Location: Kentwood, MI
Company: Nutra Food Ingredients
operations with minimal guidance. Establish and maintain good technique with regards to working in classified areas (including gowning qualification). Perform QA review in-process, environmental monitoring test results, and material release for incoming materials.
Provide review and input on Supplier Quality Agreements and other quality related documents, including SOP creation and revision. Responsible for the implementation, maintenance, and monitoring of food safety and quality programs at the facility. Ensuring that the programs are not only compliant with regulations/certifications but also sustainable for operations. This includes, but not limited to: programs supporting FDA requirements
(FMSA & FSVP), Global Food Safety Initiative, Sustainability, Kosher, HALAL, and Non-GMO. Responsible for monitoring food safety and quality throughout the distribution & manufacturing processes, which may include but is not limited to: trending product data, ensuring testing equipment is functioning properly, and sending out samples for third party analysis.
Assist with food safety and quality audits/inspections. These include but are not limited to: state/federal inspections, SQF, Non-GMO, Kosher, and Halal. Foster a food safety and food quality culture through open communication and education with staff. Responsible for onsite food safety and food quality training for team members.
Assist with the site execution of prerequisite program verification and monitoring.
This will include but is not limited to coordinating foreign material verifications, pest control monitoring, supplier management, calibrations, and recall. Work with the onsite team to investigate and create preventative action based on quality events/customer concerns. Assist with the investigation, root cause analysis and resolution of customer quality issues. Implement corrective actions as necessary. Helps support and ensure compliance with company Safety/Environmental/Quality/HR program policies and procedures. Conforms with and abides by all regulations, policies, work procedures, instruction, and all safety requirements.
Provides a “Customer Service” attitude when interacting with internal and external customers while accomplishing work, production, and achieving quality standards. Maintains a clean, orderly, and safe workstation/environment at all times. Other duties as assigned. This position has no supervisory responsibilities. Qualifications/Requirements include: Undergraduate Degree in Life Sciences or related field 2-5 years related work experience PCQI certification, or the ability to obtain certification within first 6 months after hire Ability to interpret and relate quality standards for implementation and review Ability to work independently Ability to find information or answers to problems or challenges as needed Accuracy and attention to detail Exceptional communications skills Meets project deadlines on time Ability to handle and work through ambiguity Proficient computer skills in Microsoft Word, Excel and Outlook Proficient in mathematics Maintain good attendance habits Exhibit a professional manner in dealing with other department managers, working to maintain constructive working relationships under all circumstances Abide by all relevant SOPs as per Company policy as they are related to the position Abide by the company’s safety, quality, environmental, and HR policies at all times Must be able to comply with GMP requirements Previous experience in an ISO 22000 environment a plus Professionalism and self-motivation to provide excellent customer service Pay rate based upon candidate's level of experience Other benefits include: A growing company with a family feel A variety of affordable benefit options (Medical, Dental, Vision, etc.
) Paid Time Off and Holiday Pay 401(k) Nutra Food Ingredients, LLC is a professional ingredient supplier for the Nutrition, medical and Food & Beverage industries since 2004.
Our goal is to always supply the highest-quality ingredients to our customers, and to satisfy the end user’s needs to a quality healthy life. We specialize in: Collagen, Gelatin, Collagen Protein Peptides, Bovine Bone Broth, Veggie Protein, Polyol Sweeteners such as Xylitol, Erythritol, Maltitol and Sorbitol, Fiber Ingredients such as; Inulin, Pea and Soy Fiber, and an array of Intensive Sweeteners. The majority of ingredients are offered in both conventional and/or USDA/NOP certified Organic versions, as well as Gluten-Free and NON GMO Project Verified.
As a trusted supplier to the medical, Nutraceutical and Food & Beverage industries, we customize our products to meet customer specifications. We guarantee the highest level of quality, always consistent materials and the most competitive price for our clients. With so many distribution points and key ties to manufacturing around the world, we ensure on-time delivery to our customers. Our offices and warehouses are located in Grand Rapids, Michigan; Santa Fe Springs & Carson, California; Edison, New Jersey; Bolingbrook, IL; and Montreal, Canada.
We have experience in supporting: Nutritional Bar Manufacturers, Cosmetic Manufacturers, Food and Beverage Processors, medical and Supplement Processors, and many more.
improvements, qualify and conduct vendor management, generate and maintain DMR's, product specifications, design control files, and CE technical files. MAJOR RESPONSIBILITIES: Manage the development and implementation of methods and procedures for process control, process validation, process improvement, testing, and inspection to ensure that products are ideal and functional.
Design experiments to understand sources of variation affecting products and processes. Applies statistical process control (SPC) methods for analyzing data to evaluate the current process and process changes. Design and perform experimental product testing and analysis to maintain quality levels and minimize defects
and failure rates. Generate and analyze reports and defective products to determine trends and lead corrective actions. Use concepts of probability and statistical quality control to guide decisions.
Direct and collaborate with supplier representatives on quality problems, ensure corrective action implementation (CAPA, SCAR), and contribute to supplier quality improvement programs. Lead supplier qualifications. Provide Quality expertise in Product Development, Design Control activities, Risk Management, and CE Technical Files. Responsible for building appropriate product documentation (e. g. Device Master Records) in compliance with applicable regulations. Work with Regulatory Groups
and Suppliers to produce 510K submissions, letters to file, etc.
as required. Coordinate product testing with internal and external laboratories as required. Ensure compliance with domestic and international regulations associated with product lines and processes. Perform quality reviews of design documentation for compliance with stated requirements, including vendor quality documents and company quality records. Lead investigations of product and process non-conformances and out-of-specification results and develop effective corrective and preventive actions (CAPA). COVID-19 Vaccination Please be aware that Medline requires all employees starting in this position to be fully vaccinated against COVID-19.
This position will require the successful candidate to provide proof that they are fully vaccinated by their start date. Medline is an equal opportunity employer, and will provide reasonable accommodations to those individuals who are unable to be vaccinated for COVID-19 consistent with federal, state, and local law. Education Typically requires a Bachelor's degree in Engineering, Science, Math or other related technical field. Work Experience At least 2 years of experience in the Quality or Engineering. Knowledge / Skills / Abilities Experience developing ways of accomplishing goals with little or no supervision, depending on oneself to complete objectives, and determining when escalation of issues is necessary.
Experience using time management skills to prioritize, organize, and track details in order to meet deadlines of multiple projects. Experience problem solving, overcoming obstacles, and reaching a positive and successful solution through mathematical or systematic operations. Experience using MS Office Suite products (Word, Excel, Power Point, Outlook ). Intermediate Skill Level in Microsoft Excel (for example: conditional formatting, tables, formulas, charting) Working knowledge of government and industry quality assurance codes and standards (e.
g. 21 CFR 820, ISO13485). Position requires up to 15% travel. PREFERRED JOB REQUIREMENTS At least 2 years of industry experience in Medical Devices, Drugs, and/or fields directly related to the role.
bills of material, specifications, etc. ) in order to: Identify and resolve issues affecting product configuration Identify and assign rework actions necessary to rework production product Accept production product work-in-process and approve for next assigned operation Skills : Candidates must be able to work in a self directed manner in a fast-paced working environment Foster and maintain professional and productive relationships with other staff and management Possess excellent verbal and written communication skills Demonstrate proficiency in computer based applications Have experience with electronic assembly including; SMT, T/H & Mechanical Ability to effectively operate visual magnification
devices (scope) Ability to effectively operate and interpret basic electronic measuring devices Ability to effectively operate and interpret basic mechanical measuring devices Qualifications : High school diploma or equivalent required, some college preferred Basic math skills required Acceptable visual acuity and eye-hand coordination Must have, or be able to acquire, operator certification for IPC-A-610 Must have, or be able to acquire, operator certification for J-STD-001 Ability to review and interpret technical data packages for electronic assemblies Physical Demands : While performing these duties, the employee is required to sit or stand for extended periods of time, reach with hand and
arm, and talk or hear.
Employee may be required to lift up to 50 pounds.
This position may require exposure to information which is subject to US export control regulations, i. e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All applicants must be U. S. persons within the meaning of U. S. regulations. Job Posted by Applicant Pro
infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place.
Differentiated by the quality of our people and our relentless drive to deliver the most successful outcomes, we align our capabilities to our customers’ objectives to create a lasting positive impact.
We serve the Infrastructure; Nuclear, Security & Environmental; Energy; Mining & Metals, and the Manufacturing and Technology markets. Our services span from initial planning and investment, through start-up and operations. Core to Bechtel is our values – ethics, safety, quality, people, culture, relationships, innovation and sustainability, and our covenants – integrity,
respect, collaboration, trust, and delivery. They are what we believe, what customers can expect, and how we deliver. Project Overview: Bechtel Manufacturing & Technology, Inc.
offers engineering, procurement, and construction services for customers in the semiconductor manufacturing, electric vehicle, and data center markets. Headquartered in Reston, Virginia, the M&T global business unit also includes colleagues working in Arizona, Ohio, Texas, India, and additional project locations around the world. Location : Owner facility in Kingston, Georgia, USA Responsibilities: Mechanical QA/QC Consultant Engineer is responsible for establishing, developing, and implementing QA/QC roles while
working with the Mechanical department including, but not limited to the following: Ensuring compliance with codes and regulations Managing all the required quality procedures (ITP, WPS and PQR etc.
) Conducting the inspection Recording all the inspection and test reports by log tracking. Assisting the Contractor by advising in terms of approval of Subcontractor's quality assurance activities Conducting the regular quality audit in conformance with quality assurance program and quality control plan and issuing NCR or CAR Qualifications and Skills: Basic Qualifications: A bachelor’s degree in a university or its equivalent in a Mechanical engineering. A minimum of Ten (10) years of total experience in relevant field for Mechanical QA/QC Consultant Engineer.
Additional Qualifications: Preferred ability in English and shall be good enough for both oral and written. Support the team with all QA/QC activities related Mechanical Works. Support and report to his/her Managers for his/her all roles & responsibilities related to QA/QC works. Coordination work with Construction Department and Design Department to achieve good quality of work. Addendum: Level 1 : B. S. in Mechanical Engineering and a minimum of 10 years related experience. Level 2 : B.
S. in Mechanical Engineering and a minimum of 15 years related experience. #LI-AM3 Shaping tomorrow together Bechtel is one of the most respected global engineering, construction, and project management companies. Together with our customers, we deliver landmark projects that foster long-term progress and economic growth. Since 1898, we’ve completed more than 25,000 extraordinary projects across 160 countries on all seven continents. We operate through five global businesses: Infrastructure; Nuclear, Security & Environmental; Energy; Mining & Metals; and Manufacturing & Technology. Our company and our culture are built on more than a century of leadership and a relentless adherence to our values, the core of which are safety, quality, ethics, and integrity.
These values are what we believe, what we expect, what we deliver, and what we live. Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, interaction, interactionual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law.
Bechtel employees are required to be vaccinated for COVID-19 or show proof of a negative test result prior to accessing Bechtel sites/facilities to the extent required by applicable law or by customer requirements.
improvements, qualify and conduct vendor management, generate and maintain DMR's, product specifications, design control files, and CE technical files. MAJOR RESPONSIBILITIES: Manage the development and implementation of methods and procedures for process control, process validation, process improvement, testing, and inspection to ensure that products are ideal and functional.
Design experiments to understand sources of variation affecting products and processes. Applies statistical process control (SPC) methods for analyzing data to evaluate the current process and process changes. Design and perform experimental product testing and analysis to maintain quality levels and minimize defects
and failure rates. Generate and analyze reports and defective products to determine trends and lead corrective actions. Use concepts of probability and statistical quality control to guide decisions.
Direct and collaborate with supplier representatives on quality problems, ensure corrective action implementation (CAPA, SCAR), and contribute to supplier quality improvement programs. Lead supplier qualifications. Provide Quality expertise in Product Development, Design Control activities, Risk Management, and CE Technical Files. Responsible for building appropriate product documentation (e. g. Device Master Records) in compliance with applicable regulations. Work with Regulatory Groups
and Suppliers to produce 510K submissions, letters to file, etc.
as required. Coordinate product testing with internal and external laboratories as required. Ensure compliance with domestic and international regulations associated with product lines and processes. Perform quality reviews of design documentation for compliance with stated requirements, including vendor quality documents and company quality records. Lead investigations of product and process non-conformances and out-of-specification results and develop effective corrective and preventive actions (CAPA). COVID-19 Vaccination Please be aware that Medline requires all employees starting in this position to be fully vaccinated against COVID-19.
This position will require the successful candidate to provide proof that they are fully vaccinated by their start date. Medline is an equal opportunity employer, and will provide reasonable accommodations to those individuals who are unable to be vaccinated for COVID-19 consistent with federal, state, and local law. Education Typically requires a Bachelor's degree in Engineering, Science, Math or other related technical field. Work Experience At least 2 years of experience in the Quality or Engineering. Knowledge / Skills / Abilities Experience developing ways of accomplishing goals with little or no supervision, depending on oneself to complete objectives, and determining when escalation of issues is necessary.
Experience using time management skills to prioritize, organize, and track details in order to meet deadlines of multiple projects. Experience problem solving, overcoming obstacles, and reaching a positive and successful solution through mathematical or systematic operations. Experience using MS Office Suite products (Word, Excel, Power Point, Outlook ). Intermediate Skill Level in Microsoft Excel (for example: conditional formatting, tables, formulas, charting) Working knowledge of government and industry quality assurance codes and standards (e.
g. 21 CFR 820, ISO13485). Position requires up to 15% travel. PREFERRED JOB REQUIREMENTS At least 2 years of industry experience in Medical Devices, Drugs, and/or fields directly related to the role.
bills of material, specifications, etc. ) in order to: Identify and resolve issues affecting product configuration Identify and assign rework actions necessary to rework production product Accept production product work-in-process and approve for next assigned operation Skills : Candidates must be able to work in a self directed manner in a fast-paced working environment Foster and maintain professional and productive relationships with other staff and management Possess excellent verbal and written communication skills Demonstrate proficiency in computer based applications Have experience with electronic assembly including; SMT, T/H & Mechanical Ability to effectively operate visual magnification
devices (scope) Ability to effectively operate and interpret basic electronic measuring devices Ability to effectively operate and interpret basic mechanical measuring devices Qualifications : High school diploma or equivalent required, some college preferred Basic math skills required Acceptable visual acuity and eye-hand coordination Must have, or be able to acquire, operator certification for IPC-A-610 Must have, or be able to acquire, operator certification for J-STD-001 Ability to review and interpret technical data packages for electronic assemblies Physical Demands : While performing these duties, the employee is required to sit or stand for extended periods of time, reach with hand and
arm, and talk or hear.
Employee may be required to lift up to 50 pounds.
This position may require exposure to information which is subject to US export control regulations, i. e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All applicants must be U. S. persons within the meaning of U. S. regulations. Job Posted by Applicant Pro
infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place.
Differentiated by the quality of our people and our relentless drive to deliver the most successful outcomes, we align our capabilities to our customers’ objectives to create a lasting positive impact.
We serve the Infrastructure; Nuclear, Security & Environmental; Energy; Mining & Metals, and the Manufacturing and Technology markets. Our services span from initial planning and investment, through start-up and operations. Core to Bechtel is our values – ethics, safety, quality, people, culture, relationships, innovation and sustainability, and our covenants – integrity,
respect, collaboration, trust, and delivery. They are what we believe, what customers can expect, and how we deliver. Project Overview: Bechtel Manufacturing & Technology, Inc.
offers engineering, procurement, and construction services for customers in the semiconductor manufacturing, electric vehicle, and data center markets. Headquartered in Reston, Virginia, the M&T global business unit also includes colleagues working in Arizona, Ohio, Texas, India, and additional project locations around the world. Location : Owner facility in Kingston, Georgia, USA Responsibilities: Mechanical QA/QC Consultant Engineer is responsible for establishing, developing, and implementing QA/QC roles while
working with the Mechanical department including, but not limited to the following: Ensuring compliance with codes and regulations Managing all the required quality procedures (ITP, WPS and PQR etc.
) Conducting the inspection Recording all the inspection and test reports by log tracking. Assisting the Contractor by advising in terms of approval of Subcontractor's quality assurance activities Conducting the regular quality audit in conformance with quality assurance program and quality control plan and issuing NCR or CAR Qualifications and Skills: Basic Qualifications: A bachelor’s degree in a university or its equivalent in a Mechanical engineering. A minimum of Ten (10) years of total experience in relevant field for Mechanical QA/QC Consultant Engineer.
Additional Qualifications: Preferred ability in English and shall be good enough for both oral and written. Support the team with all QA/QC activities related Mechanical Works. Support and report to his/her Managers for his/her all roles & responsibilities related to QA/QC works. Coordination work with Construction Department and Design Department to achieve good quality of work. Addendum: Level 1 : B. S. in Mechanical Engineering and a minimum of 10 years related experience. Level 2 : B.
S. in Mechanical Engineering and a minimum of 15 years related experience. #LI-AM3 Shaping tomorrow together Bechtel is one of the most respected global engineering, construction, and project management companies. Together with our customers, we deliver landmark projects that foster long-term progress and economic growth. Since 1898, we’ve completed more than 25,000 extraordinary projects across 160 countries on all seven continents. We operate through five global businesses: Infrastructure; Nuclear, Security & Environmental; Energy; Mining & Metals; and Manufacturing & Technology. Our company and our culture are built on more than a century of leadership and a relentless adherence to our values, the core of which are safety, quality, ethics, and integrity.
These values are what we believe, what we expect, what we deliver, and what we live. Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, interaction, interactionual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law.
Bechtel employees are required to be vaccinated for COVID-19 or show proof of a negative test result prior to accessing Bechtel sites/facilities to the extent required by applicable law or by customer requirements.
development. This role will report to the Senior Vice President of Quality Control and Analytical Development. Responsibilities Manage analytical method development, characterization and Quality Control testing at contract testing labs and CDMOs Develop phase-appropriate methods for drug substance/drug product characterization and release testing, including qualification and validation activities Oversee stability studies and comparability programs Author or review study protocols and reports Work with Quality Assurance to help build and maintain a robust QC infrastructure Execute strategies for moving products from early to late stage and commercial development Work closely with Manufacturing
& Development partners within Apogee Tech Ops, as well as external stakeholders, to execute analytical development and Quality Control activities according to program needs Required Skills Advanced degree in a relevant discipline (e.
g. analytical chemistry, biochemistry or related field) 10+ years of analytical development & quality control experience with complex biologics spanning early and late-stage development Expertise/competence in several relevant analytical techniques such as HPLC, spectrophotometry, mass spec, ELISA, and cell-based bioassays Excellent communication skills with an ability to collaborate effectively across functional lines Ability to work independently and
multi-task in a fast-moving organization Availability to participate in calls across multiple international time zones Successfully exhibit Apogee's C.
O. R. E. values: Caring, Original, Resilient and Egoless Ability and willingness to travel up to 25%
performing team that designs, develops, implements, and maintains applications using the latest tools, technologies, and techniques Help our customers enhance their analytic capabilities and the way they integrate, manage, and use their data by creating modern applications Operate as a trusted advisor that helps the Technology and Data Solutions (TDS) Practice and its customers achieve their goals Lead and manages the design and development of advanced test programs, processes, and systems to measure the functionality and integrity of - and services Lead the design and building of test processes Review advanced highly complex test procedures and protocols to backss product reliability and evaluates
the ability of products to meet performance standards and specifications Monitor the gathering of test data and typically supervises the evaluation of test results to determine if product designs and architecture meets customer specifications and performance expectations Develop advanced highly complex test simulations to evaluate how products react under different conditions and analyzes product failure to backss the integrity and reliability of product performance Define debug protocols for test hardware and software Analyze complex test cases and scenarios and proposes improvements Collaborate with other engineering groups to improve or upgrade product performance Provide sustainment and maintenance
support for existing applications using Test Driven Development (TDD) techniques Use software testing technologies and tools to build, test, and maintain test suites for product modules, components, and subsystems Develop tests for new features in support of rapidly emerging business and project requirements Work with agile development methodologies adhering to best practices and pursuing continued learning opportunities Collaborate with team members via MS Teams, Zoom, Git/Azure Dev Ops comments, documents, and frequent video conferences Possess a positive, can-do attitude and enjoys making a difference through technical contributions Stimulate new ideas and offer out-of-the-box thinking Act as team leader as needed in prioritizing group tasks, determining individual assignments, and reviewing work of lower-level QA testers Interact with customers, vendors, and external development partners as necessary Perform other tasks as assigned Quality Assurance Tester Qualifications Minimum of 6 years hands-on quality assurance testing experience BS Degree preferably but relevant experienced considered Experience with test automation tools such as Selenium, Load Runner, Postman, JUnit, and/or Test NG Strong familiarity with Agile Software Development Excellent communication and interpersonal skills Attention to detail and strong analytical skills Quality Assurance Tester Desired Qualifications Experience with the Air Force Human Resource System Technical Support (HRSTS) systems Experience with projects that include cloud solutions implemented in Amazon Web Services (AWS) Gov Cloud Experience with projects that include cloud solutions implemented in AWS Air Force Cloud One Experience in application modernization and/or application migration to the cloud Experience in CI/CD and Dev Sec Ops solutions Required Clearances and Screenings Do D Secret Clearance or ability to obtain one MUST be able to successfully pass a drug screen and background check About Joint Strategic Technologies (JST) No objective is beyond reach!
Joint Strategic Technologies (JST) enables successful mission outcomes from the back office to the battlefield. Our team includes leading experts from military, government and the private sector, all working together to help federal customers make a difference. Our goal is to Elevate the Impact that our employees have on our customers and treat every employee as a valued member of our team.
JST empowers employees to make decisions and take-action, thus improving overall organizational growth and employee development. Culture isn't something you talk about. It's something you do. JST is committed to creating a positive environment 'that reaches beyond work and careers' to support every employee's professional and personal objectives. JST values the well-being of every employee and encourages healthy lifestyles, family activities and community involvement. JST is a proud equal opportunity employer. All qualified applicants will be considered for employment without attention to age, race, color, religion, interaction, interactionual orientation, gender identity, national origin, veteran or disability status.
JST will not tolerate discrimination or harassment. Job Posted by Applicant Pro
