Location: Marshall, MO
Company: Conagra Brands
an important role in the plant leadership team. You will: Ensure all plant personnel follow good manufacturing practices including proper waste disposal, personal hygiene and personal practices. Work with Operations and Maintenance to lead Food Safety and Quality ownership to the floor.
Manage plant timelines and important milestones for the Food safety and Quality Improvement Plan and other food safety/quality metrics. Analyze and communicate quality and food safety issues, both internal and external (consumer complaints), and initiates applicable corrective measures. Ensure compliance to all applicable regulatory agency requirements (USDA, FDA, CFIA), company safety policies and OSHA
regulations. Liaison with local USDA and FDA inspectors and any other food regulatory officers that visit the plant. Provide leadership and compliance on food safety and quality programs, such as HACCP, SQF certification, recall program, environmental monitoring program, and comprehensive pest control program.
Be a liaison for all technical and QA issues between operations, RQI, and sales/marketing departments. Provide corporate with QA assistance involving vendor issues. Oversee product quality with regards to new product implementation. Ensure use of applicable MOPD and CQV tools. FS&Q pillar owner for Conagra Performance System. Use continuous improvement tools to identify opportunity
and development improvement plans. Lead Regulatory, Customer (including SQF) and Internal Audit process including responses/corrective actions.
You Have: Bachelor's degree in Biology, Food Science, or other related program 4 years of related QA leadership experience Skills in monitoring and measurement of process control, auditing, manufacturing of food products, sanitation process, knowledge of HACCP, SSOP regulations, skills in team leadership, and root cause analysis Skills in applying mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis, formalizing process capability, institutionalizing process control and predictive quality process.
Experience with Continuous Improvement/Lead Manufacturing processes concerning Quality and Food Safety. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this role. Relocation assistance is available for this position. Preference will be given to local candidates. At this time, we require applicants for this role to be legally authorized to work in the United States without requiring employer sponsorship either now or in the future.
#LI-onsite Our Benefits: We care about your total well-being and will support you with the following, subject to your location and role: Health: Medical, dental and vision insurance, company-paid life, accident and disability insurance Wealth: great pay, incentive opportunity, matching 401(k) and stock purchase plan Growth: online courses, virtual and classroom development experiences Balance: paid-time off, parental leave, flexible work-schedules (subject to your location and role) Our Company: Conagra Brands is one of North America'sleading branded food companies.
We have a rich heritage of making great food, and a team that's passionate about innovation and growth. Conagra offers choices for every occasion through iconic brands, such as Birds Eye, Marie Callender's, Banquet, Healthy Choice, Slim Jim, Reddi-wip, and Vlasic, and emerging brands, including Angie's BOOMCHICKAPOP, Duke's, Earth Balance, Gardein, and Frontera. We pride ourselves on having the most impactful, energized and inclusive culture in the food industry. For more information, visit . Conagra Brandsis an equal opportunity employer and considers qualified applicants for employment without regard to interaction, race, color, religion, ethnic or national origin, gender, interactionual orientation, gender identity or expression, age, pregnancy, leave status, disability, veteran status, genetic information and/or any other characteristic or status protected by national, federal, state or local law.
PDN-9ac9bf-b0e0-dfea81de8976
Prepares written inspection plans, procedures and testing instructions. Ensures conformance to customer's quality requirements as defined by the Purchase Order, engineering print and regulatory requirements. Initiate, plan, develop and monitor processes for successful execution of the quality in the manufacturing environment.
Assist in development of work standards and control the inspection process. Audit product and processes to requirements. Assist in training of Quality Inspection personnel. Identify and execute elimination of defects and waste. Assist in maintenance of the Quality Management System. Lots of growth opportunity for the right candidate. ESSENTIAL DUTIES and RESPONSIBILITIES:
Engineering Collaborate with our customers' quality and engineering personnel to determine critical part features and review manufacturability of design during the APQP process.
Make recommendations to modify customer part specifications and tolerances as necessary to support cost effective production. Provide engineering support to operations ensuring consistent application of quality techniques Resolve quality issues of capability, tolerancing, and materials related issues. Resolve quality issues by identifying problems, examining solution options, implementing action plans, and providing resources. Effectively communicate and reinforce our commitment to quality improvement efforts
Develop and submit PPAP documents for new product launches and Annual Validations to meet customer requirements.
Determine when process stability and capability studies should be performed on existing processes. Review and analyze results. Recommend changes to processes based upon findings and perform follow up to verify effectiveness. Participate in the Advanced Product Quality Planning activities to determine appropriate use of existing and new measurement systems during new tool or process design and startup. Coordinate pre-launch production trial run process monitoring. Participate in the development of Failure Mode and Effects Analysis (FMEA). Develop and maintain Control Plans and FMEA's throughout the life of the part.
Facilitate and promote use of appropriate problem solving techniques for effective root cause analysis and successful corrective action. Perform duties in accordance with quality system requirements as the voice of our customers. Coordinate with Sales, Purchasing, Engineering, Production, and Toolroom to resolve customer complaints and concerns. Lead PPM improvement plan for strategic customers. Apply appropriate use of statistical techniques. Determine and apply appropriate Measurement System Analysis tools. POSITION CHALLENGES: Maintaining the integrity of the certified quality system requirements with lean, cost-effective strategies that meet the organization's needs.
Advocating as the " voice of the customer" demanding the highest quality expectations from the organization. Executing the duties of the position such that the focus is largely proactive versus reactive. SUPERVISION EXERCISED: Internal Audit Team ORGANIZATIONAL RELATIONSHIPS: Internal Regularly interact with Materials, Quality, Engineering, Sales, and all Manufacturing functions. External Regularly interact with all levels of customers and prospects.
QUALIFICATION REQUIREMENTS: Minimum Technical Qualifications: Bachelor's degree in engineering, prefer Manufacturing, Mechanical or Plastics. 1-3 years' experience as a quality engineer with 1+ in automotive. Exceptional mechanical aptitude (i. e. intuitive understanding of mechanical processes) Proven track record of driving continuous quality improvement in a manufacturing environment. Previous work experience in a Tier II supplier. Customer quality assurance experience. Previous audit experience. Experience with overseas customer base Preferred Technical/Professional Qualifications: Technical knowledge of injection molding and stamping processes.
Formal training and previous experience as an Internal Auditor. Project management experience. Certified Quality Engineer. Background in GD&T.
of an article. Your Job You will make a difference to the success of this independently owned business as will be responsible for compliance with all procedures provided by the repair station inspection system as appropriate to any article being inspected, overhauled, repaired, or altered by the repair station.
Compensation We offer a competitive total compensation package, including competitive wages and benefits. based on your years of experience. Please note that applicants for these positions must have current status to work in the United States of America in order to be considered for this opportunity. Want to know what your job may be like - click here Working Hours This is a full-time
(FT) 40-hour-a-week position. Hours will change based on business operational needs and flexibility is required. This position is onsite. Must have the flexibility to work second or weekend shifts.
Experience and Education Requirements A minimum of 3 to 5 years of production inspection experience in aviation is strongly preferred. Experience with business aircraft interior completions/refurbishments, heavy maintenance inspections, and exterior paint processes as applicable. Must possess an A&P Certificate or Repairman Certificate issued by Flying Colours Corp. Minimum of 2 years of inspection experience applying Geometric Dimensioning & Tolerancing (GD&T) Principles and Practices. Comprehensive
knowledge of tasks and responsibilities within their technical area.
Comprehensive knowledge of common inspection measuring equipment including but not limited to surface plates, micrometers, height gauges, radius gages, bore gauges, and dial indicators. Ability to identify procedures and parts using approved data and manufacturer maintenance and parts manuals. Good manual dexterity and adept in the use of precision measuring tools. The Details Primary duties include but are not limited to the following: Achieve the required product quality standards by creating, executing, and reinforcing AS9100 system objectives and processes for interior completions.
Perform in-process and final inspections during production. Acting as the customer liaison for source inspection activities. Maintain a thorough understanding of the content of the Company QSM and RSM. Ensure that inspection items are complied with properly and contain the correct manufacturer AMM and applicable references. Ensure that work packages are filled out properly, and reference correct manufacturer AMM, customer, and/or regulatory references as applicable. Review in process work instructions, procedures, and process specs. Monitors and verifies quality in accordance with control processes.
Recommends improvements and amendments as required. Performs review inspections on aircraft and components to monitor the quality of work performed and the adequacy of standards and equipment. Apply problem-solving techniques to ensure best practices and continuous improvement in quality deliverables. Utilize the appropriate resources to solve day-to-day problems; react quickly to unforeseen events. We look forward to hearing from you.
