Location: Kenedy, TX
Company: Wood
performance of wells, and adhering to safety protocols. Location: Kenedy, Texas Schedule: 10 Days on - 4 Days Off (12Hr days) - 10 days on / 4 days off. Please note that for this position as it is full time and long term, it is essential that candidates reside within a 50-mile radius of site.
Since this is a locally based schedule that permits returning home every night, there are no provisions for man-camps or housing per diem. If you are open to relocating or have your own travel trailer, please confirm this in your resume. Other benefits of this role include a comprehensive benefits package (including paid time off, medical, dental, vision, 401K with company match, and more). Please
note that all offers of employment are contingent on passing a drug and alcohol screening. Authorization to work lawfully in the US without sponsorship from Wood is required RESPONSIBILITIES Accessing remote locations to check wells, maintain normal operating levels, pressures and flow on separation equipment, adjusting automatic and manual controls Inspecting gas and oil wells, tanks, meters, separators, compressors, and attached piping components for leaks or unusual conditions and taking corrective actions Gauging tanks for sale or transfer of crude oil and water Operating and troubleshooting rental compressors, flowing gas wells, gas lift wells, testing wells and operation of sand traps
and flow back equipment Maintaining chemical injection rates, start up, and shut in wells Entering production data into computer databases and reviewing outputs for correctness Executing new facility walk-throughs, management of changes (MOCs), and pre-startup safety reviews (PSSRs) Regulatory work including agency testing requirements, change of status, tank & meter numbering for new facilities Updating piping & instrument diagrams (P&IDs) and site security diagrams for all new wells and facilities Responding to alarms after hours or when on call Implementing all safety, environmental, and company policies and procedures outlined in the Conoco Phillips Management System Well Monitoring and Optimization: Regularly inspect and monitor wellheads, pumping units, and related equipment.
Optimize well performance by adjusting pump speeds, volumes, and pressures as necessary. Production Maintenance: Conduct routine maintenance and repairs on production equipment to ensure continuous and safe operations. Troubleshoot and address issues related to production disruptions promptly. Data Recording and Reporting: Maintain accurate records of daily production activities, including well tests, fluid levels, and equipment readings. Generate and submit regular reports on production volumes, equipment status, and any incidents.
Safety Compliance: Adhere to all safety guidelines, protocols, and regulations to ensure a secure working environment. Participate in safety meetings and training sessions to stay updated on industry best practices. Emergency Response: Respond promptly to emergency situations, including equipment failures, leaks, or other incidents. Implement appropriate emergency procedures to mitigate risks and ensure the safety of personnel and assets. Communication: Collaborate with other team members, field personnel, and supervisors to coordinate activities and share critical information.
Report any issues, concerns, or potential improvements to the relevant authorities. Familiarity with the operation, maintenance, and troubleshooting of various equipment is crucial for an Oilfield Lease Operator/Pumper to guarantee the safe and efficient production of oil and gas. Continuous training is also necessary to stay abreast of technological advancements and industry best practices. The role of an Oilfield Lease Operator/Pumper involves working with a diverse range of equipment to monitor, maintain, and enhance oil and gas production.
The specific equipment utilized may vary depending on the well type and production methods applied, but the following is a general list commonly associated with this position: Wellhead Equipment: Christmas tree (surface wellhead equipment) Valves and chokes Tubing hangers Pumping Units: Beam pump (nodding donkey) Progressive cavity pump Electric submersible pump (ESP) Surface Pumps: Centrifugal pumps Positive displacement pumps Reciprocating pumps Fluid Separation Equipment: Separators (two-phase or three-phase) Heater-treaters Free water knockouts Storage Tanks: Production tanks Stock tanks Water disposal tanks Flowlines and Pipelines: Gathering lines Flowlines Transmission pipelines Pressure Control Equipment: Pressure relief valves Control valves Pressure regulators Measurement Devices: Flow meters Pressure gauges Level indicators Safety Equipment: Gas detectors Fire extinguishers Personal protective equipment (PPE) Communication Tools: Two-way radios SCADA (Supervisory Control and Data Acquisition) systems Tools and Instrumentation: Wrenches, pliers, and other hand tools Multimeters and other diagnostic instruments Vehicles: Pickup trucks Off-road vehicles for accessing remote well sites QUALIFICATIONS Current and valid driver's license 1+ year direct experience requiring mechanical skills, including but not limited to: Use, maintenance and repair of mechanical equipment General tasks requiring physical operation of equipment and machinery Performing inspection of equipment and machinery Willing and able to perform/align with following (with or without reasonable accommodation): Work in temperature extremes or adverse weather conditions Work in several different geographic locations throughout a single workday Work both in and out of a provided vehicle Wear appropriate special safety equipment Climb heights up to 24 feet to gauge tanks Walk, bend, stoop, lift, push, and pull Use hand tools to make minor repairs Work weekends and be on call Preferred Skills and Experience: Associate degree/Trade certification or higher in Production Technology, Process Technology, or other related technical field or foreign equivalent 1+ year direct experience in an environment prioritizing Health, Safety and Environment 1+ years direct experience with oil and gas production practices, equipment, and terminology Ability to use computers and input data in a timely manner Ability to react to visual and hearing signals, alarms, and instructions Able to meet the clean driving insurability standard requirements to drive a provided vehicle, which means a driving record that is clear of any of serious traffic violations Takes ownership of actions and follows through on commitments Works well with others to meet safety, environment, and production targets Delivers positive results through realistic planning to accomplish goals Builds effective solutions based on available information and makes timely decisions that are safe and ethical
Are you always solving? Then we’d like to meet you and bet you’d like to meet us. Ashland LLC has an exciting opportunity for a Process Engineer to join our team at our Kenedy, TX location. This is a very visible, significant role within the Company and the Engineering function.
This position will report to Plant Manager. The responsibilities of the position include, but are not limited to, the following: Assist in improving product quality and process efficiency through technical studies and experimentation Improve process operations by providing technical support and process troubleshooting Develop process designs and procedures for new products Provide accurate and detailed reports
for tests conducted Assist in reviewing process designs and procedures to ensure safe and environmentally sound operation of the facility Provide programming assistance for the process control computers in the plant Understand and comply with plant safety and environmental policies.
Report all safety, environmental and quality risks and hazards and chemical releases Complete all activities in accordance with good manufacturing practices Lead the facility’s continuous improvement program focusing on implementation of Lean manufacturing practices including 5S, visual management, Lean Six Sigma projects, and operations alignment In order to be qualified for this role, you must possess
the following: B. S. in Engineering or a related engineering degree Good written and oral communication skills are required The following skill sets are preferred by the business unit: B.
S. in Chemical Engineering Knowledge in programming PLCs and ladder logic. Knowledge of lean manufacturing techniques Polymer chemistry Bulk powder handling expertise In more than 100 countries, the people of Ashland LLC. (NYSE: ASH) provide the specialty chemicals, technologies and insights to help customers create new and improved products for today and sustainable solutions for tomorrow. Our chemistry is at work every day in a wide variety of markets and applications, including architectural coatings, automotive, construction, energy, personal care and medical.
Visit to see the innovations we offer. At Ashland our vision is to be a leading, global specialty chemicals company whose inspired and engaged employees add value to all we touch. In fact our people, employees, customers and vendors define who we are. They are the driving force behind everything we do. Not only do we value our customers but we value our employees, and we work to offer them a dynamic and challenging environment. We hold ourselves to high standards at Ashland, and we value integrity and honesty.
Ashland has a history of attracting the best people and keeping them. The reasons are simple: industry competitive salary and benefits, pay-for-performance incentive plans and a diverse work environment where employees feel challenged and valued. People come to Ashland and stay. As a growing Fortune 500 specialty chemicals company, we offer opportunities for development and advancement throughout our global organization. Our values define who we are and what we care about as a company. If you are looking for a relationship with a company instead of simply a job, this may be a great fit.
Ashland is proud to be an Equal Opportunity Employer Minorities/Women/Veterans/Disabled/Gender Identity/interactionual Orientation. All qualified applicants will receive consideration for employment without regard to race, color, religion, interaction, gender identity, interactionual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability. NOTE: We do not accept resumes from external staffing agencies or independent recruiters for any of our openings unless we have a signed recruiting agreement in place to fill a specific position.
performance of wells, and adhering to safety protocols. Location: Refugio, TXSchedule: Monday-Friday Other benefits of this role include a company truck and gas card, comprehensive benefits package (including paid time off, medical, dental, vision, 401K with company match, and more).
Please note that all offers of employment are contingent on passing a drug and alcohol screening. Authorization to work lawfully in the US without sponsorship from Wood is required. RESPONSIBILITIES Well Monitoring and Optimization: Regularly inspect and monitor wellheads, pumping units, and related equipment. Optimize well performance by adjusting pump speeds, volumes, and pressures as necessary. Production
Maintenance: Conduct routine maintenance and repairs on production equipment to ensure continuous and safe operations. Troubleshoot and address issues related to production disruptions promptly.
Data Recording and Reporting: Maintain accurate records of daily production activities, including well tests, fluid levels, and equipment readings. Generate and submit regular reports on production volumes, equipment status, and any incidents. Safety Compliance: Adhere to all safety guidelines, protocols, and regulations to ensure a secure working environment. Participate in safety meetings and training sessions to stay updated on industry best practices. Emergency Response: Respond promptly
to emergency situations, including equipment failures, leaks, or other incidents.
Implement appropriate emergency procedures to mitigate risks and ensure the safety of personnel and assets. Communication: Collaborate with other team members, field personnel, and supervisors to coordinate activities and share critical information. Report any issues, concerns, or potential improvements to the relevant authorities. Familiarity with the operation, maintenance, and troubleshooting of various equipment is crucial for an Oilfield Lease Operator/Pumper to guarantee the safe and efficient production of oil and gas. Continuous training is also necessary to stay abreast of technological advancements and industry best practices.
The role of an Oilfield Lease Operator/Pumper involves working with a diverse range of equipment to monitor, maintain, and enhance oil and gas production. The specific equipment utilized may vary depending on the well type and production methods applied, but the following is a general list commonly associated with this position: Wellhead Equipment: Christmas tree (surface wellhead equipment) Valves and chokes Tubing hangers Pumping Units: Beam pump (nodding donkey) Progressive cavity pump Electric submersible pump (ESP)Surface Pumps: Centrifugal pumps Positive displacement pumps Reciprocating pumps Fluid Separation Equipment: Separators (two-phase or three-phase) Heater-treaters Free water knockouts Storage Tanks: Production tanks Stock tanks Water disposal tanks Flowlines and Pipelines: Gathering lines Flowlines Transmission pipelines Pressure Control Equipment: Pressure relief valves Control valves Pressure regulators Measurement Devices: Flow meters Pressure gauges Level indicators Safety Equipment: Gas detectors Fire extinguishers Personal protective equipment (PPE)Communication Tools: Two-way radios SCADA (Supervisory Control and Data Acquisition) systems Tools and Instrumentation: Wrenches, pliers, and other hand tools Multimeters and other diagnostic instruments Vehicles: Pickup trucks Off-road vehicles for accessing remote well sites QUALIFICATIONS High school diploma or equivalent; post-secondary education in a related field is an asset 2-5 years of experience in oilfield operations, preferably as a Lease Operator Strong mechanical aptitude and troubleshooting skills Knowledge of oil and gas production equipment and processes Ability to work well in a team environment and communicate effectively with other operators, supervisors, and management Good organizational skills and attention to detail Ability to work in a fast-paced environment and handle multiple tasks simultaneously.
Willingness to work flexible hours and be on-call as required Valid driver's license and ability to pass a background check and drug test Physical Requirements: Ability to lift up to 50 pounds Ability to work in outdoor environments in various weather conditions Ability to climb ladders and stairs and work at heights Ability to work in confined spaces and wear personal protective equipment as required
Engineer for our North Texas operation. This position will be a key hire to help grow our Traffic Engineering practice. The Senior Project Manager/ Traffic Engineer will be involved in a variety of projects, including but not limited to existing condition and traffic surveys, traffic studies and traffic impact study review, feasibility analysis, schematic design, traffic engineering computation including capacity and level of service analysis, corridor studies, transportation and micro-simulation modeling, final plans, specifications and cost estimates, and construction oversight.
Required Qualifications : Degree in engineering, planning or related field. PE License in Texas (or ability
to acquire this within 3 months). 12 or more years of progressive experience in traffic engineering. Expertise using engineering software, manuals and methodologies required for above projects.
Demonstrated success in managing projects to scope, schedule, and budget. Desired Qualifications : 12 or more years' experience performing projects similar to those listed above with minimum 5 years in a project management role. Proven track record of success in business development. Strong team-building and team management skills. Experience using SYNCHRO, VISSIM and similar modeling software. Experience with Microstation or other CAD software. Tx DOT precertification in applicable categories. Equal Opportunity Employer Veterans Disabled
has a direct impact on Capex Spend of $5MM average per year. Incumbent will ensure that projects are delivered in accordance with regulatory controls, Pepsi Co policies and standards. Responsibilities Lead individual projects and site initiatives to ensure timely implementation of the site Engineering & Capital Project Portfolio.
Work closely with the Site Engineering and Leadership teams to ensure successful completion and handover of projects Lead & support Project teams to ensure safe & effective execution of each phase of project implementation and provide technical support to project teams in order to ensure technically best practice solutions. Ensure all engineering Projects
are designed and executed in accordance with best practice project management principles, from concept to completion including business case preparation, analysis and delivery.
Create Efficiency: Responsible for management of project budgets, ensuring costs are controlled and efficiencies optimized. Leadership Team Accountabilities: Demonstrate project leadership, interpersonal skills and effective communication. Influence management decisions to implement optimum solutions. Drive Future Success: Adhere to all Pepsi Co Health & Safety Requirements. Compensation & Benefits: The expected compensation range for this position is between $61,700 - $103,250 based on a full-time schedule
Location, confirmed job-related skills and experience will be considered in setting actual starting salary Bonus based on performance and eligibility; target payout is 5% of annual salary paid out annually Paid time off subject to eligibility, including paid parental leave, vacation, sick, and bereavement In addition to salary, Pepsi Co offers a comprehensive benefits package to support our employees and their families, subject to elections and eligibility: Medical, Dental, Vision, Disability, Health and Dependent Care Reimbursement Accounts, Employee Assistance Program (EAP), Insurance (Accident, Group Legal, Life), Defined Contribution Retirement Plan Qualifications Bachelor's Degree in Chemical, Process or Mechanical Engineering (alternative qualifications to degree level will be considered depending on experience).
5+ years experience in engineering with extensive capital project management experience. Extensive experience of: Process plant technical standards & regulatory compliance requirements. Project management standards, safety systems, project & construction safety, process & operational hazard backssment, process automation. Capital procurement, contract development, supplier negotiation & development. Mechanical Design and Auto Cad Drafting Knowledge of & capability in process improvement, lean six sigma tools would be advantageous.
Excellent interpersonal & communication skills; proficient communication skills with the ability to effectively interact with, motivate & actualize employees at all levels of the organization in an international arena. Ability to analyze & process high volumes of information, manage multiple priorities in a timely manner; with precise attention to detail; a high degree of accuracy & extensive problem solving experience. Proven ability to translate complex projects to succinct business messages, gaining engagement and endorsement from business stakeholders.
Previous experience and knowledge of equipment used in the food and beverage industry to include: Packaging, Filling, Batching, CIP, Liquids and Dry Material handling, Plant Utilities Experience working with local government and regulatory agencies EEO Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, interaction, interactionual orientation, gender identity, national origin, protected veteran status, or disability status. Pepsi Co is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / interactionual Orientation / Gender Identity If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law & EEO is the Law Supplement documents.
View Pepsi Co EEO Policy. Please view our Pay Transparency Statement
Define Do D cybersecurity and anti-tamper requirements and interact with external stakeholders to refine/derive/allocate security control requirements. Perform trades studies, cost analysis, risk backssments, impact analysis, and effectiveness studies.
Customize cybersecurity solutions based on cost and effectiveness. Assist programs and monitor program execution throughout product development lifecycle to ensure cyber and anti-tamper objectives are met. Lead, advise, and educate engineers on cybersecurity and anti-tamper concepts and solutions. Prepare briefings to obtain approvals by government agencies for contracted efforts. Perform cybersecurity tasks in each phase of the Risk Management
Framework (RMF). Create entire authorization packages to obtain an Authority to Operate (ATO) for Do D Information Systems. Interact with System Program Office and Authorizing Official key personnel during all phases of the RMF.
Support Information System Security Managers and Officers (ISSM/ISSO) during Continuous Monitoring Phase of the RMF as technical Subject Matter Expert. Applies current systems security engineering methods, practices and technologies to the architecture, design, development, evaluation and integration of systems and networks to maintain system security. Works closely with Government customers to ensure that the security protection needs, concerns and requirements
are defined and implemented with appropriate fidelity early and in a sustainable manner throughout the life cycle of system that will allow for the security authorization of the system of interest.
Works with systems developers or commercial product vendors in the design and evaluation of state-of-the-art secure systems, networks, and database products. Uses methods such as encryption technology, vulnerability analysis and security management. Responsible for integration of multiple methods into a cohesive system security perimeter and environment and the policies and procedures necessary to monitor and maintain such an environment. Will prepare Certification and Accreditation documentation, using multiple standards such as DITSCAP, NIACAP, DCID 6/3, Common Criteria, and NIST 800-37, to achieve security authorization of supported systems.
Represents program security needs, concerns and requirements at customer meetings. The ideal candidate will have: Bachelor's degree in a technical field, such as Cybersecurity, Electrical Engineering, Systems Engineering, or Computer Science. CISSP/CASP+ Required. Required Do D Secret Security clearance. Possess an active IASAE level II or III certification in accordance with Do DD 8140.01, Cybersecurity Workforce Management and Do D 8570.01-M, Information Assurance Workforce Improvement Certification.
6+ years of relevant experience in the fields of cybersecurity, anti-tamper, or engineering computer technology. Defense industry experience. Experience creating authorization packages for Do D Information Systems. Experience implementing security controls. Experience with security control testing to include use of vulnerability and compliance scanners, creating test reports, and analyzing test results. In-depth knowledge of all phases of the RMF. Knowledge of all phases of the Systems Development Lifecycle.
Knowledge of NIST 800-53 security controls including their implementation and testing. Interpersonal soft skills to effectively and smoothly interact with both internal and external stakeholders. Experience in requirements management to include deriving, allocating, and tracing. Ability to work alone or in a team environment. Self-motivated with substantial problem-solving abilities. Proficiency with Microsoft Office products. JSIG compliance and implementation experience. Proficiency in anti-tamper techniques for verification and protection of Critical Program Information (CPI) per Do DI 5200.39.
Systems Administrator Experience. Significant knowledge of Security Technical Implementation Guides (STIGs). Design and Architect experience of cybersecurity solutions. Multiple Do D 8570.01-M certifications. Prior experience utilizing systems engineering principles for requirements on a technical effort. Previous experience developing and accessing various artifacts such as SOWs, requirements, and test documents. Experience with DOORS requirements management software. Experience in e MASS and Xacta RMF flow software. Experience in cybersecurity activities associated with aircraft and aircraft simulators/training devices.
Ability to travel up to 15%. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. We are currently interviewing to fill this and other similar positions. If this role is not a fit for you, we do offer a referral bonus program for referrals that we successfully place with our clients, subject to program guidelines. ASK ME HOW. Thank you! Naval Sisodia Lead Recruitment (218) 319-xyz X PAY RANGE AND BENEFITS: Pay Range: $70-$80 per hour.
Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Benefits: Innova Solutions offers benefits( based on eligibility) that include the following: Medical & shop coverage, Dental/vision insurance, 401(k), Health saving account (HSA) and Flexible spending account (FSA), Life Insurance, Pet Insurance, Short term and Long term Disability, Accident & Critical illness coverage, Pre-paid legal & ID theft protection, Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP).
ABOUT INNOVA SOLUTIONS: Founded in 1998 and headquartered in Atlanta, Georgia, Innova Solutions employs approximately 50,000 professionals worldwide and reports an annual revenue approaching $3 Billion. Through our global delivery centers across North America, Asia, and Europe, we deliver strategic technology and business transformation solutions to our clients, enabling them to operate as leaders within their fields. Recent Recognitions: One of Largest IT Consulting Staffing firms in the USA - Recognized as #4 by Staffing Industry Analysts (SIA 2022) Clearly Rated Client Diamond Award Winner (2020) One of the Largest Certified MBE Companies in the NMSDC Network (2022) Advanced Tier Services partner with AWS and Gold with MS Website : / Innova Solutions is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment.
Innova Solutions is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, interaction, age, physical or mental disability, veteran status, marital status, domestic partner status, interactionual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates.
If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please contact us at or (770) 493-xyz X. Please indicate the specifics of the assistance needed. Innova Solutions encourages all interested and qualified candidates to apply for employment opportunities. Innova Solutions (Hire Genics/Volt) does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.
S. C. 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws. American Cybersystems, Inc is acting as an Employment Business in relation to this vacancy. PDN-9ac9aaf5-a895-49f5-8c95-1c3a81c13eab
