety of administrative tasks that facilitate the president's ability to effectively lead the organization, including collecting and preparing information for meetings, composing and preparing correspondence, designing and producing complex documents, reports, and presentations, managing contact lists, making travel arrangements, completing expense and mileage reports, and completing special projects as assigned Serving as the primary point of contact with other First Energy executives, for internal and external stakeholders, and for external visitors, including matters of a highly confidential or critical nature.
Researching and prioritizing before determining the appropriate course of action, referral, or response.
Exercising judgment to reflect the president's style and organization policy. Communicating directly, on behalf of the president, and responding to emails, texts, phone calls outside of normal business hours, as needed Keeping the president well informed of upcoming commitments and responsibilities, following up appropriately Effectively managing the president's time by reading, researching, collecting and analyzing information as needed, in advance Maintaining discretion and confidentiality. Managing information and materials of a sensitive or confidential nature Maintaining a well-organized filing system for key material sand reports (electronic and hard copy) Using excellent communication skills with good judgment Anticipating needs and delivering results consistently Displaying excellent teamwork while working with other assistants and employees Supporting other executives from time to time Assisting with other duties and responsibilities as assigned Summary of Qualifications Include: High school diploma or GED required Minimum 10 years comparable work experience required, including experience providing support to C-level executive Must pass company Support and Administrative Selection System (SASS) test Expert proficiency with Microsoft Office and Outlook Email and Calendaring; ability to design and edit graphic presentations and materials Excellent verbal and written communication and time management skills; proven ability to meet deadlines.
Make appropriate, informed decisions regarding priorities and available time Exceptional organizational skills and impeccable attention to detail Must demonstrate a commitment to performance excellence Ability to maintain a high level of integrity and discretion in handling confidential information Demonstrate a questioning attitude to continue to learn, produce results, and strengthen existing relationships Model active learning through continuing to develop breadth of knowledge, skills, and perspective Must demonstrate business acumen - have the ability to decipher priorities and make sound judgment calls High degree of professionalism and confidence in dealing with diverse groups of people, including Board members, senior executives, staff, employees, community leaders, customers and other external parties Demonstrate a team oriented and collaborative approach to work Ability to think creatively and with a sense of urgency to situations and events that require quick response or turnaround Ability to function well in a high-paced environment and switch gears at a moment's notice Must have the ability to deliver quality, accurate work within established deadlines Excellent interpersonal skills and the ability to build relationships with stakeholders, including all levels of employees, customers and external partners Exceptional teamwork skills Strong verbal and written communication skills Ability to independently prioritize workloads, meet deadlines and work in pressure situations Ability to work in a fast-paced environment, yet maintain a continued focus on the details required to perform the essential functions of the job Strong organizational skills that reflect ability to perform and prioritize multiple tasks seamlessly with excellent attention to detail Proven ability to handle a high degree of confidential information with discretion, be adaptable to various competing demands, and demonstrate the highest level of customer/client service and response Excellent customer service skills Ability to effectively build relationships and maintain positive interactions with all levels of employees Ability to work independently on special assignments as directed by management Ability to make recommendations for process improvements, as necessary Benefits, Compensation & Workforce Diversity At First Energy, employees are key to our success.
We depend on their talents to meet the challenges of our changing business environment. We are committed to rewarding individual and team efforts through our total rewards philosophy which includes competitive pay plus incentive compensation, a company-sponsored pension plan, 401(k) savings plan with matching employer contribution, a choice of medical, prescription drug, dental, vision, and life insurance programs, as well as skills development training with tuition reimbursement.
Please visit our website at to learn more about all of our employee rewards programs. First Energy proudly supports workforce diversity. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, interaction, interactionual orientation, gender identity, age, status as a protected veteran, or status as a qualified individual with a disability.
No recruiters or agencies without a previously signed contract. Unable to sponsor or transfer H-1B visas at this time. Safety Safety is a core value for First Energy and is essential to all of our business activities. We ensure employees have the tools, information, and processes to perform their duties in a manner that assures safety for themselves, their co-workers, our customers and the public. Our goals are to provide a safe work environment, to maintain an accident-free, injury-free workplace, and to promote and maintain public safety. To meet these goals, we dedicate ourselves to achieving world-class safety standards. First Energy Human Resources Team