Location: Tobyhanna, PA
Company: Vali
or the GS-11 grade level. The full performance grade level of this position is GS-11. Duties Assist the Supervisor in short- and long-range planning of construction, alteration, maintenance, and repair projects. Assign, direct, and review the work of engineering technicians and draftsmen.
Conduct extensive project studies, including written reports of findings and recommendations, for the Facility Engineering Program. Perform Contract Officer Representative functions to include attending pre-construction conferences, and furnishing technical advice and guidance on the interpretations of contract provisions. Requirements Conditions of Employment Appointment may be subject to a suitability
or fitness determination, as determined by a completed background investigation. Complete and pass a Tier 1 National Agency Check with Inquiries (NACI) background investigation.
Appointment to this position is subject to a one year probationary period unless the appointee has previously met the requirements as describedin 5 CFR Part 315. Periodic overtime and/or weekend work may be required based on specific projects and work features. Qualifications Who May Apply: US Citizens In order to qualify, you must meet the education and/or requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e. g. Peace
Corps, Ameri Corps) and other organizations (e. g. professional; philanthropic; religious; spiritual; community; student; social).
You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is. Basic Requirement for Electrical Engineer : A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
ORB. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.
Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e. g. State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2.
Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.4.
Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e. g. engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.
g. in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position at the GS-07, GS-09, or GS-11 grade levels you must also meet the qualification requirements listed below. GS-07 Additional Qualification Requirements : To qualify based on your experience, your resume must describe at least one year of experience which prepared you to do the work in this job. Specialized experience is defined as: performing basic electrical engineering duties to include assisting other engineers on assignments or projects related to the design, development, modification, fabrication, and testing of electrical equipment and systems.
This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05). OR One year of graduate-level education directly related to this position or superior academic achievement. OR Specialized experience, but less than one year; and less than one year of required education. GS-09 Additional Qualification Requirements : To qualify based on your experience, your resume must describe at least one year of experience which prepared you to do the work in this job.
Specialized experience is defined as: 1) Applying a range of standard electrical engineering principles, methods, and practices to complete projects of limited scope; and 2) exercising limited judgment in the selection of appropriate guidelines to apply to professional problems. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07). OR Two years of progressively higher level graduate education leading to a master's degree or master's or equivalent graduate degree directly related to this position.
OR Specialized experience, but less than one year; and less than two years or progressively higher level graduate education. GS-11 Additional Qualification Requirements : To qualify based on your experience, your resume must describe at least one year of experience which prepared you to do the work in this job. Specialized experience is defined as: 1) Exercising independent judgment in the application of established electrical engineering methods, procedures, and techniques to small routine projects, 2) preparing plans and specifications for electrical distribution and utilization systems, 3) monitoring engineering projects to ensure compliance with specifications; AND 4) conducting field studies of electrical equipment to evaluate functionality.
This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09). OR Three years of progressively higher level graduate education leading to a Ph. D. degree or Ph. D. or equivalent doctoral degree directly related to this position. OR Specialized experience, but less than one year; and less than three years of progressively higher level graduate education leading to a Ph.
D. degree. You will be evaluated on the basis of your level of competency in the following areas: Contracting/Procurement Electrical Engineering Planning and Evaluating Project Management How You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications above. Once the announcement has closed, a review of (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement.
If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility. You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation. Veterans and Military Spouses will be considered along with all other candidates.
Required Documents The documents you are required to submit vary based on whether or not you are eligible for preference in federal employment. A complete description of preference categories and the associated required documents is in the. As described above, your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further. 1. Your resume: Your resume may be submitted in any format and must support the specialized experience described in this announcement.
If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations and you may not be considered for this vacancy. For qualifications determinations your resume must contain hours worked per week and the dates of employment (i. e. HRS per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as incomplete and you may not receive consideration for this position.
For additional information see: 2. Other supporting documents: Cover Letter, optional Most recent Performance Appraisal, if applicable This position has an individual occupational requirement and/or allows for substitution of education for experience. If you meet this requirement based on education you MUST submit a copy of your transcript with your application package or you will be rated ineligible. See: NOTE: Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office.
Some supplemental documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove another person's personal information before you submit your application. You may be asked to provide an un-sanitized version of the documents if you are selected to confirm your eligibility. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U. S. Department of Education in order for it to be credited towards qualifications.
Therefore, provide only the attendance and/or degrees from. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. PDN-9acdcabc-dab6-44ec-82d4-0770ba17f7da
engineer in the Production Engineering Directorate, coordinating interrelated electronic/mechanical projects. Perform as the lead project engineer for a variety of engineering/weapon overhaul programs. Apply professional knowledge such as technical judgment, originality and resourcefulness, towards the design, development, testing and modification of a variety of communication-electronic systems.
Prepare repair standards, methods, and procedures for defense systems or components. Utilize computer systems to record, transfer, control and analyze data information relating to production and testing. Requirements Conditions of Employment Direct Deposit Required. Appointment may be subject
to a suitability or fitness determination, as determined by a completed background investigation. This position requires up to 25% Business Travel (TDY). Obtain and Maintain Secret Clearance.
This is an Army Acquisition, Logistics and Technology Workforce position ( Foundational). Selectee must meet position requirements for Engineering and Technical Management certification within 36 months as of entrance on duty. Appointment to this position is subject to a one year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 315. Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective
Service Registration. Qualifications Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job.
You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See for an extensive list of document requirements for all employment authorities. Interagency Career Transition Assistance Plan Priority Placement Program, Do D Military Reserve (MR) and National Guard (NG) Technician Eligible Priority Placement Program, Do D Military Spouse Preference (MSP) Eligible Priority Placement Program, Do D MR and NG Preference Eligible Tech Receiving Disability Retirement Priority Placement Program, Do D Retained Grade Preference Eligible In order to qualify, you must meet the Education and Experience requirements described below.
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e. g. Peace Corps, Ameri Corps) and other organizations (e. g. professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application.
Additional information about transcripts is. Basic Requirement for Electronics Engineer: (Must Provide Transcripts) A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.
The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.
Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e. g. State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.3.
Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.
g. engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e. g. in interdisciplinary positions. In addition to the competencies, to qualify based on your experience, your resume must describe at least one year of specialized experience which prepared you to do this work in this job.
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized experience: I have one year of specialized experience which includes 1) Providing technical oversight for engineering concepts applicable to electronic systems; AND 2) Developing standards used to evaluate plans related to the overhaul of engineering/weapon systems; AND 3) Advising supervisors and production personnel on electronic engineering designs, and development issues.
This definition of specialized experience is at the GS-11 equivalent grade/pay band in the federal service. You will be evaluated on the basis of your level of competency in the following areas: General Engineering Oral Communication Planning and Evaluating Project Management How You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications above. Once the announcement has closed, a review of (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement.
If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility. You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.
Veterans and Military Spouses will be considered along with all other candidates. Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above.
Additional information about the program is on Required Documents The documents you are required to submit vary based on whether or not you are eligible for preference in federal employment. A complete description of preference categories and the associated required documents is in the. As described above, your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply.
If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further. 1. Your resume: Your resume may be submitted in any format and must support the specialized experience described in this announcement. If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations and you may not be considered for this vacancy. For qualifications determinations your resume must contain hours worked per week and the dates of employment (i.
e. HRS per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as incomplete and you may not receive consideration for this position. For additional information see: 2. Other supporting documents: Cover Letter, optional Most recent Performance Appraisal, if applicable NOTE: Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents such as military orders and marriage certificates may contain personal information for someone other than you.
You may sanitize these documents to remove another person's personal information before you submit your application. You may be asked to provide an un-sanitized version of the documents if you are selected to confirm your eligibility. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U. S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
PDN-9ad3de8-8b53-f609f96277fa
the world. Reimagine Whats Possible We are seeking a Cryo Plant Process Engineer at our Global Headquarters in Allentown, PA or office in Houston, TX! This position requires 30% travel within the US and Canada. The Plant Process Engineering (PPE) position in the IG Americas Cryogenics team is responsible for supporting our ASU, LHY, LCO2, LHe production facilities across the Americas.
Primary responsibilities: Plant process engineering technical support to maintain safe, reliable and efficient plant operations for several ASU plants in the Americas region. Identify performance gaps, troubleshoot problems, and develop solutions to resolve plant operating issues. Interface effectively
with Operations/GEMTE technical functions and Line and Site Managers Provide technical support for developing and driving productivity improvements to meet our financial targets.
Work with controls and advanced controls functions to achieve consistent and optimum plant performance. Support Product Management, Supply Chain and Energy teams to implement operating strategies to optimize product sourcing. Support KPI development and Plant backssment activities to leverage improvement projects. Approximately 25%-30% travel expected in this position. Qualifications: B. S. in Chemical Engineering, or related field. 2-10 years experience in Engineering, Operations or related functions preferred.
Technical knowledge and experience with Cryogenic equipment, controls and processes preferred.
Strong analytical skills to evaluate problems/opportunities and drive cost-effective solutions. Effective interpersonal, communication and teamwork skills. Strong organization skills to prioritize workload. #LI-Hybrid We are the worlds largest hydrogen producer with over 80 years of industrial gas experience. We are hydrogen experts delivering safe, end-to-end solutions, investing in real, clean energy projects at scale, and driving the industry forward to generate a cleaner future. At Air Products, we work in an environment where we put safety first, diversity is essential, inclusion is our culture, and each person knows they belong and matter.
To learn more, visit About Air Products. We offer a comprehensive benefits package including paid holidays and vacation, affordable medical, dental, life insurance, retirement plans/401(k), and sick time. You will be eligible for benefits and also be 100% vested in your retirement benefits on your first day of employment. We are an Equal Opportunity Employer (U. S. ). You will receive consideration for employment without regard to race, color, religion, national origin, age, citizenship, gender, marital status, pregnancy, interactionual orientation, gender identity and expression, disability, or veteran status.
Air Products is committed to working with and providing a reasonable accommodation to individuals with disabilities. If you have a disability and you believe you need a reasonable accommodation to search for a job opening or to submit an online application, please e-mail us at xyz X@. General application status inquiries are not answered by this mailbox rather youll receive an e-mail directly from our Career Center and/or the Talent Acquisition Specialist.
world. Reimagine Whats Possible Air Products and Chemicals, Inc. a Fortune 500 manufacturer of industrial gases, has an immediate opportunity for a Senior Mechanical Engineer supporting our Process Gases at either our corporate headquarters in Allentown, Pennsylvania or in our new Buffalo, NY engineering office.
Air Products is a world-leading Industrial Gases company having both process gas applications and gasification technology that has been in operation for over 75 years. We have multiple product lines, over 750 production facilities in over 50 countries, and serve over 30 different industries, creating broad opportunities for growth and development. We pride ourselves on being
an innovative technology company that cultivates an environment of collaboration and inclusion. We need and seek out people who are dedicated and driven to create the future.
People with passion and commitment to get it right and a never-ending desire to innovate, learn, improve, and contribute. Sound like you? The Mechanical Engineering team is looking for expert candidates to support the design and fabrication of equipment including equipment in cyclic service. The team supports the design execution of our world-leading process gas facilities (e. g. hydrocarbons, helium, hydrogen, CO, ammonia) for both Air Products owned plants and those that are engineered and constructed for others.
Candidates will support the Global Operations Engineering team and will work with a diverse group of design and engineering personnel.
Principle accountabilities: Design and analysis of pressurized equipment and piping in cyclic service such as pressure swing adsorption vessels. Design and specification of static equipment such as pressure vessels and heat exchangers. Reviewing customer technical requirements and specifications and incorporating into project designs. Preparing technical specifications and conduct bid tab reviews. Providing operating plant support for the Process Gas business. This support requires interacting with Operations personnel to solve plant problems with equipment and piping.
Investigate causes of equipment failure. Develop repair methods and design changes to improve equipment reliability. Travel to supplier and operating plant sites both domestically and internationally is required. The amount of travel is normally 15%. Mentor and train junior mechanical engineers. Minimum proficiencies and qualifications: BSME or MSME required. 10+ years of professional experience performing detailed engineering and stress analysis of pressurized equipment and piping in cyclic service Strong working knowledge of design codes including ASME B31.1, B31.3, and Section VIII, Div.
1 & 2, TEMA standards and API standards. Experience with European codes and the Chinese GB code would be beneficial. Solid understanding of fatigue design of pressure components. Experience with Pressure Vessel design programs such as Compress and PV Elite is beneficial. Experience with Finite Element Analysis is a plus Experience in welding engineering and quality control is required. Experience in applying engineering principles in a field environment is beneficial. Effective communication skills and the ability to work with global team members to closure on technical issues.
If you are dedicated and driven to achieve your objectives and company goals, have passion and commitment to get it right, have a never-ending desire to learn, improve, and contribute, then come discover, care, accomplish... and thrive at Air Products! We are the worlds largest hydrogen producer with over 80 years of industrial gas experience. We are hydrogen experts delivering safe, end-to-end solutions, investing in real, clean energy projects at scale, and driving the industry forward to generate a cleaner future. At Air Products, we work in an environment where we put safety first, diversity is essential, inclusion is our culture, and each person knows they belong and matter.
To learn more, visit About Air Products. We offer a comprehensive benefits package including paid holidays and vacation, affordable medical, dental, life insurance and retirement plans. You will be eligible for benefits and also be 100% vested in your retirement benefits on your first day of employment. In New York, the expected pay range is $108,400 - $162,000 plus bonus. This is the range that we reasonably expect to pay for this position as individual compensation decisions are based on a variety of factors.
We are an Equal Opportunity Employer (U. S. ). You will receive consideration for employment without regard to race, color, religion, national origin, age, citizenship, gender, marital status, pregnancy, interactionual orientation, gender identity and expression, disability, or veteran status. Air Products is committed to working with and providing a reasonable accommodation to individuals with disabilities. If you have a disability and you believe you need a reasonable accommodation to search for a job opening or to submit an online application, please e-mail us at xyz X@.
General application status inquiries are not answered by this mailbox rather youll receive an e-mail directly from our Career Center and/or the Talent Acquisition Specialist. #INDGEM #LI-JM2 #JM
world. Reimagine Whats Possible PRINCIPAL ACCOUNTABILITIES This position is accountable for the following end results: 1. Deliver all objectives safely and achieve 100% compliance with safety requirements. 2. Develop process controls execution strategies in conjunction with overall project development team during the bid phase.
3. Produce process controls project scope of hours and cost estimates. 4. Participate in P&ID development, operability and hazard reviews and define control systems reliability, operability and availability plans as required. 5. Develop technical risk matrix, support reliability/availability studies, contribute to risk mitigation and project execution plans. 6.
Develop control equipment functional requirement. 7. Develop control system designs, architecture, programming & integration specifications and plans. 8. Support SIL backssments and verifications in line with functional safety requirements described within IEC61508 and 61511.
9. Support product development activities where the goal will be increasing competitiveness by reducing installed capital cost or optimizing the project engineering hours within the Process Controls offers. 10. Product development work may require production of design specifications including instruments, control valves, analytical analytical equipment, DCS equipment, SIS equipment and other Process Controls deliverables.
Domestic and international travel to other Air Products facilities, customer locations and plant sites is estimated to be up to 15% of the time.
MINIMUM REQUIREMENTS AND QUALIFICATIONS BS or higher in Chemical Engineering, Electrical Engineering, or a closely related field with at least 10 years of applicable work experience. Experience in Functional safety applications. Experience developing control applications with Siemens PCS7 and Step7. Additional experience with other controls platforms is a plus. Detail experience in Control and Instrumentation applications. Demonstrable technical competence, effective communication, and be a self-motivated team player with a willingness to accept responsibility.
Ability to work under pressure and be comfortable with ambiguity. Experience in Green Hydrogen, Ammonia and Electrolyzer systems would be beneficial. We are the worlds largest hydrogen producer with over 80 years of industrial gas experience. We are hydrogen experts delivering safe, end-to-end solutions, investing in real, clean energy projects at scale, and driving the industry forward to generate a cleaner future. At Air Products, we work in an environment where we put safety first, diversity is essential, inclusion is our culture, and each person knows they belong and matter.
To learn more, visit? About Air Products. We offer a comprehensive benefits package including paid holidays and vacation, affordable medical, dental, life insurance and retirement plans. You will be eligible for benefits and also be 100% vested in your retirement benefits on your first day of employment. We are an Equal Opportunity Employer (U. S. ). You will receive consideration for employment without regard to race, color, religion, national origin, age, citizenship, gender, marital status, pregnancy, interactionual orientation, gender identity and expression, disability, or veteran status.
Air Products is committed to working with and providing a reasonable accommodation to individuals with disabilities. If you have a disability and you believe you need a reasonable accommodation to search for a job opening or to submit an online application, please e-mail us at xyz X@. General application status inquiries are not answered by this mailbox rather youll receive an e-mail directly from our Career Center and/or the Talent Acquisition Specialist.
team. Collaborates with clinical, administrative, and support departments to develop appropriate methodologies to achieve project objectives. Job Duties Designs and conducts projects and programs that improve quality, cost effectiveness, and revenue generation and are in line with the Network's mission, vision, and goals.
Collaborates with other clinical, administrative, and support departments as well as with external consultants. Designs and performs analytical studies and interprets and communicates results. Provides a wide range of services related to work process flow and work redesign including analysis, design, and evaluation. Utilizes industrial engineering and management methodologies
including but not limited to, process flows, methods analysis, time studies, line balancing, capacity planning, production and inventory control, statistics, scheduling concepts, benchmarking, and simulation to analyze operations and make recommendations.
Prepares reports of findings, conclusions, and recommendations. Provides formal and informal education and training for the organization on topics such as productivity, benchmarking, activity based management, simulation, and other relevant concepts. Contributes to departmental development and operations. Minimum Qualifications Bachelor's Degree Industrial Engineering, Business Administration, Operations Research, or a related area.
1 year Improving operations and providing technical support to management.
Computer proficiency in spreadsheet, database, and word processing personal computer applications required (specifically, MS Word, Power Point, Excel, and Access). Ability to understand work processes and recognize opportunities for improving operating efficiency. Ability to work/communicate under pressure, juggling multiple commitments with poise, professionalism, and confidence to provide excellent customer service. Preferred Qualifications Master's Degree Industrial Engineering, Business Administration, Operations Research, or a related area. Training and/or experience in lean six-sigma and/or simulation Physical Demands Lift and carry 25 lbs.
frequent sitting/standing, frequent keyboard use, patient care providers may be required to perform activities specific to their role including kneeling, bending, squatting and performing CPR. Job Description Disclaimer: This position description provides the major duties/responsibilities, requirements and working conditions for the position. It is intended to be an accurate reflection of the current position, however management reserves the right to revise or change as necessary to meet organizational needs. Other responsibilities may be assigned when circumstances require.
Building services engineers Communications engineers Control and instrumentation engineers Petroleum engineers Structural engineer Truck Drivers Accounting technicians secretary/administrator Advertising copywriter Designer, fashion/clothing - So you can just drop your resume and we can see what to do for you. Email: xyz X@
and most profitable industrial gas company in the world. Reimagine Whats Possible Equipment Design & Testing Engineer Roles and Responsibilities: We have an opportunity for an Equipment Design & Testing Engineer focusing on our foods business. You will be working in our new cryogenic testing labs located at our headquarters in Allentown, PA.
The engineer develops new cryogenic freezing and chilling equipment and will enjoy the challenges of this hands-on, customer-focused role. This is a rewarding role leading a project from idea inception through commercialization. You will have the opportunity to travel to customer trials in the U. S. Travel requirement is 10-15%. Required Skills /
Abilities: Develop innovative applications / equipment using industrial gases including the use of liquid N2/CO2 for freezing and chilling or gaseous N2/CO2 for use in the processing steps.
Prepare scope, project schedule, and budget costs pertaining to development of new equipment. Lead design, fabrication and lab testing of prototypes, in collaboration with our Equipment Engineering group and external vendors. Work with Commercial Technology engineers to implement customer trials of new technology. Provide technical support for commercialized offerings. Education and Licensing Requirements: BS or MS in Mechanical Engineering Knowledge of mechanical design, thermodynamics, heat transfer,
and fluid mechanics. Experience working with equipment fabricators a plus.
Knowledge of 3D CAD system a plus Knowledge of PLC programming a plus but not required. Possess good organization, time management, teamwork, and communication skills. Strong written and verbal communication skills. #LI-Hybrid #LI-Onsite #LI-LC1 We are the worlds largest hydrogen producer with over 80 years of industrial gas experience. We are hydrogen experts delivering safe, end-to-end solutions, investing in real, clean energy projects at scale, and driving the industry forward to generate a cleaner future. At Air Products, we work in an environment where we put safety first, diversity is essential, inclusion is our culture, and each person knows they belong and matter.
To learn more, visit? About Air Products. We offer a comprehensive benefits package including paid holidays and vacation, affordable medical, dental, life insurance, retirement plans/401(k), and sick time. You will be eligible for benefits and also be 100% vested in your retirement benefits on your first day of employment. We are an Equal Opportunity Employer (U. S. ). You will receive consideration for employment without regard to race, color, religion, national origin, age, citizenship, gender, marital status, pregnancy, interactionual orientation, gender identity and expression, disability, or veteran status.
Air Products is committed to working with and providing a reasonable accommodation to individuals with disabilities. If you have a disability and you believe you need a reasonable accommodation to search for a job opening or to submit an online application, please e-mail us at xyz X@. General application status inquiries are not answered by this mailbox rather youll receive an e-mail directly from our Career Center and/or the Talent Acquisition Specialist.