Location: Cliffside Park, NJ
Company: Panera Bread
Criticality Analysis. In addition, the RE provides engineering support in the design and installation stages of new assets and the modification of existing assets as well as provide technical support to maintenance management, technicians, and production personnel to prevent and mitigate operational issues.
The RE will utilize Computerized Maintenance Management System (CMMS), Enterprise Asset Management System (EAM) for managing assets, determine preventive maintenance (PM) strategies, create PM Schedules and PM Tasks, assist with spare parts inventory, create and modifying asset data, and generating reports for assigned metrics and business decisions. CMMS, electronic OEE, and data
historian system will also be used to extract, analyze, and identify root causes of failures to improve reliability. JOB RESPONSIBILITIES Collect, analyze, and identify data from CMMS, OEE system, and historian using spreadsheets and BI software to manage risks that impact asset reliability.
Collaborate with engineering, maintenance, and asset owner to identify root causes of downtime then create an action plan to eliminate downtime by establishing corrective, preventive, and predictive maintenance program. Development of life cycle asset management by designing, installing, and modifying equipment to reduce failure and minimize the total cost of ownership. Develop benchmark for optimal
MRO suppliers and equipment maintenance service providers. Review and optimize MRO supplies to provide reduced downtime, repair times, and optimize spending.
Professionally and systematically define, design, develop, monitor and refine an asset maintenance plan that includes value-added preventive maintenance tasks. Effectively utilize predictive and other non-destructive testing methodologies designed to identify and isolate inherent reliability problems. Works with production group to perform analyses of assets including Asset Utilization, Overall Equipment Effectiveness, Remaining Useful Life and other parameters that define operating condition, reliability and costs of assets.
Apply value analysis to repair/replace, repair/redesign, and make/buy decisions. Perform work within applicable standards, guidelines, and procedures. Perform GEMBA walks to observe the process being improved. Real world observation and active engagement in the field must be part of daily routine. Facilitate equipment and building start-up and training activities. Understand, gather, apply, and report monthly metrics on asset performance. Ensure individual training and certification requirements are completed. Ensure assigned CAPA's and deviation tasks are completed on time.
Utilize quality systems to ensure compliance with regulatory requirements Lead change control and tasks to deploy improvements with help from stakeholders. Function as a technical resource on equipment and systems, such as developing PM procedures and troubleshooting Requirements Bachelor's degree in an engineering related field and 3 - 5 years experience as a Reliability Engineer. Experience in reliability engineering tools such as FMEA, RCM, MTBF, Life-Cycle Costing, Pareto, and RCFA. Direct experience within regulated environments such as c GMP, OSHA, EPA and good understanding of Quality Systems.
Proven ability to apply technical theories and concepts in the biotechnical / medical industries. Proficiency utilizing MS Office suite applications, especially Excel (pivot tables, statistical modeling, forecasting and prediction, macros, charts and graphs, index matching, conditional formatting, power query, sparklines)Experience with a Computerized Maintenance Management System (CMMS) and/or Enterprise Management System (EAM). Experience with Infor EAM CMMS a plus. Excellent verbal, written, and presentation skills. Working knowledge of biotechnical / medical manufacturing processes Working knowledge of black and clean utilities including water for injection (WFI) generation & distribution, purified water systems (RO), clean steam generators, plant steam boilers, electrical distribution.
Have Certified Maintenance Reliability Professional (CMRP) certification or committed to becoming a CMRP. Project management experience a plus. Sanofi Inc. and its U. S. affiliates are Equal Opportunity and Affirmative Action employers committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race; color; creed; religion; national origin; age; ancestry; nationality; marital, domestic partnership or civil union status; interaction, gender, gender identity or expression; affectional or interactionual orientation; disability; veteran or military status or liability for military status; domestic violence victim status; atypical cellular or blood trait; genetic information (including the refusal to submit to genetic testing) or any other characteristic protected by law.
#GD-SG#LI-GZPDNAt Sanofi diversity and inclusion is foundational to how we operate and embedded in our Core Values. We recognize to truly tap into the richness diversity brings we must lead with inclusion and have a workplace where those differences can thrive and be leveraged to empower the lives of our colleagues, patients and customers.
We respect and celebrate the diversity of our people, their backgrounds and experiences and provide equal opportunity for all. Sanofi Ridgefield site is recruiting a Reliability Engineer (RE) to help identify and manage asset reliability risks that could negatively impact the business operations. The RE works to maximum asset uptime by finding ways to minimize production losses. The RE manages risks to attain strategic objectives utilizing tools such as FMEA, RCA, and Criticality Analysis.
In addition, the RE provides engineering support in the design and installation stages of new assets and the modification of existing assets as well as provide technical support to maintenance management, technicians, and production personnel to prevent and mitigate operational issues. The RE will utilize Computerized Maintenance Management System (CMMS), Enterprise Asset Management System (EAM) for managing assets, determine preventive maintenance (PM) strategies, create PM Schedules and PM Tasks, assist with spare parts inventory, create and modifying asset data, and generating reports for assigned metrics and business decisions.
CMMS, electronic OEE, and data historian system will also be used to extract, analyze, and identify root causes of failures to improve reliability. JOB RESPONSIBILITIES Collect, analyze, and identify data from CMMS, OEE system, and historian using spreadsheets and BI software to manage risks that impact asset reliability. Collaborate with engineering, maintenance, and asset owner to identify root causes of downtime then create an action plan to eliminate downtime by establishing corrective, preventive, and predictive maintenance program.
Development of life cycle asset management by designing, installing, and modifying equipment to reduce failure and minimize the total cost of ownership. Develop benchmark for optimal MRO suppliers and equipment maintenance service providers. Review and optimize MRO supplies to provide reduced downtime, repair times, and optimize spending. Professionally and systematically define, design, develop, monitor and refine an asset maintenance plan that includes value-added preventive maintenance tasks. Effectively utilize predictive and other non-destructive testing methodologies designed to identify and isolate inherent reliability problems.
Works with production group to perform analyses of assets including Asset Utilization, Overall Equipment Effectiveness, Remaining Useful Life and other parameters that define operating condition, reliability and costs of assets. Apply value analysis to repair/replace, repair/redesign, and make/buy decisions. Perform work within applicable standards, guidelines, and procedures. Perform GEMBA walks to observe the process being improved. Real world observation and active engagement in the field must be part of daily routine.
Facilitate equipment and building start-up and training activities. Understand, gather, apply, and report monthly metrics on asset performance. Ensure individual training and certification requirements are completed. Ensure assigned CAPA's and deviation tasks are completed on time. Utilize quality systems to ensure compliance with regulatory requirements Lead change control and tasks to deploy improvements with help from stakeholders. Function as a technical resource on equipment and systems, such as developing PM procedures and troubleshooting Requirements Bachelor's degree in an engineering related field and 3 - 5 years experience as a Reliability Engineer.
Experience in reliability engineering tools such as FMEA, RCM, MTBF, Life-Cycle Costing, Pareto, and RCFA. Direct experience within regulated environments such as c GMP, OSHA, EPA and good understanding of Quality Systems. Proven ability to apply technical theories and concepts in the biotechnical / medical industries. Proficiency utilizing MS Office suite applications, especially Excel (pivot tables, statistical modeling, forecasting and prediction, macros, charts and graphs, index matching, conditional formatting, power query, sparklines)Experience with a Computerized Maintenance Management System (CMMS) and/or Enterprise Management System (EAM).
Experience with Infor EAM CMMS a plus. Excellent verbal, written, and presentation skills. Working knowledge of biotechnical / medical manufacturing processes Working knowledge of black and clean utilities including water for injection (WFI) generation & distribution, purified water systems (RO), clean steam generators, plant steam boilers, electrical distribution. Have Certified Maintenance Reliability Professional (CMRP) certification or committed to becoming a CMRP.
Project management experience a plus. Sanofi Inc. and its U. S. affiliates are Equal Opportunity and Affirmative Action employers committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race; color; creed; religion; national origin; age; ancestry; nationality; marital, domestic partnership or civil union status; interaction, gender, gender identity or expression; affectional or interactionual orientation; disability; veteran or military status or liability for military status; domestic violence victim status; atypical cellular or blood trait; genetic information (including the refusal to submit to genetic testing) or any other characteristic protected by law.
#GD-SG#LI-GZPDNAt Sanofi diversity and inclusion is foundational to how we operate and embedded in our Core Values. We recognize to truly tap into the richness diversity brings we must lead with inclusion and have a workplace where those differences can thrive and be leveraged to empower the lives of our colleagues, patients and customers. We respect and celebrate the diversity of our people, their backgrounds and experiences and provide equal opportunity for all.
PDN-9ae7db41-6d83-454d-94e5-0564b820edbf
FAA V&V and T&E. The candidate may lead review and oversight efforts or act on behalf of FAA T&E Stakeholder or Test Standards Board. The position will involve working across all task areas in the ANG-E5A Work Order but will primarily work under Performance Work Statement (PWS) Tasks 6 (T&E Standard Support) & Task 7 (V&V Practices and Conduct Support).
Performs formal system testing activities for a particular project or subset of a larger project under supervision of more experienced personnel. Performs analysis of documented user requirements and directs or assists in the design of test plans in support of user requirements. Participates in all phases of risk management backssment
and system development. Responsible for ensuring that the test design and documentation support all applicable clients, agency or industry standards, timelines and budgets.
Responsible for ensuring test conclusions and recommendations are fully supported by test results. Required skills: Minimum of 10-15 years of relative experience FAA Test and Evaluation experience with a minimum of 2-3 major FAA programs. Current knowledge of FAA Testing Standards Current experience working on test programs at the WJHTC. Good communication skills Good writing skills - will require review and comments of current FAA testing documents against FAA policy. Preferred Experience FAA testing, Federal NOTAM
system Jira for tracking, Selenium (automation) Agile (Standard waterfall is also acceptable) Education Bachelor's Degree in engineering, Business, Finance, Administration, or discipline 5 years of relevant experience may be substituted for the Bachelor's Degree.
Master's Degree or MBA in related field may be substituted for Bachelor's degree and 3 years experience. Ph D in related field may be substituted for Bachelor's degree and 7 years experience LS Technologies, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, interaction, national origin, disability status, genetics, protected veteran status, interactionual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Job Posted by Applicant Pro
hybrid roles that are a blend of onsite and remote work, remote local roles that are primarily home-based but require some level of purpose-driven in-person interaction and living within a commutable distance, and remote non-local roles that can be effectively performed remotely with the ability to work in approved states.
PSEG offers a unique experience to our more than 12,000 employees – we provide the resources and opportunities for career development that come with being a Fortune 500 company, as well as the attention, camaraderie and care for one another you might typically associate with a small business. Our focus on combatting climate change through clean energy technology, our
new net zero climate vision for 2030 and enhanced commitment to diversity, equity and inclusion; and supporting the communities we serve make this a particularly exciting time to join PSEG.
Job Summary The Engineering Services (ES) Engineer (Turbine Engineer) reports to the Turbine Engineering Services Manager to provide technical support for the Power Uprate Project for Salem Units 1 and 2 to achieve project scope, schedule, budget and safety goals consistent with Nuclear and Station goals and regulatory requirements. Job Responsibilities Turbine Engineer will perform the following responsibilities in support of the project portfolio: Provide vendor oversight for all aspects of main
steam turbine upgrades from project initiation to installation backss the required scope of work and exploring various alternative solutions.
Review procurement specifications, modification packages, and factory and field testing for quality. Provide field support during modifications walkdowns, installation and testing. Interface with the project stakeholders including Project Management, Operations, Work Management, Maintenance, Design / Plant Engineering, and Licensing. Interface with system engineers to ensure adequate systems integration including preventive maintenance and surveillance program requirements. Support Operations and Maintenance technical procedural changes Job Specific Qualifications REQUIRED : BS Degree in Mechanical, Civil or Chemical Engineering or related technical degree with 7 years performing related Engineering work in a nuclear or related industry (including experience in specific discipline) Experience in turbine operation and design with a power plant or vendor.
Work effectively with a team to achieve team goals. Support or manage large-scale plant modifications. Independently multi-task and resolve conflicting priorities. Demonstrated Communication and presentation skills. Demonstrated project management skills including Microsoft product usage (Excel, Word, Power Point).
Must meet and maintain Nuclear's requirements for unescorted site access DESIRED : Project Management experience and/or certification Prior power uprate experience System engineering/test engineer experience and/or qualification PWR SRO license or Certification PE License Disclaimer Certain positions at the Company may require you to have access to Part 810-Controlled Information. Under the law, the Company is limited in who it can share this information with and in certain circumstances it is necessary to obtain specific authorization before the Company can share this information.
Accordingly, if the position does require access to this information, you must complete a 10 CFR Part 810 Export Control Compliance Nationality Request Form, a copy of which will be provided to you by Talent Acquisition if an offer is made. If there is a need for specific authorization, due to the time it takes to obtain authorization from the government, we will likely not be able to further proceed with an offer. PSEG is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic.
Legally protected characteristics include race, color, religion, national origin, interaction, age, marital status, interactionual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals. As an employee of PSEG you should be aware that during storm restoration efforts, you may be required to perform functions outside of your routine duties and on a schedule that may be different from normal operations. PSEG’s drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing.
For employees in federally regulated roles (including positions covered by USDOT, PHMSA, or NRC regulations), this also includes random testing. All drug and alcohol testing for federally regulated roles is inclusive of marijuana. Employees who transfer into a federally regulated role are subject to drug and alcohol testing, inclusive of marijuana. PSEG employees must apply for jobs internally through em Power which can be accessed through sharepoint. by clicking on the em Power icon, then selecting careers. This site ( jobs.
/ ) is strictly for candidates who are not currently PSEG employees, with the exception of PSEG employees who do not have company email addresses. PSEG is committed to providing reasonable accommodations to individuals with disabilities. If you have a disability and need assistance applying for a position, please call 973-430-xyz X or email xyz X@. If you need to request a reasonable accommodation to perform the essential functions of the job, email xyz X@. Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision.
ADDITIONAL EEO/AA INFORMATION (Click link below) Know your Rights: Workplace Discrimination is Illegal Pay Transparency Nondiscrimination Provision
hybrid roles that are a blend of onsite and remote work, remote local roles that are primarily home-based but require some level of purpose-driven in-person interaction and living within a commutable distance, and remote non-local roles that can be effectively performed remotely with the ability to work in approved states.
PSEG offers a unique experience to our more than 12,000 employees – we provide the resources and opportunities for career development that come with being a Fortune 500 company, as well as the attention, camaraderie and care for one another you might typically associate with a small business. Our focus on combatting climate change through clean energy technology, our
new net zero climate vision for 2030 and enhanced commitment to diversity, equity and inclusion; and supporting the communities we serve make this a particularly exciting time to join PSEG.
Job Summary The Engineering Services (ES) Engineer (Turbine Engineer) reports to the Turbine Engineering Services Manager to provide technical support for the Power Uprate Project for Salem Units 1 and 2 to achieve project scope, schedule, budget and safety goals consistent with Nuclear and Station goals and regulatory requirements. Job Responsibilities Turbine Engineer will perform the following responsibilities in support of the project portfolio: Provide vendor oversight for all aspects of main
steam turbine upgrades from project initiation to installation backss the required scope of work and exploring various alternative solutions.
Review procurement specifications, modification packages, and factory and field testing for quality. Provide field support during modifications walkdowns, installation and testing. Interface with the project stakeholders including Project Management, Operations, Work Management, Maintenance, Design / Plant Engineering, and Licensing. Interface with system engineers to ensure adequate systems integration including preventive maintenance and surveillance program requirements. Support Operations and Maintenance technical procedural changes.
Job Specific Qualifications REQUIRED : BS Degree in Mechanical, Civil or Chemical Engineering or related technical degree with 10 years performing related Engineering work in a nuclear or related industry (including experience in specific discipline) Experience in turbine operation and design with a power plant or vendor. Work effectively with a team to achieve team goals. Support or manage large-scale plant modifications. Independently multi-task and resolve conflicting priorities. Demonstrated Communication and presentation skills. Demonstrated project management skills including Microsoft product usage (Excel, Word, Power Point).
Must meet and maintain Nuclear's requirements for unescorted site access. DESIRED : Project Management experience and/or certification Prior power uprate experience System engineering/test engineer experience and/or qualification PWR SRO license or Certification PE license Disclaimer Certain positions at the Company may require you to have access to Part 810-Controlled Information. Under the law, the Company is limited in who it can share this information with and in certain circumstances it is necessary to obtain specific authorization before the Company can share this information.
Accordingly, if the position does require access to this information, you must complete a 10 CFR Part 810 Export Control Compliance Nationality Request Form, a copy of which will be provided to you by Talent Acquisition if an offer is made. If there is a need for specific authorization, due to the time it takes to obtain authorization from the government, we will likely not be able to further proceed with an offer. PSEG is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic.
Legally protected characteristics include race, color, religion, national origin, interaction, age, marital status, interactionual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals. As an employee of PSEG you should be aware that during storm restoration efforts, you may be required to perform functions outside of your routine duties and on a schedule that may be different from normal operations. PSEG’s drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing.
For employees in federally regulated roles (including positions covered by USDOT, PHMSA, or NRC regulations), this also includes random testing. All drug and alcohol testing for federally regulated roles is inclusive of marijuana. Employees who transfer into a federally regulated role are subject to drug and alcohol testing, inclusive of marijuana. PSEG employees must apply for jobs internally through em Power which can be accessed through sharepoint. by clicking on the em Power icon, then selecting careers. This site ( jobs.
/ ) is strictly for candidates who are not currently PSEG employees, with the exception of PSEG employees who do not have company email addresses. PSEG is committed to providing reasonable accommodations to individuals with disabilities. If you have a disability and need assistance applying for a position, please call 973-430-xyz X or email xyz X@. If you need to request a reasonable accommodation to perform the essential functions of the job, email xyz X@. Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision.
ADDITIONAL EEO/AA INFORMATION (Click link below) Know your Rights: Workplace Discrimination is Illegal Pay Transparency Nondiscrimination Provision
hybrid roles that are a blend of onsite and remote work, remote local roles that are primarily home-based but require some level of purpose-driven in-person interaction and living within a commutable distance, and remote non-local roles that can be effectively performed remotely with the ability to work in approved states.
PSEG offers a unique experience to our more than 12,000 employees – we provide the resources and opportunities for career development that come with being a Fortune 500 company, as well as the attention, camaraderie and care for one another you might typically associate with a small business. Our focus on combatting climate change through clean energy technology, our
new net zero climate vision for 2030 and enhanced commitment to diversity, equity and inclusion; and supporting the communities we serve make this a particularly exciting time to join PSEG.
Job Summary The Engineering Services (ES) Engineer (Turbine Engineer) reports to the Turbine Engineering Services Manager to provide technical support for the Power Uprate Project for Salem Units 1 and 2 to achieve project scope, schedule, budget and safety goals consistent with Nuclear and Station goals and regulatory requirements. Job Responsibilities Turbine Engineer will perform the following responsibilities in support of the project portfolio: Provide vendor oversight for all aspects of main
steam turbine upgrades from project initiation to installation backss the required scope of work and exploring various alternative solutions.
Review procurement specifications, modification packages, and factory and field testing for quality. Provide field support during modifications walkdowns, installation and testing. Interface with the project stakeholders including Project Management, Operations, Work Management, Maintenance, Design / Plant Engineering, and Licensing. Interface with system engineers to ensure adequate systems integration including preventive maintenance and surveillance program requirements. Support Operations and Maintenance technical procedural changes.
Job Specific Qualifications REQUIRED : BS Degree in Mechanical, Civil or Chemical Engineering or related technical degree with 13 years performing related Engineering work in a nuclear or related industry (including experience in specific discipline) Experience in turbine operation and design with a power plant or vendor. Work effectively with a team to achieve team goals. Support or manage large-scale plant modifications. Independently multi-task and resolve conflicting priorities. Demonstrated Communication and presentation skills. Demonstrated project management skills including Microsoft product usage (Excel, Word, Power Point).
Must meet and maintain Nuclear's requirements for unescorted site access. DESIRED : Project Management experience and/or certification Prior power uprate experience System engineering/test engineer experience and/or qualification PWR SRO license or Certification PE license Disclaimer Certain positions at the Company may require you to have access to Part 810-Controlled Information. Under the law, the Company is limited in who it can share this information with and in certain circumstances it is necessary to obtain specific authorization before the Company can share this information.
Accordingly, if the position does require access to this information, you must complete a 10 CFR Part 810 Export Control Compliance Nationality Request Form, a copy of which will be provided to you by Talent Acquisition if an offer is made. If there is a need for specific authorization, due to the time it takes to obtain authorization from the government, we will likely not be able to further proceed with an offer. PSEG is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic.
Legally protected characteristics include race, color, religion, national origin, interaction, age, marital status, interactionual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals. As an employee of PSEG you should be aware that during storm restoration efforts, you may be required to perform functions outside of your routine duties and on a schedule that may be different from normal operations. PSEG’s drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing.
For employees in federally regulated roles (including positions covered by USDOT, PHMSA, or NRC regulations), this also includes random testing. All drug and alcohol testing for federally regulated roles is inclusive of marijuana. Employees who transfer into a federally regulated role are subject to drug and alcohol testing, inclusive of marijuana. PSEG employees must apply for jobs internally through em Power which can be accessed through sharepoint. by clicking on the em Power icon, then selecting careers. This site ( PSEG Careers and Job Openings ) is strictly for candidates who are not currently PSEG employees, with the exception of PSEG employees who do not have company email addresses.
PSEG is committed to providing reasonable accommodations to individuals with disabilities. If you have a disability and need assistance applying for a position, please call 973-430-xyz X or email xyz X@. If you need to request a reasonable accommodation to perform the essential functions of the job, email xyz X@. Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision.
ADDITIONAL EEO/AA INFORMATION (Click link below) Know your Rights: Workplace Discrimination is Illegal Pay Transparency Nondiscrimination Provision
hybrid roles that are a blend of onsite and remote work, remote local roles that are primarily home-based but require some level of purpose-driven in-person interaction and living within a commutable distance, and remote non-local roles that can be effectively performed remotely with the ability to work in approved states.
PSEG offers a unique experience to our more than 12,000 employees – we provide the resources and opportunities for career development that come with being a Fortune 500 company, as well as the attention, camaraderie and care for one another you might typically associate with a small business. Our focus on combatting climate change through clean energy technology, our
new net zero climate vision for 2030 and enhanced commitment to diversity, equity and inclusion; and supporting the communities we serve make this a particularly exciting time to join PSEG.
Job Summary The Operations Liaison reports to the Engineering Services (ES) Manager to provide operations support for the Power Uprate Project for Salem Units 1 and 2 to achieve project scope, schedule, budget and safety goals consistent with Nuclear and Station goals and regulatory requirements. Job Responsibilities Evaluate proposed plant operational changes and advise on operational risk for proposed project scope. Develop and revise operational procedures. Oversee modification testing development
and implementation. Interface with vendors, Licensing and NRC regarding operational issues, findings, open items and requests.
Interface with Operations Department subject matter experts and stakeholders to identify and resolve potential operational risk to support safe, efficient, cost effective operation of the Salem Units. Review design and proposed license changes for compliance with Technical Specifications and procedure impact. Perform 10CFR50.59 applicability reviews and Station Qualified Reviewer (SQR) reviews. Support implementation outages. Job Specific Qualifications Required: Bachelor's Degree in Engineering, Technical area or equivalent education/experience 13 years of experience.
Prior or current SRO license at Westinghouse PWR technology, preferably at Salem Station. 5 years prior PWR experience Must meet the Nuclear Business Unit requirements for unescorted site access. Qualified (or capable of becoming qualified) as a SQR Reviewer and a 10CFR50.59 Evaluation preparer/reviewer. Preferred: Prior experiences in large plant projects and/or Power Uprates. Disclaimer Certain positions at the Company may require you to have access to Part 810-Controlled Information. Under the law, the Company is limited in who it can share this information with and in certain circumstances it is necessary to obtain specific authorization before the Company can share this information.
Accordingly, if the position does require access to this information, you must complete a 10 CFR Part 810 Export Control Compliance Nationality Request Form, a copy of which will be provided to you by Talent Acquisition if an offer is made. If there is a need for specific authorization, due to the time it takes to obtain authorization from the government, we will likely not be able to further proceed with an offer. PSEG is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic.
Legally protected characteristics include race, color, religion, national origin, interaction, age, marital status, interactionual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals. As an employee of PSEG you should be aware that during storm restoration efforts, you may be required to perform functions outside of your routine duties and on a schedule that may be different from normal operations.
PSEG’s drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing. For employees in federally regulated roles (including positions covered by USDOT, PHMSA, or NRC regulations), this also includes random testing. All drug and alcohol testing for federally regulated roles is inclusive of marijuana. Employees who transfer into a federally regulated role are subject to drug and alcohol testing, inclusive of marijuana. PSEG employees must apply for jobs internally through em Power which can be accessed through sharepoint.
by clicking on the em Power icon, then selecting careers. This site ( PSEG Careers and Job Openings ) is strictly for candidates who are not currently PSEG employees, with the exception of PSEG employees who do not have company email addresses. PSEG is committed to providing reasonable accommodations to individuals with disabilities. If you have a disability and need assistance applying for a position, please call 973-430-xyz X or email xyz X@. If you need to request a reasonable accommodation to perform the essential functions of the job, email xyz X@. Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision.
ADDITIONAL EEO/AA INFORMATION (Click link below) Know your Rights: Workplace Discrimination is Illegal Pay Transparency Nondiscrimination Provision
hybrid roles that are a blend of onsite and remote work, remote local roles that are primarily home-based but require some level of purpose-driven in-person interaction and living within a commutable distance, and remote non-local roles that can be effectively performed remotely with the ability to work in approved states.
PSEG offers a unique experience to our more than 12,000 employees – we provide the resources and opportunities for career development that come with being a Fortune 500 company, as well as the attention, camaraderie and care for one another you might typically associate with a small business. Our focus on combatting climate change through clean energy technology, our
new net zero climate vision for 2030 and enhanced commitment to diversity, equity and inclusion; and supporting the communities we serve make this a particularly exciting time to join PSEG.
Job Summary The Engineering Services (ES) Manager Plant/Design is responsible to the Engineering Services Director for providing supervisory oversight on the governance and oversight of design and plant engineering functions establishing and reinforcing standards and expectations for the safe, reliable, and efficient implementation of the plant design basis and equipment reliability consistent with Nuclear and Station goals. Engineering Manager core responsibilities for the Power Uprate Project : Ensure
qualified engineers are assigned to the project and maintain high quality technical human performance Monitor budget and schedule, approval of requisitions and milestone payments to suppliers Interface with the plant leadership peers to ensure continuous engagement by the plant stakeholders Provide oversight for various vendors and equipment OEMs.
Ensure compliance with regulatory requirements for 50.59, License Amendment Request preparation and any required supporting analysis. Provide oversight and approval for procurement specifications, design analyses, design basis calculations, system modifications, commissioning, closeout activates Job Responsibilities Balance Of Plant (BOP) Manager : Thermal performance of the secondary side of the plant, challenges with increase FW flow Feedwater heaters modification/replacements Booster pump and hotwell pump capacity Setpoint changes review related to transient conditions (runback, load reduction, loss of heater drain pumps) Condenser dump capacity review, TGV DP, MSSVs, FW pumps upgrade Feed Reg Valves backssment, modifications or replacement for increase Cv and/or for the exiting vibration issues Higher turbine exhaust flow and impact on Condenser Condensers Replace FW crossflow with DVR Job Specific Qualifications Bachelor's degree in engineering or Physics Must have 10-15 years of engineering experience within a Commercial or Nuclear Power Plant industry Work effectively with a team to achieve team goals Support or manage large scale plant modifications Independently multi-task and resolve conflicting priorities Demonstrated Communication and presentation skills Demonstrated project management skills including Microsoft product usage (Excel, Word, Power Point).
Must meet and maintain Nuclear's requirements for unescorted site access DESIRED: Project Management experience and/or certification Design Engineering - configuration control qualification System engineering/test engineer experience and/or qualification Experience in PWR NSSS design and operational safety analysis and limitations Disclaimer Certain positions at the Company may require you to have access to Part 810-Controlled Information.
Under the law, the Company is limited in who it can share this information with and in certain circumstances it is necessary to obtain specific authorization before the Company can share this information. Accordingly, if the position does require access to this information, you must complete a 10 CFR Part 810 Export Control Compliance Nationality Request Form, a copy of which will be provided to you by Talent Acquisition if an offer is made.
If there is a need for specific authorization, due to the time it takes to obtain authorization from the government, we will likely not be able to further proceed with an offer. PSEG is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic. Legally protected characteristics include race, color, religion, national origin, interaction, age, marital status, interactionual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals.
As an employee of PSEG you should be aware that during storm restoration efforts, you may be required to perform functions outside of your routine duties and on a schedule that may be different from normal operations. PSEG’s drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing. For employees in federally regulated roles (including positions covered by USDOT, PHMSA, or NRC regulations), this also includes random testing.
All drug and alcohol testing for federally regulated roles is inclusive of marijuana. Employees who transfer into a federally regulated role are subject to drug and alcohol testing, inclusive of marijuana. PSEG employees must apply for jobs internally through em Power which can be accessed through sharepoint. by clicking on the em Power icon, then selecting careers. This site ( jobs. / ) is strictly for candidates who are not currently PSEG employees, with the exception of PSEG employees who do not have company email addresses.
PSEG is committed to providing reasonable accommodations to individuals with disabilities. If you have a disability and need assistance applying for a position, please call 973-430-xyz X or email xyz X@. If you need to request a reasonable accommodation to perform the essential functions of the job, email xyz X@. Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision. ADDITIONAL EEO/AA INFORMATION (Click link below) Know your Rights: Workplace Discrimination is Illegal Pay Transparency Nondiscrimination Provision
