for completeness and accuracy. Convey adequate instructions to enable the design staff to perform their task with quality work. Perform calculations for related discipline under the direction and supervision of an experienced engineer. Perform other job-related duties as assigned.
Education and Experience: Bachelor of Science Degree in a related discipline from an accredited university with 0-3 years of experience in refinery, petrochemical, chemical, offshore, pipeline or utility industries; or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job such as those listed above. License Requirements: Valid Driver's License
as per State law or requirement Engineer Intern (E. I. ) certification preferred Specific Skills: Auto CAD experience preferred. Basic computer skills Microsoft Office and Outlook or similar software.
Knowledge of regulatory codes and requirements for the related discipline preferred. Understanding of basic engineering principles and application. Physical Requirements: Ability to walk up to one mile on industrial plant and construction sites outdoors at any time of the year. Ability to work in protective clothing which may elevate body temperatures by several degrees Fahrenheit for periods of up to 15 minutes without a break. Ability to use multi-level stair towers and rung ladders unassisted.
Ability to hear safety alarms and signals while wearing hearing protection.
Ability to sit at desk and operate computer for extended periods of time. Ability to stand, use hands and fingers, grip, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk and hear. Ability to see with visual acuity and distinguish between colors. Ability to operate a motor vehicle and have a valid driver's license. Ability to lift and carry 15 lbs. on a regular basis is required and at times lifting up to 25 lbs. may be required. Requirements: Due to In-Plant position the below referenced Job Duties have been provided by the client: Candidate will serve as mechanical technical support and assistance to the Quality and Inspection Senior Engineer, and Inspection department.
Review of mechanical integrity reports for fixed equipment (API-570, 510 & 653), PCMS inspection data review, procedure development/review, and inspection work book development. Candidate shall have experience in the following: Knowledge of and experience with fixed mechanical equipment and mechanical systems, national codes, standards and regulations, and their implementation in operating facilities. Willingness to learn PCMS Software Knowledgeable with Microsoft Office software and Tableau.
Participating in activities related to safety, risk backssment and safety incident investigations related to instrumentation equipment. Understand American Petroleum Association (API) Symbols and Process and Instrumentation Diagram and how to read a P&ID. Basic understanding of API codes 570, 510 & 653. Basic understanding of ASME Code Sections II, V, VIII, & IX. Experience in participating in RCFA investigation. Job Requirements Bachelor's degree or higher in Mechanical Engineering At least two (2) years' experience in an industrial setting in fixed equipment engineering.
Recent experience is preferred, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable Valid Driver's License as per State law or requirement Engineer Intern (E. I. ) certification preferred Specific Skills: Auto CAD experience preferred. Basic computer skills Microsoft Office and Outlook or similar software. Knowledge of regulatory codes and requirements for the related discipline preferred. Understanding of basic engineering principles and application. Physical PI4c4bea407e PDN-9ac9c406-b090-485d-81c3-d93af0906375
work scopes for engineering requirements, including package deliverable requirements. Assist with Process Safety Management/Process Hazard Analysis Concisely describing the project requirements by means of engineering sketches and verbal instructions to the design staff.
Presenting this work to the design personnel in an organized form suitable for design by the available personnel. Coordinating and organizing work with other disciplines. Maintaining good working relationships between disciplines. Checking drawing packages for completeness and accuracy. Performing calculations required for their discipline. The ability to check calculations of other engineers for completeness, code compliance
and accuracy. Equipment Specifications and Vendor interaction. Perform other job-related duties as assigned. Education and Experience Bachelor of Science Degree in a related technical field from an accredited university with at least five (5) years of experience in petrochemical, chemical, offshore, pipeline or utility industries; or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job such as those listed above.
License Requirements: Valid Driver's License as per State law or requirement Professional Engineer Intern with professional registration preferred Specific Skills: Knowledge of discipline design codes and other
industry standard discipline related regulatory codes expected.
Auto CAD knowledge with 2 years minimum experience preferred. Process Safety Management/Process Hazard Analysis Proficient in Microsoft Office and Outlook or similar software with preference on spreadsheets, data base and word processing. Familiar with discipline specific compute applications (i. e. ETAP, STAAD, CEASAR, etc. ) Physical Requirements: Ability to walk up to one mile on industrial plant and construction sites outdoors at any time of the year. Ability to work in protective clothing which may elevate body temperatures by several degrees Fahrenheit for periods of up to 15 minutes without a break.
Ability to use multi-level stair towers and rung ladders unassisted. Ability to hear safety alarms and signals while wearing hearing protection. Ability to sit at desk and operate computer for extended periods of time. Ability to stand, use hands and fingers, grip, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk and hear. Ability to see with visual acuity and distinguish between colors. Ability to operate a motor vehicle and have a valid driver's license. Ability to lift and carry 15 lbs. on a regular basis is required and at times lifting up to 25 lbs.
may be required. Requirements: Valid Driver's License as per State law or requirement Professional Engineer Intern with professional registration preferred Specific Skills: Knowledge of discipline design codes and other industry standard discipline related regulatory codes expected. Auto CAD knowledge with 2 years minimum experience preferred. Process Safety Management/Process Hazard Analysis Proficient in Microsoft Office and Outlook or similar software with preference on spreadsheets, data base and word processing. Familiar with discipline specific compute applications (i.
e. ETAP, STAAD, CEASAR, etc. ) Physical PI822ee PDN-9ac9c406-2f3c-47df-a9f8-e085b78de0fa
indsutry for over 24 years. It you would like to see more of what Sigma is about our website can be found at . Sigma is currently looking for an Electrical Engineer (on-site). SUMMARY: To lead engineering project and coordinate the efforts of all the discipline design groups including proposals, scheduling, meetings, cost reports, drawing issue, job closure, invoice review and correspondence.
DUTIES/RESPONSIBILITIES: Prepare scopes of work clarifications for projects Organize and lead project meetings Prepare project memorandums of discussion and action logs Maintain project schedule and establish milestones and deadlines for projects Review drawing packages for qualify, completemess
and inter-discipline projces Assist the prjoect effort in a technical role in their engineering discipline by performing design engineering tasks EDUCATION/SKILLS REQUIRED: Graduation from an accredited four-year college or university with a degree in Electrical Engineering 10+ years of experience in the design and delivery of engineering services, processes and projects wwihtin the petrochemical industry Excercises discretion and independent judgement in matters of significance to work, and have the ability to make decisions as they relate to projects ADDITIONAL REQUIREMENTS: Ability to obtain a TWIC card as required by site Ability to pass an intial background screening and thereafter as required
by site Ability to pass an intial drug/alcohol screening and thereafter as the program requires Maintain basic OSHA safety status Maintain additional safety statuses as required the client Job Posted by Applicant Pro
