Location: Saint Louis, MO
Company: Bitrode
reading! Electrical Test Technician starts at $21.00/hour with potential higher offers to those with experience. We offer great benefits with 10 paid holidays, paid time off that starts to accrue on your first day, company paid basic life insurance and long-term disability, access to medical/dental/vision/other insurance, 401(k) with a company match, and comfortable, safe environment.
Who is Bitrode Corporation? With customers around the world and the United States, Bitrode is a manufacturing company for Cell, Module, and Pack Battery Testing Equipment. We offer an extensive product line of battery formation and laboratory test equipment, as well as software tools, battery simulation
and manufacturing automation tools appropriate to all battery applications and chemistries. If you are unsure what some of these are, just remember with electric vehicles and battery power as a goal for the future, we matter in that future.
We have a set of core values that start with safety, customer focus, and end with cooperation. We have managers, supervisors, and leads that work to listen to our employees and train them on what they do not know about our products. We strive to work as a team to get our products built, tested, and shipped to our customers. Our CEO knows every employee and takes time to personally welcome each individual to our organization. What do our Electrical
Component Testers Do? Our Electrical Test Technicians put our products through specific electrical testing.
You would be presented testing requirements and an assembled machine. You would need to properly connect the machine to high power electricity, with all safety precautions in place. Then, you would test the machine using Bitrode created software meant to run the machine. You would use multi-meters, High Potential test equipment, digital oscilloscope, PC based monitoring, and variable transformers. You would be responsible to record all testing data and even write reports on the computer. We must know in writing that our products are working properly for our customers before they ever leave the building.
If testing shows that there is a problem with the machine, you will need to troubleshoot the machine, resolve the issue, fix the problem, and retest the machine. Throughout the troubleshooting process, you will work anywhere from testing PCBs on a benchtop to analyzing power electronics used in our units. You will need to be able to roll-up your sleeves and do wiring and work with hand tools to rework products. You would need to be comfortable testing products at power levels up to 600VAC 3-phase and 2000VDC. We will provide you with arc flash protective clothing for your safety.
We also have a reimbursement program for prescription safety glasses and toe protective shoes. Once you are fully trained, you may be asked to travel to customer sites to service or commission our machines. This requires you to be a self-starter. You would need to make scheduled flights and drive to various locations in the USA on your own. You would need to professionally represent Bitrode while at the customer. What makes you qualified for this role? You need to: Have knowledge of electrical equivalent to a 2-year degree in Electrical Engineering. Be able to read schematics and have knowledge of electrical/electronic circuitry.
Be comfortable with power electronics, i. e. not only cabinet and module level testing but board level as well. Have proficient computer skills Be dependable and reliable to show up to work and do your job. Please be able to pay attention to details. Be willing and able to learn our products for testing purposes. Have or be able to obtain a driver's license, if/when asked to travel. Any experience in electrical product testing would be amazing!
regulatory standards.
Quality Inspectors support manufacturing and servicing operations by performing incoming component and in-process product inspections using standard measurement equipment. They identify, segregate and document rejected material and participate in Material Review Boards to ensure the proper documentation and disposition.
They may also review other related Quality documentation such as device history or calibration records.
superior products and services. About Nooter/Eriksen: Nooter/Eriksen is an employee-owned company with headquarters in Fenton, MO and Milan, Italy. We specialize in HRSG (Heat Recovery Steam Generator) design, fabrication, equipment, and solutions for clients in the power industry, worldwide.
We offer a flexible work schedule with the option of working half-days on Fridays! We provide a full benefits package. Our 401(K) provides an employer match and an annual non-elective contribution. We provide medical with an employer contribution toward the HSA. Dental and Short-Term disability is 100% covered by the company. We also offer vision and fitness reimbursement. We pride ourselves on our
collaborative environment where employees are empowered to advance their career, explore career paths, and grow personally and professionally. DAY IN THE LIFE: The Manager of Quality Control reports directly to the Director of Supply Management and will analyze quality systems to ensure that risk to Nooter/Eriksen is mitigated within market economical constraints, interpret third-party quality backssments of fabrication, installation and operational quality issues, and supervise the Quality Department personnel, including quality and welding engineers and assistants.
As the Manager of Quality Control you will lead the department by communicating company and department goals, setting clear
expectations and actively coaching/developing staff; ensure that the Source Inspection process effectively reduces risk and minimizes cost due to fabrication errors, promote resolution of Quality issues with Supplier, and monitor all quality issues to ensure systematic problems are addressed; supervise the execution of Nooter/Eriksen's Quality Plan and ensure that required certifications are renewed from year to year for continued operations; develop new Quality requirements to meet company goals and develop customer relationships both at the project level and management level, proactively work with department heads to create a high-performance team, and engage with industry organizations that provide support to our quality efforts and provide an avenue for input into quality requirement changes; and travel 10-15% by car or plane.
KEY QUALIFICATIONS. We want the person selected for this role to be successful! The following qualifications are essential to be effective in this role: Four-year degree in engineering is strongly preferred. In lieu of an engineering degree, a four-year degree in a technical field with relevant work experience may be considered. Seeking at least eight (8) years of experience in quality, ASME Section I or VIII, heavy industry, manufacturing, construction, welding, non-destructive testing, and/or other similar fields.
At least three (3) years of experience leading and managing direct reports. Ability to read, write, problem solve, make quick decisions, interpret data and analyze results; effective written and verbal communication is essential. If you are interested in this position, please simply click the Apply button to get started! Our application is quick and should take you less than 5 minutes to fill out. Your information will be then sent directly to the Recruiter. Nooter/Eriksen is committed to creating and maintaining an environment in which all employees feel valued, included, safe, and empowered to do their best work.
We are proud to be an equal opportunity workplace and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, interactionual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics. Pre-employment drug screen and background check required. Job Posted by Applicant Pro
your skills to grow with a great company? Then, this position is right for you! Quality Assurance Technician I - Batch Record Review Position: Full time Our offer: Medical/Dental/Vision Plan Insurance, Short and Long-Term Disability and Life Insurance after 60 days.
3% Safe Harbor contribution to your 401k. Up to a 4% Discretionary Match (like a profit-sharing contribution) to your 401k. Paid Time Off (PTO) Employees eligible first day of employment. 9 Company Paid Holidays (72 hours) each year. Uniforms Provided Foot Protection- annual allowance for all laboratory, maintenance and production employees. 24-hour access to our free, on-site fitness center. We provide Individual development,
on-the-job training, and development programs designed to enhance your professional growth and development while ensuring you feel valued, inspired and appreciated at work.
Jost Chemical is an equal opportunity employer and affirmatively seeks diversity in its workforce. We consider applicants, and make all employment decisions, without regard to race, color, religion, creed, gender, national origin, age, disability, marital or veteran status, or any other legally protected status. We are committed to recruiting and retaining the best talent in the chemical manufacturing industry. Minimum Requirements High School Diploma or G. E. D. Four years of chemical, medical, or similar manufacturing
experience Knowledge & Experience Requirements Must have a quality and continuous improvement mindset.
Ability to utilize a computer, Microsoft Outlook, and Microsoft Excel. Very high attention to detail and basic math skills. Strong understanding of complex processes and technical equipment. Ability to work in a fast-paced environment while meeting productivity demands. Primary Responsibilities Reviewing and approving all batch record documentation. Ensuring all errors in batch record documentation are appropriately and promptly resolved. Printing batch record documentation requested by manufacturing. Reconciling batch record documentation. Conduct various Quality tasks in the plant environment.
Generate and maintain key performance indicators for management review. Other QA duties as needed.
in focused on the future? If you are interested, keep reading! Electrical Component Tester start at $19.00/hour with higher offers to those with experience. We offer great benefits with 10 paid holidays, paid time off that starts to accrue on your first day, company paid basic life insurance and long-term disability, access to medical/dental/vision/other insurance, 401(k) with a company match, and comfortable, safe environment.
Who is Bitrode Corporation? With customers around the world and the United States, Bitrode is a manufacturing company for Cell, Module, and Pack Battery Testing Equipment. We offer an extensive product line of battery formation and laboratory test equipment, as
well as software tools, battery simulation and manufacturing automation tools appropriate to all battery applications and chemistries. If you are unsure what some of these are, just remember with electric vehicles and battery power as a goal for the future, we matter in that future.
We have a set of core values that start with safety, customer focus, and end with cooperation. We have managers, supervisors, and leads that work to listen to our employees and train them on what they do not know about our products. We strive to work as a team to get our products built, tested, and shipped to our customers. Our CEO knows every employee and takes time to personally welcome each individual to
our organization. What do our Electrical Component Testers Do? Our Electrical Component Testers put our products through specific electrical testing.
You would be presented testing requirements and an assembled machine. You would need to properly connect the machine to high power electricity, with all safety precautions in place. Then, you would test the machine using Bitrode created software meant to run the machine. You would use multi-meters, High Potential test equipment, digital oscilloscope, PC based monitoring, and variable transformers. You would be responsible to record all testing data and even write reports on the computer. We must know in writing that our products are working properly for our customers before they ever leave the building.
If testing shows that there is a problem with the machine, you will need to troubleshoot the machine, resolve the issue, fix the problem, and retest the machine. Throughout the troubleshooting process, you will work anywhere from testing PCBs on a benchtop to analyzing power electronics used in our units. You will need to be able to roll-up your sleeves and do wiring and work with hand tools to rework products. You would need to be comfortable testing products at power levels up to 600VAC 3-phase and 2000VDC.
We will provide you with arc flash protective clothing for your safety. We also have a reimbursement program for prescription safety glasses and toe protective shoes. You will be given work assignments so that you know what to work on. You will focus on testing our products correctly, the first time. If you need to clarify something, we have a lead working near you so you can just ask. Managers are out on the production floor to resolve any issues that arise. Once you are fully trained, you may be asked to travel to customer sites to service or commission our machines. This requires you to be a self-starter.
You would need to make scheduled flights and drive to various locations in the USA on your own. You would need to professionally represent Bitrode while at the customer. What makes you qualified for this role? You need to: Have knowledge of electrical equivalent to a 2-year degree in Electrical Engineering. Be able to read schematics and have knowledge of electrical/electronic circuitry. Be comfortable with power electronics, i. e. not only cabinet and module level testing but board level as well. Have proficient computer skills Be dependable and reliable to show up to work and do your job.
Please be able to pay attention to details. Be willing and able to learn our products for testing purposes. Have or be able to obtain a driver's license, if/when asked to travel. Any experience in electrical product testing would be amazing!
Prepares written inspection plans, procedures and testing instructions. Ensures conformance to customer's quality requirements as defined by the Purchase Order, engineering print and regulatory requirements. Initiate, plan, develop and monitor processes for successful execution of the quality in the manufacturing environment.
Assist in development of work standards and control the inspection process. Audit product and processes to requirements. Assist in training of Quality Inspection personnel. Identify and execute elimination of defects and waste. Assist in maintenance of the Quality Management System. Lots of growth opportunity for the right candidate. ESSENTIAL DUTIES and RESPONSIBILITIES:
Engineering Collaborate with our customers' quality and engineering personnel to determine critical part features and review manufacturability of design during the APQP process.
Make recommendations to modify customer part specifications and tolerances as necessary to support cost effective production. Provide engineering support to operations ensuring consistent application of quality techniques Resolve quality issues of capability, tolerancing, and materials related issues. Resolve quality issues by identifying problems, examining solution options, implementing action plans, and providing resources. Effectively communicate and reinforce our commitment to quality improvement efforts
Develop and submit PPAP documents for new product launches and Annual Validations to meet customer requirements.
Determine when process stability and capability studies should be performed on existing processes. Review and analyze results. Recommend changes to processes based upon findings and perform follow up to verify effectiveness. Participate in the Advanced Product Quality Planning activities to determine appropriate use of existing and new measurement systems during new tool or process design and startup. Coordinate pre-launch production trial run process monitoring. Participate in the development of Failure Mode and Effects Analysis (FMEA). Develop and maintain Control Plans and FMEA's throughout the life of the part.
Facilitate and promote use of appropriate problem solving techniques for effective root cause analysis and successful corrective action. Perform duties in accordance with quality system requirements as the voice of our customers. Coordinate with Sales, Purchasing, Engineering, Production, and Toolroom to resolve customer complaints and concerns. Lead PPM improvement plan for strategic customers. Apply appropriate use of statistical techniques. Determine and apply appropriate Measurement System Analysis tools. POSITION CHALLENGES: Maintaining the integrity of the certified quality system requirements with lean, cost-effective strategies that meet the organization's needs.
Advocating as the " voice of the customer" demanding the highest quality expectations from the organization. Executing the duties of the position such that the focus is largely proactive versus reactive. SUPERVISION EXERCISED: Internal Audit Team ORGANIZATIONAL RELATIONSHIPS: Internal Regularly interact with Materials, Quality, Engineering, Sales, and all Manufacturing functions. External Regularly interact with all levels of customers and prospects.
QUALIFICATION REQUIREMENTS: Minimum Technical Qualifications: Bachelor's degree in engineering, prefer Manufacturing, Mechanical or Plastics. 1-3 years' experience as a quality engineer with 1+ in automotive. Exceptional mechanical aptitude (i. e. intuitive understanding of mechanical processes) Proven track record of driving continuous quality improvement in a manufacturing environment. Previous work experience in a Tier II supplier. Customer quality assurance experience. Previous audit experience. Experience with overseas customer base Preferred Technical/Professional Qualifications: Technical knowledge of injection molding and stamping processes.
Formal training and previous experience as an Internal Auditor. Project management experience. Certified Quality Engineer. Background in GD&T.
of an article. Your Job You will make a difference to the success of this independently owned business as will be responsible for compliance with all procedures provided by the repair station inspection system as appropriate to any article being inspected, overhauled, repaired, or altered by the repair station.
Compensation We offer a competitive total compensation package, including competitive wages and benefits. based on your years of experience. Please note that applicants for these positions must have current status to work in the United States of America in order to be considered for this opportunity. Want to know what your job may be like - click here Working Hours This is a full-time
(FT) 40-hour-a-week position. Hours will change based on business operational needs and flexibility is required. This position is onsite. Must have the flexibility to work second or weekend shifts.
Experience and Education Requirements A minimum of 3 to 5 years of production inspection experience in aviation is strongly preferred. Experience with business aircraft interior completions/refurbishments, heavy maintenance inspections, and exterior paint processes as applicable. Must possess an A&P Certificate or Repairman Certificate issued by Flying Colours Corp. Minimum of 2 years of inspection experience applying Geometric Dimensioning & Tolerancing (GD&T) Principles and Practices. Comprehensive
knowledge of tasks and responsibilities within their technical area.
Comprehensive knowledge of common inspection measuring equipment including but not limited to surface plates, micrometers, height gauges, radius gages, bore gauges, and dial indicators. Ability to identify procedures and parts using approved data and manufacturer maintenance and parts manuals. Good manual dexterity and adept in the use of precision measuring tools. The Details Primary duties include but are not limited to the following: Achieve the required product quality standards by creating, executing, and reinforcing AS9100 system objectives and processes for interior completions.
Perform in-process and final inspections during production. Acting as the customer liaison for source inspection activities. Maintain a thorough understanding of the content of the Company QSM and RSM. Ensure that inspection items are complied with properly and contain the correct manufacturer AMM and applicable references. Ensure that work packages are filled out properly, and reference correct manufacturer AMM, customer, and/or regulatory references as applicable. Review in process work instructions, procedures, and process specs. Monitors and verifies quality in accordance with control processes.
Recommends improvements and amendments as required. Performs review inspections on aircraft and components to monitor the quality of work performed and the adequacy of standards and equipment. Apply problem-solving techniques to ensure best practices and continuous improvement in quality deliverables. Utilize the appropriate resources to solve day-to-day problems; react quickly to unforeseen events. We look forward to hearing from you.
